GIGAMEDIA GGM CCMLCD17PP Manuel utilisateur
LCD MONITOR / MONITEUR LCD CCTV
GGM CCMLCD17PP LCD monitor CCTV 17” Plastic case
GGM CCMLC17PM LCD monitor CCTV 17” Metal case
GGM CCMLCD18PP LCD monitor CCTV 18,5” 16:9 plastic case
GGM CCMLCD19PP LCD monitor CCTV 19” Plastic case
GGM CCMLCD19PM LCD monitor CCTV 19” Metal case
EN
USER' S MANUAL
MANUEL D’UTILISATION
GGM CCMLCD17PP Moniteur CCTV 17” Boîtier plastique
GGM CCMLC17PM Moniteur CCTV 17” Boîtier métal
GGM CCMLCD18PP Moniteur CCTV 18,5” Format 16/9 boîtier plastique
GGM CCMLCD19PP Moniteur CCTV 19” Boîtier plastique
GGM CCMLCD19PM Moniteur CCTV 19” Boîtier métal
FR
EN
2
www.gigamedia.net
Table of contents
Table of contents ....................................................................................................... Page 02
Warning ................................................................................................................... Page 03
Safety instructions .................................................................................................... Page 04
1. Introduction
1.1. Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 06
1.2. Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 06
1.3. Connection options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 07
1.4. Remote control key functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 07
1.5. Installing batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 08
1.6. External equipment connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 08
2. Basic OSD setup (OSD)
2.1. Turning on and off the monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 10
2.2. Selecting screen language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 10
2.3. No sync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 10
2.4. Selecting input source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 11
2.5. OSD step under VGA input mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 11
2.6. OSD step under AV1/AV2 input mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 12
2.7. OSD step under HDMI input mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 12
3. Trouble shooting .................................................................................................... Page 14
4. Maintenance ......................................................................................................... Page 15
EN
3
www.gigamedia.net
Warning
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING :
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER(OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol equilateral triangle ,within an, is intended to alert the user
to the presence of uninsulated "dangerous voltage" within the products enclosure that may be of suf-
ficient magnitude constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of im-
portant operating and maintenance (servicing) instructions accompanying the appliance .
REGULATORY INFORMATION
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the ins-
tructions, it may cause harmful interference to radio communications however, there is no guarantee that interference will not
occur in a particular installation If this equipment does cause harmfut interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the fol-
lowing measures :
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected,
• Consult the dealer or experienced radio/monitor technician for help.
Any changes or modifications not expressly app roved by the party responsible for compliance could void the user 's
authority to operate the equipment.
CAUTION
Do not attempt to modify this product in any way without written authorization from GIGAMEDIA. Unauthorized modification could
void the user's authority to operate this product.
EN
4
www.gigamedia.net
Safety instructions
WARNING
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Apparatus shall not be exposed to dripping or splashing area.
An objects filled with liquids such as vases shall not be placed on the apparatus.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions
2. Keep these instructions
3. Heed all warnings
4. Follow all instrucions
5. Do not use this apparatus near water
6. Clean only with a dry cloth
7. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions
8. Do not install near any heat source such as radiators, heat registrers, stoves or other apparatus (including amplifiers)
that produce heat
9. Unplug this apparatus during lightning storms or when unused for long period of time.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus
11. Only use the attachments/accessories specified by the manufacturer
12. Refer al l servicing to qualified service personnel.Servicing is required when the apparatus has been damaged in any
way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped
13. Use only with a cart, stand, tripod,bracket, or table specified by the manufacturer, or sold with the apparatus. When a
cart is used, be cautious when moving the cart\apparatus combination 10 avoid injury from lip-over.
14. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one
wider than the other, A grounding type plug has two blades and a third grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong is provided for your safety. When the provided plug does not
fit for your outlet,consult an electrician for replacement of the obsolete outlet.
Note
- If the CCTV monitor feel cold to the touch, there may be a small "flicker" when it is turned on. This is normal,
there is nothing wrong with CCTV monitor.
-Some minute dot defects may be visible on the screen, appearing as tiny red, green or blue spots. However
there have no adverse effect on the monitor's performance.
- Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. In that case, it
may produce some temporary distortion effect on the screen.
EN
5
www.gigamedia.net
CAUTION : CONNECTING THE POWER CORD
Most appliances are suggested to be placed upon a dedicated circuit; that is a single outlet circuit which powers only that
appliance and has no additional outlets or branch circuits,
Do not overload wall outlets! Overloaded wall outets, loose or damaged wall oullets, extension cords, frayed power cords,
damaged or cracded wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically
examine the cord of your appliance, and its if appearance indicates damage or deterioration, unplug it, discontinue use of
the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power
cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walded upon. Pay
particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
ON DISPOSAL
- The fluorescent lamp used in this product contain a small amount of mercury,
- Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of your local au thority.
Note
Picture of the instruction is not totally with product you purchased, real product is referred as standard.
EN
6
www.gigamedia.net
1.2. Accessories
This is a simplified representa tions of front panel.
Here show may be some what different from your monitor.
Ensure that the follow ing accessories are included with your CCTV monitor. lf any accessory is missing .please contact
the dealer from where you purchased the product.
REMOTE CONTROL POWER SUPPLY VGA CABLE
(1,5M)
USER
MANUAL
1. Introduction
1.1. Controls
Item Button Function description
1 Auto Press to select the input source and menu selection
2 - Press to decrease the sound level menu adjustent
3 + Press to increase the sound level menu adjustent
4 Menu Press to bring up the main menu to the screen and exit the current menu
5Power Press to switch on your CCTV monitor when at standby mode or vice versa
6 IR Remote sensor
EN
7
1.4. Remote Control Key Functions
1) POWER : Switch on monitor when at standby mode or vice versa
2) MUTE : Press to mute the sound. Press again or press VOL+ to unmute.
3) 56 : Menu selection
4) 34 :Press to increase I decrease
5) MENU : Press to bring up the main menu to the screen and exit the current menu
6) INPUT : Press to cycle through the input source in following (HDMI, BNC, VGA)
7) PICTURE : Press repeatedly to cycle through the available video picture
1.3. Connection Options
Item Button Function description
1 DN IN DC input socket
2 HDMI HDMI input
3PC-RCB-INPUT Connect the RP-RGB output jack of PC
4 AV1 INPUT Connect the BNC output jack of processor
5 AV2 INPUT Connect the BNC output jack of processor
6 AV OUT Connect the BNC input jack of the other monitor
7AUDIO 1 Audio input
8AUDIO 2 Audio out
www.gigamedia.net
EN
8
www.gigamedia.net
Connect the power cord correctly as shown
Press the POWER switch of your CCTV monitor to switch on the CCTV monitor.
The power indicat ion on the front panel lights is green.
NB: Please note remote control can be different from the reaal product delivered with your monitor
1.6. External Equipment Connections
1.6.1. Power Cord Connection
1.5. Installing Batteries
Open the batte ry compartment cover on the the back side.
Insert two 1.5V AA size batteries in correct polarity. Do not mix old or used batteries with new ones
Close the cover
Point the remote towards the remole control sensor of the wireless monitor and use it
within 7 meters.
Put the used batteries into the recycling bin since it can negatively affect the environment.
EN
9
www.gigamedia.net
This CCTV monitor provides plug and play capability, meaning that the PC adjusts automatically to the monitor's selting.
The CCTV monitor sends configuration information (EDID) to the PC using the Video Electronics Standard Association (VESA)
Display Data Channel (DDC) protocol.
- Connect the BNC in cable output of the DVR to the BNC input on the set.
-Connect the BNC out cable input of the other monitor to the BNC output on the set.
- Select BNC1 or BNC2 input source with using the INPUT button on the remote control.
1.6.3. PC Connection
1.6.2. BNC INPUT and BNC OUTPUT Connection
• Connect the RGB output of the PC to the VGA in
jack on the set.
• Turn on the PC and set.
• Select the VGA input source with using INPUT
button on the remote control.
DVR back
DVR
EN
10
www.gigamedia.net
2.2. Selecting screen language
2.3. No sync
- Press the "MENU” button into main menu.
- Press the “34” button to select OSD menu.
- Press the “56” button to select OSD LANGUAGE.
- Press the“34” button to select your language.
- When you are satisfied with your choice, press MENU to exit.
Note :
If you use your monitor for the first time, you should select the language which will be used for displaying menus and
indications.
There is NO SYNC menu on screen when there is no input signal.
- Connect the AC input cable to monitor, then press the main power switch on monitor. At this time the monitor will
enter into stand by mode and the indicator light turn red.
- Using buttons can turn on monitor from stand by mode as follows: Press POWER key on front panel or on the remote
control.
- Press POWER button on front panel or on the remote control to enter standby mode. The indicator light is red.
- Using main power switch turns off monitor completely.
2. Basic OSD setup
2.1. Turning on and off the CCTV monitor
2.1.1. Turn on monitor
2.1.2. Turn off monitor
Ce manuel convient aux modèles suivants
4
Table des matières
Langues :
