Gigabyte GV-RX80L512V Manuel utilisateur
Copyright
© 2005 GIGABYTE TECHNOLOGY CO., LTD
Copyright by GIGA-BYTE TECHNOLOGY CO., LTD. ("GBT"). No part of this manual may be reproduced or transmitted in
any form without the expressed, written permission of GBT.
Trademarks
Third-party brands and names are the property of their respective owners.
Notice
Please do not remove any labels on VGA card, this may void the warranty of this VGA card
Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet.
The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make
a commitment to update the information contained herein.
User's Manual
Rev. 101
12MD-RX80L512V-101
GV-RX80L512V
Radeon X800 XL Graphics Accelerator
GV-RX80L512V Graphics Accelerator
- 2 -
English
Table of Contents
1. Introduction .........................................................................................3
1.1. Features ..................................................................................................... 3
1.2. Minimum System Requirement .................................................................. 3
2. Hardware Installation...........................................................................4
2.1. Board Layout .............................................................................................. 4
2.2. Hardware Installation ................................................................................... 6
3. Software Installation ............................................................................ 8
3.1. Windows®XP Driver and Utilities Installation ................................................. 8
3.1.1. Operating System Requirement ................................................................................... 8
3.1.2. DirectX Installation .......................................................................................................... 9
3.1.3. Driver Installation .......................................................................................................... 10
3.1.4. Utilities on Driver CD ................................................................................................... 12
3.1.5. Taskbar Icon ................................................................................................................. 15
3.1.6. Display Properties pages ............................................................................................ 18
3.2. Windows®2000 Driver Installation ............................................................. 31
4. Troubleshooting Tips .........................................................................32
5. Appendix ...........................................................................................33
5.1. How to Reflash the BIOS .......................................................................... 33
5.1.1. Reflash BIOS in MS-DOS mode .................................................................................... 33
5.1.2. Reflash BIOS in Windows mode .................................................................................... 33
5.2. Resolutions and Color Depth Table (In Windows®XP) ............................. 34
Introduction- 3 -
English
1. Introduction
1.1. Features
•Powered by ATI X800 XL Visual Processing Unit (VPU)
•Supports the newest PCI Express x 16
•Integrated with 512MB DDRIII memory
•Supports DirectX 9.0
•Supports TV-Out
•Supports AV/S-Video and HDTV output
•Support AV / S-Video input
•Supports D-Sub (by adapter) and DVI-I connector
•Supports HDTV cable
1.2. Minimum System Requirement
•IBM®or 100% PC compatible with Pentium®III 650MHz or AMD Athlon 650MHz
class processor or higher
•One PCI Express x 16 slot
•Operating Systems Win®2000 / Win®XP
•64MB system memory
•50MB of available disk space for full installation
•CD-ROM or DVD-ROM drive
GV-RX80L512V Graphics Accelerator
- 4 -
English
2. Hardware Installation
2.1. Board Layout
Analog LCD Monitor
NTSC / PAL TV
Projector
HDTV VIVO
DVI-I
Connector 2
DVI-I
Connector 1
Digital LCD Monitor
DVI Output
DVI-I to D-Sub
Connector
VGA Output
S-Video Output
Y
Pr
Pb/AV Output
AV Input
S-Video Input
Digital LCD Monitor
DVI Output
Analog LCD Monitor
DVI-I to D-Sub
Connector
VGA Output
VIVO
DVI-I Connector
DVI-I Connector
Hardware Installation- 5 -
English
Expansion cards contain very delicate Integrated Circuit (IC) chips. To
protect them against damage from static electricity, you should follow
some precautions whenever you work on your computer.
1. Turn off your computer and unplug power supply.
2. Use a grounded wrist strap before handling computer components. If you do not
have one, touch both of your hands to a safely grounded object or to a metal object,
such as the power supply case.
3. Place components on a grounded antistatic pad or on the bag that came with the
components whenever the components are separated from the system.
The card contains sensitive electric components, which can be easily damaged by
static electricity, so the card should be left in its original packing until it is installed.
Unpacking and installation should be done on a grounded anti-static mat. The operator
should be wearing an anti-static wristband, grounded at the same point as the anti-
static mat.
Inspect the card carton for obvious damage. Shipping and handling may cause damage
to your card. Be sure there are no shipping and handling damages on the card before
proceeding.
DO NOT APPLY POWER TO YOUR SYSTEM IF IT HAS BEEN DAMAGED ON
THE CARD.
In order to ensure your graphics card working correctly, please use official
Gigabyte BIOS only. Use none official Gigabyte BIOS might cause problem
on the graphics card.
GV-RX80L512V Graphics Accelerator
- 6 -
English
2.2. Hardware Installation
Installing Your Graphics card.
Now that you have prepared your computer, you are ready to install your graphics
accelerator card.
To install your graphics accelerator card:
1. Power off the computer and monitor, then
disconnect the display cable from the back
of your computer.
2. Remove the computer cover. If necessary,
consult your computer's manual for help
in removing the cover.
3. Remove any existing graphics card from
your computer.
Or, if your computer has any on-board
graphics capability, you may need to
disable it on the motherboard. For more
information, see you computer
documentation.
Hardware Installation- 7 -
English
4. Locate the PCI Express x 16 slot. If
necessary, remove the metal cover from this
slot; then align your graphics card with the
PCI Express x 16 slot, and press it in firmly
until the card is fully seated.
5. Replace the screw to fasten the card in
place, and replace the computer cover.
6. Plug the flat panel display cable into your
card; then turn on the computer and monitor.
If you wish to connect a VGA monitor via the
adapter, connect the 15-pin display cable
of the VGA monitor to the VGA connector of
the adapter.
You are now ready to proceed with the installation of the graphics card drivers. Please
refer to next chapter for detailed instructions.
To Flat Panel Display
Warning!
When installing the graphics card, do
not push down the heat pipe. This
may displace the heat pipe and cause
bad contact between the graphics
chip and thermal pad as well as affect
the heat dissipation. To avoid system
instability, do not touch the graphics
card when it is runnnig .
9-Pin for VIVO
GV-RX80L512V Graphics Accelerator
- 8 -
English
3. Software Installation
In this manual, we assume that your CD-ROM Drive letter to be Drive D:
The installation of Windows®2000 / Windows®XP drivers is very simple. When you insert
the driver CD into your CD-ROM drive, you can see the AUTORUN window (if it does not
show up, run "D:\setup.exe"). Then you can follow the guides to setup your graphics card
driver. (Please follow the subsection 3.1.3 "Driver installation" to install the driver for your
graphics accelerator.)
3.1. Windows®XP Driver and Utilities Installation
3.1.1. Operating System Requirement
•When loading the graphics card drivers for the system, please make sure your
system has installed DirectX 9 or later version.
•If you install the graphics card drivers for the motherboard, which consist of SIS, or
VIA chipsets, please install the appropriate driver program for that motherboard.
Or please contact your motherboard nearest dealer for motherboard driver.
Software Installation- 9 -
English
3.1.2. DirectX Installation
Install Microsoft DirectX to enable 3D hardware acceleration support for Windows®2000
or Windows®XP to achieve better 3D performence.
0Note: For software MPEG support in Windows®2000 or Windows®XP, you must install
DirectX first. Users who run Windows XP with a service pack later than Service Pack
one (SP1) do not need to install DirectX separately.
Step 1. When autorun window show up, click the
Install DirectX 9 item.
Click the Install DirectX 9 item.
Step 2. Choose I accept the agreement
and Click "Next" button.
Step 3. Click "Next" button.
Step 4. Click "Finish" to restart computer.
Then the DirectX 9 installation is completed.
Installing the components.
GV-RX80L512V Graphics Accelerator
- 10 -
English
3.1.3. Driver Installation
A. New hardware found
After the graphics card is inserted into your computer at the first time, the windows will
automatically detect a new hardware in the system and pop out a "New Hardware Found"
message. The following is the step-by-step installation guide.
Step 1: Found new hardware wizard: Video controller (VGA Compatible)
Click "Next" button to install the driver. (There is a
driver CD disk that came with your graphics
accelerator, please insert it now.)
Or click the "Cancel" button to install the driver
from AUTORUN window.
Step 2: Found new hardware wizard: Searching and installing
The wizard will search for the driver and install it automatically.
Step 3: Found new hardware wizard: Finish
Click the "Finish" button to finish the installation.
Table des matières
Autres manuels Gigabyte Carte vidéo
Gigabyte
Gigabyte GV-NX66128DP Manuel utilisateur
Gigabyte
Gigabyte GV-NX65128D Manuel utilisateur
Gigabyte
Gigabyte GV-R585D5-1GD-B Manuel utilisateur
Gigabyte
Gigabyte GV-N240SL-1GI Manuel utilisateur
Gigabyte
Gigabyte GV-3D1-68GT Manuel utilisateur
Gigabyte
Gigabyte GV-N55128D Manuel utilisateur
Gigabyte
Gigabyte GV-R545OC-512I Manuel utilisateur
Gigabyte
Gigabyte GV-R487-512H-B Manuel utilisateur
Gigabyte
Gigabyte GV-N430-1GI Manuel utilisateur
Gigabyte
Gigabyte GV-N580UD-15I Manuel utilisateur
Gigabyte
Gigabyte GV-NX88T512H-B Manuel utilisateur
Gigabyte
Gigabyte GV-NX88S320H-B-RH Manuel utilisateur
Gigabyte
Gigabyte GV-N470OC-13I Manuel utilisateur
Gigabyte
Gigabyte GV-R687UD-1GD Manuel utilisateur
Gigabyte
Gigabyte GV-N285OC-2GI Manuel utilisateur
Gigabyte
Gigabyte GV-R557D5-1GI Manuel utilisateur
Gigabyte
Gigabyte GV-R545HM-1GI Manuel utilisateur
Gigabyte
Gigabyte GV-RX16P128P-RH Manuel utilisateur
Gigabyte
Gigabyte GV-R577SL-1GD Manuel utilisateur
Gigabyte
Gigabyte GV-RX30128D Manuel utilisateur
Manuels Carte vidéo populaires d'autres marques
Gainward
Gainward GeForce GTX 690 4GB Manuel utilisateur
ATI Technologies
ATI Technologies RADEON 137-40225-20 Manuel utilisateur
MSI
MSI N220GT series Manuel utilisateur
ATI Technologies
ATI Technologies RADEON 7000 MAC EDITION Manuel utilisateur
SIIG
SIIG aurora Manuel utilisateur
ClearSpeed
ClearSpeed ClearSpeed Advance e720 Manuel utilisateur
