Gigabyte GV-N62256DP2-RH Manuel utilisateur

GV-N62256DP2-RH

GeForce™6200 Graphics Accelerator

User's Manual

Rev. 101

12MD-N622P2R-101R

* The WEEE marking on the product indicates this product must not be disposed of with user's other household waste

and must be handed over to a designated collection point for the recycling of waste electrical and electronic equipment!!

* The WEEE marking applies only in European Union's member states.

without the expressed, written permission of GBT.

Trademarks

Third-party brands and names are the property of their respective owners.

Notice

Please do not remove any labels on VGA card, this may void the warranty of this VGA card

Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet.

The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a

commitment to update the information contained herein.

Macrovision corporation product notice:

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.

Use of this copyright protection technology must be authorized by Rovi Corporation, and is intended for home and other limited

viewing uses only unless otherwise authorized by Rovi Corporation. Reverse engineering or disassembly is prohibited.

GV-N62256DP2-RH Graphics Accelerator - 2 -

English

Table of Contents

1. Introduction ......................................................................................... 3

1.1. Features ..................................................................................................... 3

1.2. Minimum System Requirement ..................................................................... 3

2. Hardware Installation ........................................................................... 4

2.1. Board Layout .............................................................................................. 4

2.2. Hardware Installation ................................................................................... 6

3. Software Installation ............................................................................ 8

3.1. Windows®XP Driver and Utilities Installation ................................................. 8

3.1.1. Operating System Requirement ................................................................................... 8

3.1.2. DirectX Installation .......................................................................................................... 9

3.1.3. Driver Installation ........................................................................................................... 11

3.1.4. Utilities on Driver CD ................................................................................................... 13

3.1.5. Taskbar Icon ................................................................................................................. 15

3.1.6. Display Properties pages ............................................................................................ 18

3.1.7. nView Properties pages .............................................................................................. 23

3.2. Windows®2000 Driver Installation ............................................................. 28

4. Troubleshooting Tips ........................................................................ 29

5. Appendix .......................................................................................... 30

5.1. How to Reflash the BIOS ........................................................................... 30

5.1.1. Reflash BIOS in MS-DOS mode ................................................................................. 30

5.1.2. Reflash BIOS in Windows mode ................................................................................ 30

5.2. Resolutions and Color Depth Table (In Windows®XP) ............................... 31

Introduction- 3 -

English

1. Introduction

1.1. Features

•Powered by NVIDIA®GeForce™6200 Graphics Processing Unit (GPU)

•Supports AGP 8X

•Integrated with 256 MB DDR2 memory

•Supports DirectX 9.0c

•Support AV / S-Video output

•Supports TV-Out and D-Sub (by adapter) connectors

•Supports DVI-I connector

1.2. Minimum System Requirement

•IBM®or 100% PC compatible with Pentium®III 650MHz or AMD Athlon 650MHz

class processor or higher

•One available AGP3.0 compliant slot or better

•Operating Systems Windows®2000 / Windows®XP

•64 MB system memory

•50 MB of available disk space for full installation

•CD-ROM or DVD-ROM drive

GV-N62256DP2-RH Graphics Accelerator - 4 -

English

2. Hardware Installation

2.1. Board Layout

TV-Out

DVI-I Connector

VGA Output

Analog LCD Monitor Analog CRT Monitor

TV-Out

DVI-I Connector

Digital LCD Monitor

DVI Output

S-Video Output

AV Output

NTSC / PAL TV Projector

DVI-I to D-Sub

Connector

Hardware Installation- 5 -

English

Expansion cards contain very delicate Integrated Circuit (IC) chips. To

protect them against damage from static electricity, you should follow some

precautions whenever you work on your computer.

1. Turn off your computer and unplug power supply.

2. Use a grounded wrist strap before handling computer components. If you do not have

one, touch both of your hands to a safely grounded object or to a metal object, such as

the power supply case.

3. Place components on a grounded antistatic pad or on the bag that came with the

components whenever the components are separated from the system.

The card contains sensitive electric components, which can be easily damaged by static

electricity, so the card should be left in its original packing until it is installed.

Unpacking and installation should be done on a grounded anti-static mat. The operator

should be wearing an anti-static wristband, grounded at the same point as the anti-static

mat.

Inspect the card carton for obvious damage. Shipping and handling may cause damage

to your card. Be sure there are no shipping and handling damages on the card before

proceeding.

DO NOT APPLY POWER TO YOUR SYSTEM IF IT HAS BEEN DAMAGED ON

THE CARD.

In order to ensure your graphics card working correctly, please use official

Gigabyte BIOS only. Use none official Gigabyte BIOS might cause problem

on the graphics card.

GV-N62256DP2-RH Graphics Accelerator - 6 -

English

2.2. Hardware Installation

Installing Your Graphics Card.

Now that you have prepared your computer, you are ready to install your graphics accelerator

card.

To remove the existing graphics card:

1. Power off the computer and monitor, then

disconnect the display cable from the back

of your computer.

2. Remove the computer cover. If necessary,

consult your computer's manual for help in

removing the cover.

3. Remove any existing graphics card from

your computer.

Or, if your computer has any on-board

graphics capability, you may need to disable

it on the motherboard. For more information,

see your computer documentation.

Hardware Installation- 7 -

English

You are now ready to proceed with the installation of the graphics card driver. For detailed

instructions, select your operating system from the list below.

To install your new graphics card:

1. Locate the AGP slot. If necessary, remove

the metal cover from this slot; then align your

graphics card with theAGP slot, and press it

in firmly until the card is fully seated.

2. Replace the screw to fasten the card in place,

and replace the computer cover.

To TV or VCR

To Flat Panel Display

3. Plug the display cable into your graphics

card; then turn on the computer and monitor.

To connect a flat panel directly to your graphics

card, use the DVI-I connector. To connect a

VGA monitor to the DVI-I connector, plug

the DVI-I to D-sub adapter into the DVI-I

connector, then plug the monitor cable into

the adapter. Connect a flat panel

Connect a VGA monitor via DVI-I to D-sub adapter

GV-N62256DP2-RH Graphics Accelerator - 8 -

English

3. Software Installation

In this manual, we assume that your CD-ROM Drive letter to be Drive D:

The installation of Windows®2000 / Windows®XP drivers is very simple. When you insert the

driver CD into your CD-ROM drive, you can see the AUTORUN window (if it does not show

up, run "D:\setup.exe"). Then you can follow the guides to setup your graphics card driver.

(Please follow the subsection 3.1.3 "Driver installation" to install the driver for your graphics

accelerator.)

3.1. Windows®XP Driver and Utilities Installation

3.1.1. Operating System Requirement

•When loading the graphics card drivers for the system, please make sure your system

has installed DirectX 9 or later version.

•If you install the graphics card drivers for the motherboard, which consist of SIS or VIA

chipsets, please install the appropriate driver program for that motherboard. Or please

contact your motherboard nearest dealer for motherboard driver.

Software Installation- 9 -

English

Step 2. Choose I accept the agreement and

Click "Next" button.

Step 3. Click "Next" button.

3.1.2. DirectX installation

Install Microsoft DirectX to enable 3D hardware acceleration support for Windows®2000 or

Windows®XP to achieve better 3D performance.

0Note: For software MPEG support in Windows®2000 or Windows®XP, you must install

DirectX first. Users who run Windows XP with Service Pack 2 or above do not need to

install DirectX separately.

Step 1. When autorun window show up, click

the Install DirectX 9 item.

GV-N62256DP2-RH Graphics Accelerator - 10 -

English

Step 4. Click "Finish" to restart computer.

Then the DirectX 9 installation is completed.

Installing the components.

Table des matières

Autres manuels Gigabyte Carte vidéo

Gigabyte

Gigabyte GV-N250-512I Manuel utilisateur

Gigabyte

Gigabyte GV-NX88T512HP Manuel utilisateur

Gigabyte

Gigabyte GV-NX66T128D Manuel utilisateur

Gigabyte

Gigabyte NVIDIA GV-N1060IXOC-6GD Manuel utilisateur

Gigabyte

Gigabyte AMD Radeon HD6870 Manuel utilisateur

Gigabyte

Gigabyte GV-N560SO-1GI-950 2.0 Manuel utilisateur

Gigabyte

Gigabyte GV-RX30HM256DP-RH Manuel utilisateur

Gigabyte

Gigabyte GV-RX60P128DE Manuel utilisateur

Gigabyte

Gigabyte GV-NX62TC256P4-RH Manuel utilisateur

Gigabyte

Gigabyte GV-AV32DG Manuel utilisateur

Gigabyte

Gigabyte GV-N570D5-13I-B Manuel utilisateur

Gigabyte

Gigabyte GV-RX70128D Manuel utilisateur

Gigabyte

Gigabyte GV-RX29T512VH-B Manuel utilisateur

Gigabyte

Gigabyte GV-N98XP-512H-B Manuel utilisateur

Gigabyte

Gigabyte GV-3D1 Manuel utilisateur

Gigabyte

Gigabyte GV-N570UD-13I Rev2.0 Manuel utilisateur

Gigabyte

Gigabyte GV-N26UD-896M Manuel utilisateur

Gigabyte

Gigabyte GV-NX76T128D-RH Manuel utilisateur

Gigabyte

Gigabyte GV-R467D3-1GI Manuel utilisateur

Gigabyte

Gigabyte GV-N62128DP Manuel utilisateur

Gigabyte

Gigabyte GV-R98X256D Manuel utilisateur

Gigabyte

Gigabyte GV-NX73T256P-RH Manuel utilisateur

Gigabyte

Gigabyte GA-MG400 Manuel utilisateur

Gigabyte

Gigabyte GV-R435OC-512I Manuel utilisateur

Manuels Carte vidéo populaires d'autres marques

Gainward

Gainward GeForce GTX 690 4GB Manuel utilisateur

ATI Technologies

ATI Technologies RADEON 137-40225-20 Manuel utilisateur

MSI

MSI N220GT series Manuel utilisateur

ATI Technologies

ATI Technologies RADEON 7000 MAC EDITION Manuel utilisateur

SIIG

SIIG aurora Manuel utilisateur

ClearSpeed

ClearSpeed ClearSpeed Advance e720 Manuel utilisateur

MSI

MSI R7850 series Manuel utilisateur

DVS

DVS Atomix HDMI Manuel utilisateur

Aztech

Aztech VGS3D-AGP Manuel utilisateur

Advoli

Advoli TB4 Standard Manuel utilisateur

ELSA

ELSA ERAZOR III LT Manuel utilisateur

Themis

Themis TGA-7000 PMC Manuel utilisateur

EMS

EMS XtremeRGB-Ex1 Manuel utilisateur

Nvidia

Nvidia Quadro Workstation Manuel utilisateur

Pioneer

Pioneer PDA-5003 Manuel utilisateur

QDI

QDI N2 Manuel utilisateur

NEC

NEC N8116-48 Manuel utilisateur

MSI

MSI R7770 PoweR Edition Manuel utilisateur