Gigabyte GS-SR 125E Manuel utilisateur

GS-SR 125E

Rack Mount Server

System

Installation Guide

GS-SR125E System Installation Guide

Contents

1. SAFE, CARE AND REGULATORY INFORMATION.......................1

2. PREFACE..........................................................................................................6

3. INTRODUCTION...........................................................................................7

3.1. FEATURE OF SCSI MODEL..........................................................................7

4. CONTENTS PACKAGE.............................................................................10

4.1. COMPONENT CONTENT LIST FOR SCSI MODEL .................................10

5. SYSTEM INSTALLATION PROCEDURES .......................................11

5.2. CHASSIS REMOVAL.....................................................................................11

5.3. CPU INSTALLATION...................................................................................12

5.4. HEAT SINK INSTALLATION........................................................................13

5.5. MEMORY INSTALLATION...........................................................................14

5.6. PCI EXPANSION CARD INSTALLATION...................................................15

5.7. REINSTALL TOP COVER.............................................................................17

5.8. SCSI ID SETTING (FORSCSI MODEL ONLY) ....................................18

5.9. HARD DISK DRIVE INSTALLATION..........................................................20

5.10. MOTHERBOARDLAYOUT & JUMPER SETTING..................................22

5.11. APPEARANCEOF GS-SR125E................................................................24

5.11.1. FRONT VIEW OF GS-SR125E................................................................24

5.11.2. REAR VIEW OF GS-SR125E ..................................................................24

5.11.3. LED INDICATOR DESCRIPTION.............................................................25

5.12. FLOPPY DRIVE INSTALLATION (OPTIONAL).......................................28

5.13. CONNECTOR ICON DESCRIPTION..........................................................30

GS-SR125E System Installation Guide

The author assumes no responsibility for any errors or

omissions that may appear in this document nor does the author

make a commitment to update the information contained herein.

Third-party brands and names are the property of their respective

owners.

Third-party brands and names are the property of their

respective owners.

Please do not remove any labels on server system, this may

void the warranty of this server.

Due to rapid change in technology, some of the

specifications might be out of date before publication of this

booklet.

GS-SR125E System Installation Guide

1. Safe, Care and Regulatory Information

Important safety information

Read and follow all instructions marked on the product and in the

documentation before you operate your system. Retain all safety

and operating instructions for future use.

nThe product should be operated only from the type of

power source indicated on the rating label.

nIf your computer has a voltage selector switch, make sure

that the switch is in the proper position for your area. The

voltage selector switch is set at the factory to the correct

voltage.

nThe plug-socket combination must be accessible at all

times because it serves as the main disconnecting device.

nAll product shipped with a three-wire electrical grounding-

type plug only fits into a grounding-type power outlet. This

is a safety feature. The equipment grounding should be in

accordance with local and national electrical codes. The

equipment operates safely when it is used in accordance

with its marked electrical ratings and product usage

instructions

nDo not use this product near water or a heat source.

nSet up the product on a stable work surface or so as to

ensure stability of the system.

nOpenings in the case are provided for ventilation. Do not

block or cover these openings. Make sure you provide

adequate space around the system for ventilation when

you set up your work area. Never insert objects of any kind

into the ventilation openings.

nTo avoid electrical shock, always unplug all power cables

and modem cables from the wall outlets before removing

covers.

nAllow the product to cool before removing covers or

touching internal components.

GS-SR125E System Installation Guide

Precautions for Products With Laser Devices

Observe the following precautions for laser devices:

nDo not open the CD-ROM drive, make adjustments, or

perform procedures on a laser device other than those

specified in the product’s documentation.

nOnly authorized service technicians should repair laser

devices.

Precautions for Products With Modems,

Telecommunications, or Local Area Network

Options

Observe the following guidelines when working with options:

nDo not connect or use a modem or telephone during a

lightning storm. There may be a risk of electrical shock

from lightning.

nTo reduce the risk of fire, use only No. 26 AWG or larger

telecommunications line cord.

nDo not plug a modem or telephone cable into the network

interface controller (NIC) receptacle.

nDisconnect the modem cable before opening a product

enclosure, touching or installing internal components, or

touching an uninsulated modem cable or jack.

Do not use a telephone line to report a gas leak while you

are in the vicinity of the leak.

Federal Communications Commission (FCC)

Statement

Note: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is

operated in a commercial environment. This equipment

GS-SR125E System Installation Guide

generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual,

may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be

required to correct the interference at his own expense.

Properly shielded and grounded cables and connectors must be

used in order to meet FCC emission limits. Neither the provider

nor the manufacturer are responsible for any radio or television

interference caused by using other than recommended cables

and connectors or by unauthorized changes or modifications to

this equipment. Unauthorized changes or modifications could

void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including

interference that may cause undesired operation.

FCC part 68 (applicable to products fitted with USA

modems)

The modem complies with Part 68 of the FCC Rules. On this

equipment is a label that contains, among other information, the

FCC registration number and Ringer Equivalence Number (REN)

for this equipment. You must, upon request, provide this information

to your telephone company.

If your telephone equipment causes harm to the telephone

network, the Telephone Company may discontinue your service

temporarily. If possible, they will notify in advance. But, if

advance notice is not practical, you will be notified as soon as

possible. You will be informed of your right to file a complaint

with the FCC.

Your telephone company may make changes in its facilities,

equipment, operations, or procedures that could affect proper

operation of your equipment. If they do, you will be notified in

advance to give you an opportunity to maintain uninterrupted

telephone service.

The FCC prohibits this equipment to be connected to party lines or

coin-telephone service.

GS-SR125E System Installation Guide

The FCC also requires the transmitter of a FAX transmission be

properly identified (per FCC Rules Part 68, Sec. 68.381 (c) (3)).

/ for Canadian users only /

Canadian Department of Communications Compliance

Statement

This digital apparatus does not exceed the Class B limits for radio

noise emissions from digital apparatus as set out in the radio

interference regulations of Industry Canada.

Le présent appareil numérique n'émet pas de bruits

radioélectriques dépassant les limites applicables aux appareils

numériques de ClasseB prescrites dans le règlement sur le

brouillage radioélectrique édicté par Industrie Canada.

DOC notice (for products fitted with an Industry

Canada-compliant modem)

The Canadian Department of Communications label identifies

certified equipment. This certification means that the equipment

meets certain telecommunications network protective, operational

and safety requirements. The Department does not guarantee the

equipment will operate to the user satisfaction.

Before installing this equipment, users ensure that it is permissible

to be connected to the facilities of the local Telecommunications

Company. The equipment must also be installed using an

acceptable method of connection. The customer should be aware

that compliance with the above conditions might not prevent

degradation of service in some situations.

Repairs to certified equipment should be made by an authorized

Canadian maintenance facility designated by the supplier. Any

repairs or alterations made by the user to this equipment, or

equipment malfunctions, may give the telecommunications

company cause to request the user to disconnect the equipment.

Users should ensure for their own protection that the electrical

ground connections of the power utility, telephone lines and internal

GS-SR125E System Installation Guide

metallic water pipe system, if resent are connected together. This

precaution may be particularly important in rural areas.

Caution: Users should not attempt to make such connections

themselves, but should contact the appropriate electric inspection

authority, or electrician, as appropriate.

NOTICE: The Load Number (LN) assigned to each terminal device

denotes the percentage of the total load to be connected to a

telephone loop which is used by the device, to prevent overloading.

The termination on a loop may consist of any combination of

devices subject only to the requirement that the sum of the Load

Numbers of all the devices does not exceed 100.

/ for European users only /

GS-SR125E System Installation Guide

2. Preface

This installation guide will assist you in installing all the essential

components for rack mount server system. For your protection,

please read and understand allof the safety and operating

instructions regarding your Gigabyte Server and retain for future

reference. The procedures in this guidebook assume that you are

a system or network administrator experienced in installing similar

hardware.

The user’s guide is organized as follows:

Chapter 3 “Introduction” provides the basic product information

and the key features of the product.

Chapter 4“Contents Package”lists the essential hardware

installation components.

Chapter 5 “System Installation Procedure”provides the fully

instructions for configuration hardware to your system.

Table des matières

Autres manuels Gigabyte Serveur

Gigabyte

Gigabyte R152-P31 Manuel utilisateur

Gigabyte

Gigabyte R183-S96-AAD1 Manuel utilisateur

Gigabyte

Gigabyte R283-Z93-AAF1 Manuel utilisateur

Gigabyte

Gigabyte H273-Z81-AAN1 Manuel utilisateur

Gigabyte

Gigabyte S472-Z30 Manuel utilisateur

Gigabyte

Gigabyte Rack Mount Server GS-SR125EDL Manuel utilisateur

Gigabyte

Gigabyte G293-Z41-AAP1 Manuel utilisateur

Gigabyte

Gigabyte R162-ZA1 Manuel utilisateur

Gigabyte

Gigabyte R183-S92-AAD1 Manuel utilisateur

Gigabyte

Gigabyte R182-M80 Manuel utilisateur

Gigabyte

Gigabyte E133-C10-AAA1 Manuel utilisateur

Gigabyte

Gigabyte R283-Z92-AAE1 Manuel utilisateur

Gigabyte

Gigabyte GS-SR326 Guide de l'utilisateur

Gigabyte

Gigabyte R282-2O0 Manuel utilisateur

Gigabyte

Gigabyte R282-N80 Manuel utilisateur

Gigabyte

Gigabyte W131-X30 Manuel utilisateur

Gigabyte

Gigabyte DO22-ST0 Manuel utilisateur

Gigabyte

Gigabyte R183-S90-AAD1 Manuel utilisateur

Gigabyte

Gigabyte R183-Z93-AAD1 Manuel utilisateur

Gigabyte

Gigabyte G152-Z12 Manuel utilisateur

Gigabyte

Gigabyte H263-S62-LAN1 Manuel utilisateur

Gigabyte

Gigabyte G293-Z42-AAP1 Manuel utilisateur

Gigabyte

Gigabyte G293-S46-AAM1 Manuel utilisateur

Gigabyte

Gigabyte G292-Z20 Manuel utilisateur

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur