Ghent Prest Mobile Manuel utilisateur
1/4"-20 X 2" SCREWS WITH WASHERS
(PAGE 1 OF 2)
(2)
Leg
(4)
Caster
(4)
Brace
(1)
Accessory Holder
(6)
1/4-20 x 7/8"
(6)
1/4-20 x 2"
(12)
WASHER
(1)
ALLEN WRENCH
Step 2:
Install the casters on the legs.
Prest Mobile Whiteboard
Instruction Sheet
Step 1:
Remove and unpack the legs, casters, braces, and hardware kit from the packaging, leaving the
whiteboard intact inside the box.
www.ghent.com/install - Lebanon, OH 800-543-0550 IS-PREST (12/19)
(1)
Whiteboard
Step 3:
Install the leg on one side of the whiteboard.
3a. Use the cardboard as a protective work area as you place the whiteboard on its side
3b. Align the legs with the pre-drilled holes on the frame.
3c. Use the screws with washers to attach the legs to the frame, hand tighten with provided allen
wrench.
A
BRACES OVERLAP
1/4"-20 X 7/8" SCREWS WITH WASHERS
Step 5:
Repeat steps 3 and 4 for the opposite side.
Step 6:
Stand the unit upright and attach the accessory holder using the provided magnets.
Step 7:
Recycle all packaging materials in accordance to local regulations.
Step 4:
Install the braces.
4a. Use the screws with washers to attach braces.
4b. Re-tighten all screws with provided wrench.
www.ghent.com/install - Lebanon, OH 800-543-0550 IS-PREST(12/19)
(PAGE 2 OF 2)
Table des matières
Autres manuels Ghent Tableau blanc
Ghent
Ghent Nexus Series Manuel utilisateur
Ghent
Ghent Nexus NEX203ME-FR Manuel utilisateur
Ghent
Ghent 2-Door Rubber Manuel utilisateur
Ghent
Ghent Nexus NEX223MMP Manuel utilisateur
Ghent
Ghent 5' Porcelain Board Manuel utilisateur
Ghent
Ghent FPM1M164 Series Manuel utilisateur
Ghent
Ghent HARMONY PREMIUM GLASS MARKER BOARDS Manuel utilisateur
Ghent
Ghent 3-Door Rubber Manuel utilisateur
Ghent
Ghent Reversible Porcelain Manuel utilisateur
Ghent
Ghent DECO AURORA Series Manuel utilisateur
