Geratech EGE-UHD-1042FS Mode d’emploi

10x2 HDMI 4K UHD Matrix Fast

Switching

EGE-UHD-1042FS

10x2 HDMI 4K UHD Matrix Fast

Switching

EGE-UHD-1042FS

10x2 HDMI 4K UHD Matrix Fast

Switching

EGE-UHD-1042FS

10x2 HDMI 4K UHD Matrix Fast

Switching

EGE-UHD-1042FS

DISCLAIMERS

The information in this manual has been carefully checked and is believed to be

accurate. Geratech assumes no responsibility for any infringements of patents or

other rights of third parties which may result from its use.

Geratech assumes no responsibility for any inaccuracies that may be contained in

this document. Geratech also makes no commitment to update or to keep current

the information contained in this document.

Geratech reserves the right to make improvements to this document and/or product

at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed, stored in a

retrieval system, or any of its part translated into any language or computer le, in

any form or by any means—electronic, mechanical, magnetic, optical, chemical,

manual, or otherwise—without express written permission and consent from

Geratech.

Version 1.0 November 2014

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be trademarks of

the companies with which they are associated.

10x2 HDMI 4K UHD Matrix Fast

Switching

EGE-UHD-1042FS

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate this

equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this equipment:

• Always follow basic safety precautions to reduce the risk of re, electrical shock

and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain, moisture or

install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any openings or

empty slots in the unit, as you may damage parts inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if it is

damaged.

• Do not allow anything to rest on the power cabling or allow any weight to be

placed upon it or any person to walk on it.

• To protect the unit from overheating, do not block any vents or openings in

the unit housing that provide ventilation and allow for sufcient space for air to

circulate around the unit.

REVISION HISTORY

VER-

SION

NO.

DATE (DD/MM/

YY) SUMMARY OF CHANGE

VR0 22/06/15 Preliminary Release

10x2 HDMI 4K UHD Matrix Fast

Switching

EGE-UHD-1042FS

10x2 HDMI 4K UHD Matrix Fast

Switching

EGE-UHD-1042FS

CONTENTS

1. INTRODUCTION ...................................................................... 1

2. APPLICATIONS ........................................................................ 1

3. PACKAGE CONTENTS ........................................................... 1

4. SYSTEM REQUIREMENTS ..................................................... 1

5. FEATURES .............................................................................. 1

6. OPERATION CONTROLS AND FUNCTIONS ......................... 2

6.1 Front Panel ......................................................................... 2

6.2 Rear Panel .......................................................................... 3

6.3 Remote Control .................................................................. 4

6.4 OSD Menu........................................................................... 5

6.5 RS-232 Protocols ............................................................... 8

6.6 IR Pin Denitions ................................................................ 9

6.7 IP Searching Software Application and Installation ............ 9

6.8 Telnet & RS-232 Commands .............................................. 9

6.9 Telnet Control ....................................................................11

6.10 WebGUI Control ............................................................. 12

7. CONNECTION DIAGRAM ..................................................... 14

8. SPECIFICATIONS .................................................................. 15

10x2 HDMI 4K UHD Matrix Fast

Switching

EGE-UHD-1042FS

1. INTRODUCTION

This 10 by 2 HDMI UHD Matrix is an advanced solution for switching up to 10 HDMI

inputs to two HDMI outputs. It provides high performance pass-through of video/audio

and is capable of receiving and transmitting 300MHz/9Gbps bandwidth rate with no data

loss. It’s Fast Switching technology can greatly reduce the time required to swap between

inputs. Supporting the latest features you can be assured of reliable and high quality HDMI

distribution.

2. APPLICATIONS

• Showroom display & control

• Educational demo

• Installation usage

• Advertising display

3. PACKAGE CONTENTS

• 10 By 2 HDMI Matrix Fast Switch

• 1 x IR Extender

• 1 x Remote Control with Battery

• 1 x 5V/2.6A Power Adaptor

• 1 x Left & Right Ear Racks

• Operational Manual

4. SYSTEM REQUIREMENTS

Input source equipment such as DVD/Blu-ray player and output HD display/Monitor

with HDMI cables.

5. FEATURES

• Supports UHD resolutions up to 4K2K@24/25/30Hz & 4K2K YUV420@60Hz

• Supports HDTV resolutions up to 1080@60Hz, ‘Deep Color’ 36/30/24-bit and

PC resolutions up to WUXGA@60Hz(RB)

• Supports 3D

• Supports pass-through of audio formats: LPCM 2/5.1/7.1CH, Dolby Digital

2~5.1CH,

• DTS 2~5.1CH, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos and DTS-HD

Master Audio

10x2 HDMI 4K UHD Matrix Fast

Switching

EGE-UHD-1042FS

10x2 HDMI 4K UHD Matrix Fast

Switching

EGE-UHD-1042FS

• • Supports EDID selection function

• Supports control via IR, RS-232, Telnet and WebGUI controls

• Input port HDCP support Standard and Apple mode. The Apple mode selection

to guarantees the use of Apple devices.

• Compliant with DVI source

• Note: Supporting HDMI to DVI conversion when HDMI sources is non- deep

color and color space RGB

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

1POWER Button

Press this button to switch On or set the device to standby mode.

2POWER LED

This LED will illuminate in green when the device is power On and if it is switched to

standby mode the LED will turn red.

3IR Window

This IR Receiver receives the remote control signal from the package included

remote control only.

4IN 1~10

Press these IN buttons to select an input from the 10 input sources.

5OUT A/B

Press these buttons once a time along with an IN buttons to select an input source

for an output display. i.e. OUTA > IN1 > TAKE or OUTB > IN10 > TAKE.

6CANCLE

Press this button to cancel the IN/OUT selection and during any selection under

MENU.

7TAKE

Press this button to conrm the selection of an IN and an OUT button. If this button

is not pressed the IN & OUT selection will not be executed.

8MENU

Press to enter into the menu selection.

9ENTER

Press to conrm the selection.

10 +/-

Press these buttons to move up/down under menu selection.

10x2 HDMI 4K UHD Matrix Fast

Switching

EGE-UHD-1042FS

11 PRESET

Press this button to recall the preset setting from 1~10. Press and select from

IN1~10 then press TAKE to conrm the recall selection or press CANCEL

to exit the selection. To reset the Preset setting, enter into menu and select Preset

setting from IN1~10 then press OUTA and select an input from IN1~10 then press

OUTB and select an input from IN1~10 again and press ENTER to conrm the

selection. eg. To preset 2’s gure, MENU > ENTER > Matrix Preset > Enter>

Preset2 > IN2 > OUTA > IN8 > OUTB > IN7 > ENTER

12 ALL

Press this button to select all outputs to display with an input source. e.g. To

select all output with input source 3. ALL > IN3

13 MUTE

Press this button to mute video and audio on OUT A or B or on all output.

e.g. To mute output A OUTA > MUTE

14 LOCK

Press this button to lock all button functions on the panel to unlock, press

The button and hold for 3 seconds.

15 LCM

Displaying Input and Outputs selection and menu selection.

6.2 Rear Panel

1HDMI IN

Connect from source equipment such as Blu-ray/DVD/PS3 players, Set-Top-Box or

any HDMI equipped source device for input signal sending.

2HDMI OUT

Connect to HDMI TV/display or HD Amplier for output image and or audio display.

3SERV.

This slot is reserved for rmware update use only.

4CONTROL

Connect from PC/Laptop with active internet service for Telnet or WebGUI control

with RJ-45 terminated cable.

5RS-232

Connect from PC/Laptop for RS-232 command sending to control the device.

6IR IN

Connect the IR Receiver included in the package for IR signal receive from the

included remote control.

7DC 5V

Connect the adaptor included in the package and connect to AC wall outlet for

power supply.

10x2 HDMI 4K UHD Matrix Fast

Switching

EGE-UHD-1042FS

10x2 HDMI 4K UHD Matrix Fast

Switching

EGE-UHD-1042FS

6.3 Remote Control

1POWER

Press this button to switch On or set the device

to standby mode.

2MUTE

Press this button to mute video and audio on

OUT A or B or on all output. e.g. To mute output A

OUTA > MUTE

3OUT A/B

Press these buttons once a time along with an IN

buttons to select an input source for an

output display. i.e. OUTA > IN1 > TAKE or OUTB

> IN10 > TAKE.

4IN 1~10

Press these IN buttons to select an input from the

10 input sources.

5+/-

Press these buttons to move up/down under

menu selection.

6OK

Press to conrm the selection.

7CANCEL

Press this button to cancel the IN/OUT selection

and during any selection under MENU.

8MENU

Press to enter into the menu selection.

9TAKE

Press this button to conrm the selection of an IN and an OUT button. If this button

is not pressed the IN & OUT selection will not be executed.

10 PRESET

Press this button to recall the preset setting from 1~10. Press and select from

IN1~10 then press TAKE to conrm the recall selection or press CANCEL to exit

the selection. To reset the Preset setting, enter into menu and select Preset

setting from IN1~10 then press OUTA and select an input from IN1~10

then press OUTB and select an input from IN1~10 again and press

ENTER to conrm the selection. eg. To preset 2’s gure, MENU > ENTER > Matrix

Preset > ENTER > Preset2 > IN2 > OUTA > IN8 > OUTB > IN7 > ENTER

11 LOCK

Press this button to lock all button functions on the panel to unlock, press the button

and hold for 3 seconds.

12 ALL

Press this button to select all outputs to display with an input source. e.g. To select

all output with input source 3. ALL > IN3

10x2 HDMI 4K UHD Matrix Fast

Switching

EGE-UHD-1042FS

6.4 OSD Menu

Main Menu Sub Menu Description Default

EDID Mode All All Input port is using

same EDID.

In menu “EDID All”, can

select suitable EDID.

All

Appoint Each Input port can

select individual EDID.

In menu “EDID IN1~10”

select suitable EDID.

Exit

EDID All Sink A Copy Output A

display EDID

8/2D/

PCM/1080p

Sink B Copy Output B

display EDID

8/2D/

PCM/720p

Standard EDID, Content:

deep color/2D3D/audio/

native resolution

8/2D/PCM/

AC3/720p

Standard EDID, Content:

deep color/2D3D/audio/

native resolution

8/2D/

PCM/1080p

Standard EDID, Content:

deep color/2D3D/audio/

native resolution

8/2D/PCM/

AC3/1080p

Standard EDID, Content:

deep color/2D3D/audio/

native resolution

8/2D/

PCM/4K2K

Standard EDID, Content:

deep color/2D3D/audio/

native resolution

8/2D/PCM/

AC3/4K2K

Standard EDID, Content:

deep color/2D3D/audio/

native resolution

8/2D/PCM/

Y420

Standard EDID, Content:

deep color/2D3D/audio/

native resolution

8/2D/PCM/

AC3/Y420

Standard EDID, Content:

deep color/2D3D/audio/

native resolution

Exit

EDID IN1 Same EDID All Select Input 1’s EDID Same EDID All

EDID IN2 Same EDID All Select Input 2’s EDID Same EDID All

EDID IN3 Same EDID All Select Input 3’s EDID Same EDID All

EDID IN4 Same EDID All Select Input 4’s EDID Same EDID All

Autres manuels pour EGE-UHD-1042FS

Table des matières

Manuels Accessoires réseau populaires d'autres marques

Valcom

Valcom VIP-804 Manuel utilisateur

SKUTCH

SKUTCH BA-1000 Manuel du produit

QUNDIS

QUNDIS RNN5 Manuel utilisateur

Asus

Asus AAEON FWS-2365 Manuel utilisateur

Sophos

Sophos XG 85w Manuel utilisateur

AMCI

AMCI RBE2-8 Manuel utilisateur

Patton electronics

Patton electronics 2888 Manuel utilisateur

Cradlepoint

Cradlepoint COR IBR1100/IBR1150 Manuel utilisateur

Paradyne

Paradyne Hotwire 8620 Manuel utilisateur

Infra Cool

Infra Cool F-1.3 Manuel utilisateur

Edgewater Networks

Edgewater Networks 4300T Manuel utilisateur

Edimax

Edimax SB-2200g Manuel utilisateur

Extreme Networks

Extreme Networks Mogul-100 Manuel utilisateur

Aaeon

Aaeon FWS-8500 Manuel utilisateur

Panduit

Panduit Z11C Series Manuel utilisateur

F5 BIG-IP 10000 Series Instructions de montage

ZyXEL Communications

ZyXEL Communications NMA1115 Manuel utilisateur

Auerswald

Auerswald COMtrexx Business Manuel utilisateur

geratech EGE-UHD-1042FS Mode d’emploi

Manuels Accessoires réseau populaires d'autres marques