geratech EGE-6UHD-AUD Manuel utilisateur
HDMI 2.0 with HDCP2.2 Audio Converter
with Dolby Digital and DTS 2.0+ Digital Out Decoder
EGE-6UHD-AUD
HDMI 2.0 with HDCP2.2 Audio Converter with
Dolby Digital and DTS 2.0+ Digital Out Decoder
EGE-6UHD-AUD
HDMI 2.0 with HDCP2.2 Audio Converter with
Dolby Digital and DTS 2.0+ Digital Out Decoder
EGE-6UHD-AUD
HDMI 2.0 with HDCP2.2 Audio Converter with
Dolby Digital and DTS 2.0+ Digital Out Decoder
EGE-6UHD-AUD
DISCLAIMERS
The information in this manual has been carefully checked and is believed to be accurate.
Geratech Technology assumes no responsibility for any infringements of patents or other
rights of third parties which may result from its use. Geratech Technology assumes no
responsibility for any inaccuracies that may be contained in this document. Geratech
also makes no commitment to update or to keep current the information contained in this
document. Geratech Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval
system, or any of its part translated into any language or computer le, in any form or by
any means— electronic, mechanical, magnetic, optical, chemical, manual, or otherwise—
without express written permission and consent from
Geratech Technology.
© Copyright 2012 by Geratech Technology.
All Rights Reserved.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be trademarks of the
companies with which they are associated. Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 &
other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the
Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark of DTS,
Inc. Product includes software. © DTS, Inc. All Rights Reserved.
HDMI 2.0 with HDCP2.2 Audio Converter with
Dolby Digital and DTS 2.0+ Digital Out Decoder
EGE-6UHD-AUD
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate this equipment
and before connecting the power supply.
Please keep the following in mind as you unpack and install this equipment:
• Always follow basic safety precautions to reduce the risk of re, electrical shock and
injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain, moisture or nstall this
product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any openings or empty slots
in the unit, as you may damage parts inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any weight to be placed
upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or openings in the unit
housing that provide ventilation and allow for sufcient space for air to circulate around
the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
RDV1 17/07/15 Preliminary Release
30/07/15 Updated text
19/08/15 Updated text
HDMI 2.0 with HDCP2.2 Audio Converter with
Dolby Digital and DTS 2.0+ Digital Out Decoder
EGE-6UHD-AUD
HDMI 2.0 with HDCP2.2 Audio Converter with
Dolby Digital and DTS 2.0+ Digital Out Decoder
EGE-6UHD-AUD
CONTENTS
1. INTRODUCTION ...................................................................... 1
2. APPLICATIONS ....................................................................... 1
3. PACKAGE CONTENTS............................................................ 1
4. SYSTEM REQUIREMENTS ..................................................... 1
5. FEATURES ............................................................................... 2
6. OPERATION CONTROLS AND FUNCTIONS ......................... 2
6.1 Front Panel......................................................................... 2
6.2 Rear Panel.......................................................................... 3
7. CONNECTION DIAGRAM ........................................................ 4
8. SPECIFICATIONS..................................................................... 5
8.1 Technical Specications................................................... 5
8.2 Video Resolutions ............................................................. 6
8.3 Audio Specications ......................................................... 7
8.4 Input to Output Audio Formats ........................................ 7
9. ACRONYMS.............................................................................. 7
HDMI 2.0 with HDCP2.2 Audio Converter with
Dolby Digital and DTS 2.0+ Digital Out Decoder
EGE-6UHD-AUD
1
1. INTRODUCTION
With support for the transmission of 6G video (resolutions up to 4K2K@60Hz Ultra HD,
and HDCP 2.2) through High Speed HDMI cables, this HDMI Audio Converter with Dolby®
Digital/DTS® 2.0+Digital Out Decoder allows an HDMI audio signal to be de-embedded
and simultaneously split to both digital and analog audio outputs providing high quality
audio and video performance. This unit allows you to make the most out of your audio
signal when relaying it to external speakers or to further extend the audio pathway to
another location.
2. APPLICATIONS
• Home entertainment installation
• Audio extraction and extension.
• Connect to non-HDMI AV receivers or wider audio systems
3. PACKAGE CONTENTS
• 1 x HDMI 2.0 with HDCP 2.2 Audio Converter with Dolby Digital and DTS 2.0+ Digital
Out Decoder
• 1×5 V/2.6 A Power Adaptor
• 1×Operation Manual
4. SYSTEM REQUIREMENTS
HDMI equipped source device and display (TV/monitor) and/or amplier/active speakers
with analog or digital audio connection cables.
HDMI 2.0 with HDCP2.2 Audio Converter with
Dolby Digital and DTS 2.0+ Digital Out Decoder
EGE-6UHD-AUD
HDMI 2.0 with HDCP2.2 Audio Converter with
Dolby Digital and DTS 2.0+ Digital Out Decoder
EGE-6UHD-AUD
2
5. FEATURES
• HDMI 6G video (resolutions up to 4K2K@60Hz with YUV444) and HDCP2.2 compliant
• HDMI 1080p video with 12-bit 'Deep Color', 3D video, and HDCP1.4 compliant
• Dolby Digital Decoder technology embedded
• DTS 2.0+Digital Out Decoder technology embedded
• Integrated digital interpolator lter and Digital-to-Analog Converter (DAC)
• Supports HDTV resolutions up to 4K2K (3840×2160@24/25/30, 4096×2160@24/25/30,
3840×2160@50/60 with YUV444 & 4096×2160@50/60 with YUV444)
• Supports simultaneous audio output on HDMI, analog L/R, Coaxial and Optical outputs
• Supports Dolby Digital sampling rates up to 48kHz
• Supports DTS sampling rates up to 96kHz
• Supports LPCM input sampling rates up to 96kHz
• Supports coaxial and optical output audio sampling rates up to 96kHz
• Supports de-embedding the audio signal from an HDTV’s ARC (Audio Return Channel)
connection
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER:
This LED will illuminate when the unit is connected to an active power
supply.
PCM LED: This LED will illuminate when the audio source is encoded in LPCM
2CH audio format.
DTS LED: This LED will illuminate when the audio source is encoded in DTS
2.0+Digital Out audio format.
Dolby LED: This LED will illuminate when the audio source is encoded in Dolby
Digital audio format.
ARC Button & LED: Use this button to select the HDMI ARC (Audio Return
Channel) function. Push this button to enable the HDMI ARC function, the LED will
turn on; push this button again to disable the HDMI ARC function, the LED will turn
off. When no ARC source is detected, the unit will automatically switch back to the
HDMI input.
2
3
4
5
1
HDMI 2.0 with HDCP2.2 Audio Converter with
Dolby Digital and DTS 2.0+ Digital Out Decoder
EGE-6UHD-AUD
3
1
6.2 Rear Panel
HDMI IN: Connect to an HDMI source device such as a blu-ray player, settop
box or any HDMI equipped source device.
HDMI OUTPUT: Connect to an HDMI Ultra HD display (TV/monitor) or UHD AV
receiver for video and audio output.
L/R OUTPUT: Connect to the analog line-level input of an amplier or active
speakers for audio output.
COAX OUTPUT: Connect to the digital optical input of an AV receiver for audio
output.
OPTICAL OUTPUT: Connect to the digital coaxial input of an AV receiver for audio
output.
HDMI AUDIO BYPASS/2CH: Use this switch to select the audio format of the HDMI
output. Switch to 'BYPASS' to allow the audio to pass-through from the HDMI input
port; switch to '2CH' to enable audio decoding and LPCM 2CH down-mixing of
Dolby Digital or DTS audio signals from the HDMI audio source.
SPDIF BYPASS/2CH: Use this switch to select the audio format of the Coaxial and
Optical outputs. Switch to 'BYPASS' to allow the audio to pass-through from the
HDMI input port; switch to '2CH' to enable audio decoding and LPCM 2CH
downmixing of Dolby Digital or DTS audio signals from the HDMI audio source.
EDID STD/TV: Use this switch to select the EDID mode, 'STD (Standard) mode' or
'TV mode'. When in 'TV mode', the unit will automatically detect and store the EDID
settings of the display connected to the HDMI output. If there is no picture or a
distorted image, please switch to 'STD mode' which will use video up to 1080p at
60Hz and audio up to LPCM 2CH at 48kHz, Dolby Digital 5.1CH and DTS 5.1CH.
SERVICE: Manufacturer use only.
DC 5V: Connect the adaptor included in the package to an AC wall outlet for power
supply.
2
3
9
6
7
8
5
10
4
HDMI 2.0 with HDCP2.2 Audio Converter with
Dolby Digital and DTS 2.0+ Digital Out Decoder
EGE-6UHD-AUD
HDMI 2.0 with HDCP2.2 Audio Converter with
Dolby Digital and DTS 2.0+ Digital Out Decoder
EGE-6UHD-AUD
4
7. CONNECTION DIAGRAM
HDMI 2.0 with HDCP2.2 Audio Converter with
Dolby Digital and DTS 2.0+ Digital Out Decoder
EGE-6UHD-AUD
5
8. SPECIFICATIONS
8.1 Technical Specications
Video Bandwidth 600 MHz/6 Gbps
Input Ports 1×HDMI, 1×USB (Service only)
Output Ports 1×HDMI, 1×Coaxial, 1×Optical,
1×L/R (2 RCA)
HDMI Cable Length Input: 10m@1080p, 3m@4K2K
Output: 10m@1080p, 3m@4K2K
Power Supply 5 V/2.6 A DC
(US/EU standards, CE/FCC/UL certied)
ESD Protection
Human body model:
±8kV (air-gap discharge)
±4kV (contact discharge)
Dimensions 180 mm (W)×104 mm (D)×25mm (H)/Jacks Excluded
180mm (W)×112.75 mm (D)×25 mm (H)/ Jacks Included
Weight 374g
Chassis Material Metal
Color Black
Operating Temperature 0 °C~40 °C / 32 °F~104 °F
Storage Temperature −20 °C~60 °C / −4 °F~140 °F
Relative Humidity 20 ~ 90 % RH (non-condensing)
Power Consumption 5.06W
Table des matières
Autres manuels geratech Convertisseur de média
geratech
geratech EGE-11CD Manuel utilisateur
geratech
geratech EGE-SP118-4K6 Manuel utilisateur
geratech
geratech EGE-12VS Manuel utilisateur
geratech
geratech EGE-SCA-VGA-SC-HDM Manuel utilisateur
geratech
geratech EGE-DVI-142DL-144DL Manuel utilisateur
geratech
geratech EGE-6UHD-HDB-SP118 Manuel utilisateur
geratech
geratech EGE-UHD-4HDB-1431L Manuel utilisateur
geratech
geratech EGE-12VS Manuel utilisateur
