GeoVision GV-Keyboard Manuel utilisateur
User's Manual V2.0
GV-Keyboard
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
© 2007 GeoVision, Inc. All rights reserved.
Under the copyright laws, this manual may not be copied, in whole or in part,
without the written consent of GeoVision.
Every effort has been made to ensure that the information in this manual is
accurate. GeoVision is not responsible for printing or clerical errors.
GeoVision, Inc.
9F, No. 246, Sec. 1, Neihu Rd.,
Neihu District, Taipei, Taiwan
Tel: +886-2-8797-8377
Fax: +886-2-8797-8335
http://www.geovision.com.tw
Trademarks used in this manual: GeoVision, the GeoVision logo and GV
series products are trademarks of GeoVision, Inc. Windows and Windows XP
are registered trademarks of Microsoft Corporation.
June 2007
Table of Contents
Regulatory Notices ...................................................................................1
1. Introduction .....................................................................................2
1.1 Packing List ............................................................................................................2
1.2 System Requirements ............................................................................................2
2. System Connections .......................................................................3
2.1 Rear Panel Overview..............................................................................................3
2.2 Connecting GV-Keyboard to One GV-System ........................................................4
2.3 Connecting GV-Keyboard to Multiple GV-Systems.................................................5
2.4 Wall Terminal Block.................................................................................................6
3. Installation .......................................................................................7
3.1 USB Driver..............................................................................................................7
3.2 GV-Keyboard Application........................................................................................9
3.2.1 Defining Eight Function Keys.......................................................................10
3.2.2 Printing Function Key Labels .......................................................................10
4. ID & Password Settings in DVRs .................................................. 11
5. Keyboard Overview.......................................................................12
6. Programming and Operation.........................................................15
7. On-Screen Display Menus ............................................................16
7.1 The OSD in Main System .....................................................................................16
7.2 The OSD in ViewLog ............................................................................................17
8. Shortcut Key Conflict Test .............................................................18
9. Troubleshooting ............................................................................19
10. Specifications ................................................................................20
Regulatory Notices
1
Regulatory Notices
FCC Notice
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment.
Class A
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at their own
expense.
CE Notice
This is a Class A product. In a domestic environment, this product may cause radio
interference in which case the user may be required to take adequate measures.
RoHS Compliance
The Restriction of Hazardous Substances (RoHS) Directive is to forbid the use of hazardous
materials of production. To meet the RoHS Directive requirements, this product is made to be
RoHS compliant.
WEEE Compliance
This product is subject to the Waste Electrical and Electronic Equipment (WEEE) Directive
and made compliant with the WEEE requirements.
2
1. Introduction
The GV-Keyboard is used to program and operate GV-Systems. Through RS-485
configuration, it can control up to 16 additional GV-Systems.
1ALL
123
456
78
0
9
AB
-
REC
REC STOP
SCH
SCH STO P
F1 F2 F3 F4 F5 F6 F7 F8
Zoom
In
Zoom
Out
Focus
In
Focus
Out
Aut o
Focus
Aut o Preset
Home
OK
Cancel
Menu
Sp eed +
Sp eed -
RX TX
P1 P2 P3 P4 P5
1.1 Packing List
•GV-Keyboard x 1
•Power Adaptor (AC Input 110-240V to DC Output 12V, 1A) x 1
•USB Cable x 1
•RJ-11 Cable x 1
•RS-232 Cable x 1
•Wall Terminal Block x 1
•GV-Keyboard User’s Manual x 1
1.2 System Requirements
•Windows 2000, XP or Vista
•GV-System V7.0 or above
System Connections
3
2
2. System Connections
2.1 Rear Panel Overview
Figure 1
No Name Function
1 Joystick Used for PTZ control.
2 DC 12V Connects to the power adaptor.
3 USB Port Connects to GV-System.
4 RJ-11 Port (RS-485) The RJ-11 port carries RS-485 signals. Through the wall
terminal block, it can connect up to 16 additional
GV-Systems.
5 Terminal Resistance Used in the last daisy-chained GV-System.
6 RS-232 Connects to GV-System.
7 Reset Resets the Keyboard when it does not respond to
commands.
4
2.2 Connecting GV-Keyboard to One GV-System
There are three ways to connect the Keyboard to one GV-System by:
1) USB Port,
2) RJ-11 Port (DC power required) , or
3) RS-232 Port (DC power required)
GV-System
GV-Keyboard
Figure 2
* USB cable, and RJ-11(RS-485) cable are supplied with the GV-Keyboard.
System Connections
5
2
2.3 Connecting GV-Keyboard to Multiple GV-Systems
To connect the Keyboard to up to 16 additional GV-Systems within 600 meters, use the RJ-11
Port, and plug in the power adapter.
RS-485+
RS-485-
Connects to PC's
Power Supply
RS-232 (COM port)
GV-NET Card **
RS-485+
RS-485-
Connects to PC's
Power Supply
RS-232 (COM port)
GV-NET Card **
Wall Terminal
Block *
RJ-11 Cable *
GV-System 1
GV-System 16
GV-Keyboard
Figure 3
* The RJ-11 cable and Wall Terminal Block are supplied with the GV-Keyboard.
** The GV-NET card can be replaced with other GV products, such as GV-NET, GV-NET/IO
card, GV-Hub and GV-COM.
6
2.4 Wall Terminal Block
16
Figure 4
Note: When you are using the wall terminal block for connection, the RS-485 + and
RS-485 - cables should be attached to the terminal screws Pin 4 and Pin 3 respectively.
Table des matières
Autres manuels GeoVision Clavier
