GeoSIG GMS plus Guide d'installation

FAQ GMSplus How to Connect Serial Console with uCon

1. Introduction

This procedure describes how to connect the serial console of a GMSplus to a computer.

2. Required Tools

RS-232 Cable, straight

RS-232 to USB Adaptor (recommended ist Aten UC232A)

Windows Computer with installed terminal software, recommended is uCon (http://www.umonfw.com/ucon/)

Any other serial port terminal software may work as well

3. Connect GMSplus

Connect the serial cable to the CONSOLE connetor of your GMSplus

4. Find COM port in Windows

In Windows under Device Manager-> Ports (COM & LPT), your Aten UC232 appears as ATEN USB to Serial Bridge

Remember the COM port of the ATEN USB to Serial Bridge

If the device doesn't show or shows as UNKNOWN or appears under "Other Devices" with yellow exclamation mark, the

correct driver may need to be installed: https://www.aten.com/global/en/supportcenter/info/downloads/?

action=display_product&pid=575

5. Connect with uCon

Turn on your GMSplus

Start uCon terminal software

Choose the COM port of your ATEN USB to Serial Bridge

Choose baud rate 115.2K from the dropdown

Press [OK] to connect

6. Navigating the console

If the startup process of the instrument is finished, you can press [ENTER] key on your keyboard

The main menu will appear

Each menu point has a letter assigned

Press the key of the menu you want to select (e.g. [C] to enter the configuration menu, press [C] again to edit current

configuration)

Always confirm your selection pressing [ENTER]

At the bottom of each sub-menu, further navigation options are listed

7. Save and apply configuration changes

Press [Esc] to exit the configuration menu

Press [C] to save the configuration as "current"

In the main menu, press [R] to restart the instrument

After the restart, the configuration changes are applied

Autres manuels pour GMS plus

Table des matières

Autres manuels GeoSIG Équipement d'enregistrement

GeoSIG

GeoSIG GMSela Guide d'installation

Manuels Équipement d'enregistrement populaires d'autres marques

KV2 Audio

KV2 Audio 500 Series Manuel utilisateur

Robotics Technologies

Robotics Technologies microBus-Cam II Manuel utilisateur

Seca

Seca 460 Manuel utilisateur

Cognex

Cognex MVS-8000 Series Manuel utilisateur

Mect

Mect MPNC006 Series Manuel utilisateur

Bad Caf

Bad Caf THE LEASH Manuel utilisateur

Strymon

Strymon NIGHTSKY Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuel utilisateur

Tews Technologies

Tews Technologies TPMC465 Manuel utilisateur

Honeywell

Honeywell Excel 50 Manuel utilisateur

SeaLevel

SeaLevel COMM+8.LPCI Manuel utilisateur

Arturia

Arturia AUDIOFUSE STUDIO Manuel utilisateur

Rukra

Rukra RK-1240 Manuel utilisateur

Samson

Samson SCOM Manuel utilisateur

Dynacord

Dynacord DPS260 Manuel utilisateur

Nice

Nice Core Manuel utilisateur

Pyle Pro

Pyle Pro PSS8 Manuel utilisateur

RF-System

RF-System TinyGate Manuel d'utilisation et d'entretien