Genius KYE Systems GG00A5 Instructions d'utilisation et d'installation

English

4. Aer press buon on the remote control to enter the Bluetooth mode. If

there is a paired device, it will return to the paired device. If there is no paired

device, it will enter the pairing mode.

5. Pairing: In the Bluetooth status, long press buon on the remote control for 3

seconds. When the speaker will make a nocaon sound, it indicates that the

current pairing device is released and the pairing mode is entered. The blue and red

LEDs ash alternately. At this me, Bluetooth device pairing can be performed.

6. TWS Operation Function:

Two speakers are powered on. Enter the Bluetooth mode, set one as the master

speaker, and the other as the slave speaker. The slave speaker must be in the state

without any equipment connected, and the master speaker is unlimited. There are

connected devices and no connected devices. Long press the key on the main

speaker for 3 seconds. At this me, the main speaker will make a nocaon sound,

and the two speakers can be connected. When the slave speaker is connected to the

main speaker, the slave speaker will emit two beeps, indicang that the connecon

is successful. Aer the speakers are connected, if the main speakers have connected

devices and the two speakers have blue LEDs on, the master speakers can control

the slave speakers and play. If there is no equipment connected to the main speaker,

the blue and green LEDs of the two speakers will ash alternately. At this me, the

main speaker must be connected to audio equipment. The main speaker is

connected to audio equipment. The two speakers have blue LEDs on. The main

speaker can control the slave speakers and can also play.

English

Turn oTWS Funcon:

Long press key on the main speaker for more than 3 seconds. Aer a

nocaon sound from the speaker, the blue and red LEDs on the secondary

speaker ash alternately, indicang that the TWS funcon is disabled.

7. Pairing, TWS, previous song, next song these funcons only work under Bluetooth

status.

8. Aer power on, short press buon on the remote control to enter the

Bluetooth mode, short press the buon on the remote control to enter the

LINE mode.

9. Reset :

(If the TWS has been paired, please release the TWS funcon rst, the reset funcon

can work normally.) In the Bluetooth status, press and hold the and keys

for 3 seconds, there will make a nocaon sound, which means that all memories

have been cleared and the Bluetooth state is entered. The red LED ashes and you

can pair the Bluetooth device.

10.Turn o: Unplug the power supply and the LED is o.

二、Button Function

English

Status

Function

Button Operation

Description

Turn oTurn on

The red LED is on

when the USB power

code of speaker is

plugged in, and

enters LINE mode by

default.

The red LED is on when you

turn on, and enters LINE

mode.

Power on Bluetooth Short press

buon

Blue and red LEDs ash

alternately and enter pairing

status.

Power on Line Short press

buon

Red LED always on, enters to

LINE mode.

Power on

Turn o

Unplug power

LED turn o

2 Bluetooth

/ Line

Increase

Volume

Short press the

buon

Long press the

buon

Short press the buon

to increase volume.

Long press the to

increase volume

connuously.

3 Bluetooth

/ Line

Decrease

Volume

Short press the

buon

Long press the

buon

Short press the buon

to increase volume.

Long press the to

increase volume

connuously.

4 Bluetooth Previous

Track

Double-click

buon quickly

Enter to previous track

5 Bluetooth

Next Track

Double- click

buon quickly

Enter to next track

Play music Pause Short press the

buon

Short press buon to

stop playing music, click

again to resume playback.

Line Mute

hort press the

on

Short press the buon

enters to mute status. Press it

again, the music unmute.

7 Bluetooth PAIR Long press

buon for 3 seconds

When the speaker will make

anocaon sound, it means

that the current pairing

device is canceled; the blue

and red LEDs ash

English

Status

Function

Button Operation

Description

alternately, enters the pairing

status.

Bluetooth Reset

Long press and hold

the and

keys for 3 seconds

(If the TWS has been paired,

please release the TWS

funcon rst, the reset

funcon can work normally.)

In the Bluetooth status, press

and hold the and

keys for 3 seconds, there will

make a nocaon sound,

which means that all

memories have been cleared

and the Bluetooth state is

entered. The red LED ashes

and you can pair the

Bluetooth device.

8 Bluetooth TWS Long press key

for 3 seconds

Long press key for 3

seconds.A er a nocaon

sound from the speaker, the

LED ash alternately, enters

TWS pairing status.

Long press key on the

main speaker for more than 3

seconds. Aer a nocaon

sound from the speaker, the

blue and red LEDs on the

secondary speaker ash

alternately, indicang that

the TWS funcon is disabled.

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules.Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference,and

(2) This device must accept any interference received, including interference that may cause

undesired operation.

2. any Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, maycause harmful interferenceto radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

Reorient or relocate thereceiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance 20cm

between theradiator & your body

Table des matières

Autres manuels Genius KYE Systems Intervenants

Genius KYE Systems

Genius KYE Systems SP-F120 Manuel utilisateur

Genius KYE Systems

Genius KYE Systems SP-HF1250X Manuel utilisateur

Genius KYE Systems

Genius KYE Systems SP-F350 Manuel utilisateur

Genius KYE Systems

Genius KYE Systems SP-i350 Manuel utilisateur

Genius KYE Systems

Genius KYE Systems Genius SP-i170 Manuel utilisateur

Genius KYE Systems

Genius KYE Systems SP-S350 Manuel utilisateur

Genius KYE Systems

Genius KYE Systems Genius SP-N120 Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur