Genie GS-3384 Manuel utilisateur
Operator's Manual
GS
-
3384 CE
GS
-
3390
GS
-
4390
GS
-
5390
with
Maintenance
Information
Original Instructions
Fifth Edition
First Printing
Part No. 1278050GT
Operator's Manual Fifth Edition • First Printing
GS-3384 • GS-3390 • GS-4390 • GS-5390 Part No. 1278050GT
Front Matter
Contents
Introduction ........................................................... 1
Symbol and Hazard Pictorials Definitions............. 5
General Safety ...................................................... 7
Personal Safety..................................................... 9
Work Area Safety................................................ 10
Legend ................................................................ 18
Controls............................................................... 19
Inspections.......................................................... 24
Operating Instructions......................................... 34
Transport and Lifting Instructions ....................... 40
Maintenance ....................................................... 43
Specifications...................................................... 46
Copyright © 2002 Terex Corporation
Fifth Edition: First Printing, December 2016
Genie is a registered trademark of Terex South Dakota, Inc. in
the U.S.A. and many other countries. “GS” is a trademark of
Terex South Dakota, Inc.
Complies with EC Directive 2006/42/EC
See EC Declaration of Conformity
Fifth Edition • First Printing Operator's Manual
Introduction
Part No. 1278050GT GS-3384 • GS-3390 • GS-4390 • GS-5390 1
Introducti on
About this manual
Genie appreciates your choice of our machine for
your application. Our number one priority is user
safety, which is best achieved by our joint efforts.
This book is an operation and daily maintenance
manual for the user or operator of a Genie
machine.
This manual should be considered a permanent
part of your machine and should remain with the
machine at all times. If you have any questions,
contact Genie.
Product Identification
The machine serial number is located on the serial
label.
Serial number
stamped on chassis
Serial label location under
chassis cover
Intended Use
This machine is intended to be used only to lift
personnel, along with their tools and materials to
an aerial work site.
Bulletin Distribution and
Compliance
Safety of product users is of paramount
importance to Genie. Various bulletins are used by
Genie to communicate important safety and
product information to dealers and machine
owners.
The information contained in the bulletins is tied to
specific machines using the machine model and
serial number.
Distribution of bulletins is based on the most
current owner on record along with their
associated dealer, so it is important to register your
machine and keep your contact information up to
date.
To ensure safety of personnel and the reliable
continued operation of your machine, be sure to
comply with the action indicated in a respective
bulletin.
Operator's Manual Fifth Edition • First Printing
Introduction
2 GS-3384 • GS-3390 • GS-4390 • GS-5390 Part No. 1278050GT
Contacting the Manufacturer
At times it may be necessary to contact Genie.
When you do, be ready to supply the model
number and serial number of your machine, along
with your name and contact information. At
minimum, Genie should be contacted for:
Accident reporting
Questions regarding product applications and
safety
Standards and regulatory compliance information
Current owner updates, such as changes in
machine ownership or changes in your contact
information. See Transfer of Ownership, below.
Transfer of Machine Ownership
Taking a few minutes to update owner information
will ensure that you receive important safety,
maintenance and operating information that
applies to your machine.
Please register your machine by visiting us on the
web at www.genielift.com or by calling us toll free
at 1-800-536-1800.
Fifth Edition • First Printing Operator's Manual
Introduction
Part No. 1278050GT GS-3384 • GS-3390 • GS-4390 • GS-5390 3
Danger
Failure to obey the instructions and
safety rules in this manual will result
in death or serious injury.
Do Not Operate Unless:
You learn and practice the principles of safe
machine operation contained in this operator’s
manual.
1 Avoid hazardous situations.
Know and understand the safety rules
before going on to the next section.
2 Always perform a pre-operation inspection.
3 Always perform function tests prior to use.
4 Inspect the workplace.
5 Only use the machine as it was intended.
You read, understand and obey the
manufacturer’s instructions and safety
rules—safety and operator’s manuals and
machine decals.
You read, understand and obey employer’s
safety rules and worksite regulations.
You read, understand and obey all applicable
governmental regulations.
You are properly trained to safely operate the
machine.
Safety Sign Maintenance
Replace any missing or damaged safety signs.
Keep operator safety in mind at all times. Use mild
soap and water to clean safety signs. Do not use
solvent-based cleaners because they may damage
the safety sign material.
Operator's Manual Fifth Edition • First Printing
Introduction
4 GS-3384 • GS-3390 • GS-4390 • GS-5390 Part No. 1278050GT
Hazard Classification
Decals on this machine use symbols, color coding
and signal words to identify the following:
Safety alert symbol—used to alert
you to potential personal injury
hazards. Obey all safety
messages that follow this symbol
to avoid possible injury or death.
Indicates a hazardous situation
which, if not avoided, will result in
death or serious injury.
Indicates a hazardous situation
which, if not avoided, could result
in death or serious injury.
Indicates a hazardous situation
which, if not avoided, could result
in minor or moderate injury.
Indicates a property damage
message.
DANGER
WARNING
CAUTION
NOTICE
Fifth Edition • First Printing Operator's Manual
Symbol and Hazard Pictorials Definitions
Part No. 1278050GT GS-3384 • GS-3390 • GS-4390 • GS-5390 5
Symbol and Hazard P ictorials Definiti ons
Read the operator’s
manual
Read the service
manual
Crush hazard Crush hazard Collision hazard
Tip-over hazard Tip-over hazard Tip-over hazard Tip-over hazard Electrocution hazard
Electrocution hazard Explosion hazard Fire hazard Burn hazard Skin injection hazard
Engage safety arm Keep away from
moving parts
Keep clear of
outriggers and tires
Move machine to
level ground
Close chassis tray
Lower the platform Do not set up where it
cannot be leveled with
outriggers
Maintain required
clearance
Access by trained
and authorized
personnel only
Use a piece of
cardboard or paper to
search for leaks
Operator's Manual Fifth Edition • First Printing
Symbol and Hazard Pictorials Definitions
6 GS-3384 • GS-3390 • GS-4390 • GS-5390 Part No. 1278050GT
Chock the wheels Release brakes Tiedown Lanyard anchorage
points
No smoking
Wheel load Transport diagram Side force Wind speed Outrigger load
Voltage rating for
power to platform
Pressure rating for air
line to platform
Maximum capacity Crushing hazard
Hold rail while lowering
Fifth Edition • First Printing Operator's Manual
General Safety
Part No. 1278050GT GS-3384 • GS-3390 • GS-4390 • GS-5390 7
General Safety
82562
82476
82474
114251
97719
1263542
82487
114371114338
133537
82487 114371
114338
114337
133537
82474
82474
1263542
82562
82476
114251
Operator's Manual Fifth Edition • First Printing
General Safety
8 GS-3384 • GS-3390 • GS-4390 • GS-5390 Part No. 1278050GT
82562
82474
82476
82487
82475
82475 82560
114337
82560
82562
82474
82487
82475
114337
82476
1278048
1278048
GS-3384/GS-3390 - 82971
82811
82871
*82872
*82874
GS-4390 - 82972
GS-5390 - 82974
Autres manuels pour GS-3384
5
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels Genie Système de levage
Genie
Genie AWP-15S Manuel utilisateur
Genie
Genie GS-2646 AV Manuel utilisateur
Genie
Genie Z-45/25 Manuel utilisateur
Genie
Genie GTH-1048 Manuel utilisateur
Genie
Genie Super-Straddle Manuel utilisateur
Genie
Genie TZ-34/20 Manuel utilisateur
Genie
Genie Z-80/60 Manuel utilisateur
Genie
Genie Superlift SL-5 Guide de démarrage rapide
Genie
Genie GS-2046 Manuel utilisateur
Genie
Genie Load Lifter 5.5 Manuel utilisateur
Genie
Genie GS-3384 Manuel utilisateur
Genie
Genie S-120 Guide de configuration
Genie
Genie S-65 Manuel utilisateur
Genie
Genie Z-34/22N Manuel utilisateur
Genie
Genie GS-2032 Guide de configuration
Genie
Genie GS-2046 Manuel utilisateur
Genie
Genie GS-3384 Manuel utilisateur
Genie
Genie IWP Super Series Manuel utilisateur
Genie
Genie Z-45 Manuel utilisateur
Genie
Genie GS-2646AV Manuel d'installation et d'exploitation
Manuels Système de levage populaires d'autres marques
morse
morse 82H-124 Manuel utilisateur
Braun
Braun NL955 Series Manuel utilisateur
haacon
haacon 1889.10 Manuel utilisateur
Protekt
Protekt AT 252 Manuel utilisateur
R. Beck Maschinenbau
R. Beck Maschinenbau HS 600 Manuel utilisateur
Nova Technology International, LLC
Nova Technology International, LLC NAS Series Manuel utilisateur
Screen Technics
Screen Technics INTERFIT Vertical Up Lift Manuel utilisateur
Mortuary Lift
Mortuary Lift ULTIMATE 1000 Manuel utilisateur
Custom Equipment
Custom Equipment Hy-Brid 3 Series Manuel de programmation
Custom Equipment
Custom Equipment Hy-Brid Lifts 2 Series Manuel de programmation
Hy-Brid Lifts
Hy-Brid Lifts HB-P3.6 Manuel de programmation
BERG
BERG BeNomic EasyLeaf Manuel utilisateur
