Genetec Synergis IX Manuel utilisateur
Synergis IX Card Reader
SY-SIX-TSEC
Installation Manual
SY-SIX-TSEC | Synergis IX Card Reader | Installation Manual
Last Updated July 2018 2
The contents of this guide are furnished for informational use only and are subject to change without notice.
Genetec assumes no responsibility or liability for any errors or inaccuracies that may appear in the
informational content contained in this guide.
Genetec reserves the right to revise and improve its products as it sees fit. This document describes the state
of a product at the time of document’s last revision, and may not reflect the product at all times in the future.
In no event shall Genetec be liable to any person or entity with respect to any loss or damage that is incidental
to or consequential upon the instructions found in this document or the computer software and hardware
products described herein. The use of this document is subject to the disclaimer of liability found in the
end-user license agreement.
This publication may not be copied, modified, or reproduced in any form or for any purpose, nor can any
derivative works be created therefrom without Genetec’s prior written consent.
Copyright © 2018 Genetec.
SY-SIX-TSEC | Synergis IX Card Reader | Installation Manual
Last Updated July 2018 3
Contents
Introduction ............................................................................................................................. 5
Synergis IX Card Reader Editions ......................................................................................... 6
MIFARE Technology ............................................................................................................... 7
About MIFARE .............................................................................................................................................. 7
MIFARE/DESfire Products ........................................................................................................................... 7
Secured MIFARE Card Format .................................................................................................................... 7
About MIFARE DESFire EV1 ....................................................................................................................... 7
Mounting .................................................................................................................................. 8
Mounting Instructions ................................................................................................................................... 8
Vandal Resistant Cover Mounting ................................................................................................................ 8
Reader Connection ............................................................................................................... 12
Wiegand Connection .................................................................................................................................. 12
Wiegand Reader Connection (Entry / Exit) ................................................................................................. 13
RS-485 Reader Locations .......................................................................................................................... 14
RS-485 Reader Connection ....................................................................................................................... 14
RS-485 Connection (Entry/Exit) ................................................................................................................. 15
RS-485 Connection ............................................................................................................... 16
Installer Programming .......................................................................................................... 17
Entering RS-485 Programming Mode ........................................................................................................ 17
Entering 125kHz Programming Mode ........................................................................................................ 17
125kHz Reading Mode ............................................................................................................................... 18
DESFire Reading Mode .............................................................................................................................. 19
MIFARE Reading Mode .............................................................................................................................. 20
Interface ...................................................................................................................................................... 20
LED Function .............................................................................................................................................. 21
Intelligent Tamper ....................................................................................................................................... 22
PIN Data Interface ...................................................................................................................................... 22
SY-SIX-TSEC | Synergis IX Card Reader | Installation Manual
Last Updated July 2018 4
Backlight ..................................................................................................................................................... 23
Default Sector (MIFARE Classic only) ........................................................................................................ 23
Encryption Keys (MIFARE Classic only) .................................................................................................... 23
Custom Format (MIFARE Classic only) ...................................................................................................... 24
Factory Reset ............................................................................................................................................. 25
Output Mode ............................................................................................................................................... 25
Clone Card Notify ....................................................................................................................................... 25
Clone Card Reading ................................................................................................................................... 25
Clone Card Destroy .................................................................................................................................... 26
Custom RS-485 Format .............................................................................................................................. 26
Save and Restart ........................................................................................................................................ 27
Technical Diagram ................................................................................................................ 28
Technical Specifications ...................................................................................................... 29
New Zealand and Australia .................................................................................................. 31
European Standards ............................................................................................................. 32
FCC Compliance Statements ............................................................................................... 34
Industry Canada Statement ................................................................................................. 35
SY-SIX-TSEC | Synergis IX Card Reader | Installation Manual
Last Updated July 2018 5
Introduction
The Synergis IX Card Reader is an advanced-technology, high-frequency smart card radio frequency
identification device (RFID), specifically designed to enhance the functionality of security, building automation
and access control by providing multiple format compatibility, high-speed data transmission and sabotage
protection.
The Reader is designed to operate as a Wiegand proximity reader or using intelligent RS-485 communications
and can be programmed to read and output different card formats.
Before installing this product, we highly recommend you read this manual carefully and ensure that the data
formats you program will operate with the configured access control or security product.
Current features include:
Multi card technology provides support for DESFire, MIFARE, and 125KHz cards
Encrypted RS-485, un-encrypted configurable RS-485 or standard Wiegand connection
Configurable LED strip: 2 Color control via External LED Wiring, 16 color selectable for Synergis Function
Codes (RS-485 connection only)
Keep alive transmission every 30 seconds for intelligent tamper management
Fully encapsulated design with environment IP Rating of IP65 for outdoor and indoor operation
Programmable via programming cards
Keypad output on Wiegand data lines (keypad versions only)
SY-SIX-TSEC | Synergis IX Card Reader | Installation Manual
Last Updated July 2018 6
Synergis IX Card Reader Editions
The Synergis IX Card Reader comes in two main sizes and with a range of optional features.
Keypad MIFARE/DESFire
Standard 115 x 45 x 18mm (4.53 x 1.77 x 0.71")
SY-SIX-TSEC-STD-DF-B
Standard DESFire Card Reader
SY-SIX-TSEC-STD-DF-KP-B
Standard DESFire Card Reader with Keypad
SY-SIX-TSEC-STD-DF-KP-VRC
Standard DESFire Card Reader with Keypad and Vandal Resistant
Cover
Extra 115 x 73 x 18mm (4.53 x 2.87 x 0.71")
SY-SIX-TSEC-EXTRA-DF-KP-B
Extra DESFire Card Reader with Keypad
SY-SIX-TSEC | Synergis IX Card Reader | Installation Manual
Last Updated July 2018 7
MIFARE Technology
About MIFARE
Based on the international standard ISO/IEC 14443 Type A, MIFARE is a technology used for contactless
RFID smart card systems consisting of card and reader components.
Fully compliant with the international standard ISO/IEC 14443 Type A
Multi-application memory to store several services on the same card allowing many integration
possibilities
Fast transaction speed
High security and fraud protection
MIFARE/DESfire Products
The MIFARE/DESfire products can be expanded to accommodate large numbers of modules using the
encrypted RS-485 Network. Genetec provides a number of reader and tag/card options in the
MIFARE/DESfire range.
Cards
MIFARE 1K (S50) Proximity Clamshell Card
MIFARE 1K (S50) Proximity Card ISO
MIFARE 1K (S50) Proximity Card ISO Mag
MIFARE 1K (S50) Proximity Standard Key Tag
MIFARE/DESfire Cards
MIFARE/DESfire EV1 Proximity Card ISO2K
Secured MIFARE Card Format
Secured MIFARE is the compromise between secured card and cost. Card data is protected with a diversified
authentication key and encrypted with an AES256 algorithm. These cards are not as secure as DESFire EV1
but still provide high security against cloning. This card mode can be used on all MIFARE 1K (S50) cards and
tags.
About MIFARE DESFire EV1
MIFARE DESFire EV1 is an ideal solution for service providers wanting to use multi-application smart cards in
transport schemes, e-government or identity applications. It complies fully with the requirements for fast and
highly secure data transmission, flexible memory organization, and interoperability with existing infrastructure.
Fully compliant with the international standard ISO/IEC 14443 Type A 1-4
Available in 2, 4 and 8 Kbytes EEPROM version with fast programming
Secure, high speed command set
Unique 7-byte serial number
Open DES/3DES crypto algorithm in hardware
Open AES 128 bits crypto algorithm in hardware
SY-SIX-TSEC | Synergis IX Card Reader | Installation Manual
Last Updated July 2018 8
Mounting
The Reader is intended to provide the reading component of access control, time and attendance and alarm
systems. It is intended to be mounted on a wall with adequate air flow around and through it.
Mounting Instructions
1. Select where to mount the Reader, ensuring it is mounted a minimum of 1.1m (3.5ft) away from other
wiring, such as ACM power, computer data wiring, telephone wiring and wiring to electric lock devices.
Use the template sticker provided with the Reader as a guide to correctly position the unit.
2. Hold the rear case half against the wall and mark the mounting holes and cable entry area. The cable
entry area should align with a hole cut through the plaster wall-board. Cables are intended to be run
inside the wall. Use appropriate screws (not supplied) to affix the case to the wall.
3. Run the wiring. Refer to later sections of this manual for the electrical connections. Leave about 20cm (8")
of wire protruding through the center of the mounted half of the case.
4. Connect the wiring to the reader electronics, then use the top case to press gently on the bottom mounted
case until the screw hole for securing the top and bottom case together lines up.
5. To complete the installation, use the M3 x 8mm Plastite screw provided with the Reader to secure and
fasten the top case to the bottom mounted case.
Vandal Resistant Cover Mounting
An optional vandal resistant cover is available for the Reader. The vandal resistant covers are designed to
protect the reader in the harshest of environments and to prevent malicious damage and are compliant to
DHF TS 001:2013 ENHANCED REQUIREMENTS & TEST METHODS FOR ANTI-LIGATURE HARDWARE
to grade B4 for vertical direction devices and to impact level IK10. The vandal resistant covers are suitable for
mounting the Reader on interior or exterior walls.
Regular keypad variations of the Reader range do not operate correctly with the vandal resistant covers. You
must order the reader (including cover) using the following part code:
SY-SIX-TSEC-STD-DF-KP-VRC
SY-SIX-TSEC | Synergis IX Card Reader | Installation Manual
Last Updated July 2018 9
Other keypad variants will not operate correctly.
Mini Size Vandal Resistant Cover
88mm / 3.46”
127mm / 5”
29mm / 1.14”50mm / 1.96”
29mm / 1.14”
69mm / 2.71”
6X 5.2mm / 0.2”
Mounting Holes
20mm / 0.78”
SY-SIX-TSEC | Synergis IX Card Reader | Installation Manual
Last Updated July 2018 10
Mullion Size Vandal Resistant Cover
29mm / 1.14”41.5mm / 1.63”41.5mm / 1.63”29mm / 1.14”
91 / 3.58”
162mm / 6.37”
70mm / 2.75”
8X 5.2mm / 0.2”
Mounting Holes
22.6mm / 0.88”
Autres manuels pour Synergis IX
1
Table des matières
