Genesis CCTV BC-540WDR Manuel utilisateur
Box Camera :
Day/Night w/PIXIM’s WDR
Vision with Integrity
www.genesiscctv.com
2
Thank you for purchasing Wide Dynamic Camera. Before using the camera, please read this operation
manual carefully to obtain the best result and keep this manual for future reference.
Table of Contents
FEATURES ······························································· 3
NAME & FUNCTION ················································ 4
REAR VIEW & FUNCTION ······································· 6
Lens Connector ······················································· 8
LENS INSTALLATION ··············································9
Mounting a Lens ···················································· 10
Back-Focus Adjustment ······································· 11
CAMERA INSTALLATION ····································· 12
Installation & Tripod Mounting Base
OSD Manual ·························································· 13
SPECIFICATION ····················································31
SUPPLIED ACCESSORIES···································· 33
3
FEATURES
• Superior Images even in tough back light conditions
• 1/3" Digital Pixel System & Innovative 32 Bit DSP
• Wide Dynamic Range : 95dB(14Bit), 120dB Max.
• More than 540TVL of Horizontal Resolution
• High speed, automatic 5 level exposure control for each pixel
• Multiple camera options, including premium class of WDR using Digital Pixel System
• Wide Range of visible scene in real time
• Good Smearless even in the presense of strong light.
• Catch the image of fast moving object.
• Motion Detection and Digital Pan/Tilt/Zoom
• On Screen Menu and Camera ID
• C/CS Mount Lens Available
• 12VDC/24VAC Dual Power(Non-polarity)
4
NAME & FUNCTION
(Front Panel)
5
1. Lens mount
Mount for lens installation. See page 9.
2. Lens connector
When using an auto iris lens, connect the lens cable to this connector. See page 8.
3. Back-Focus screw
Screw it after adjusting the back-focus to fix the setting. See page 11.
4. Tripod mounting base
Mounting base for camera installation. See page 12.
6
REAR VIEW & FUNCTION
7
1. Video output connector
BNC connector that outputs a composite video signal.
2. Enter
3. OSD control
Push arrow keys to move the cursor to left, right, up and down.
4. Power input terminal
Connect to 12VDC or 24VAC power source. When operating with 12VDC or 24VAC power supply, use
only an isolated power source. (Be sure not to connect the power source until all other connections are
completed)
5. Lens select switch
When using an auto IRIS lens, set the switch according to the lens type.
VIDEO : Set to this position when using a Video type lens.
DC : Set to this position when using a DC (galvanometric) type lens.
8
Lens Connector
When using an auto IRIS lens, connect the lens cable to the lens connector.
•
Video IRIS type lens
:
Set lens switch to VIDEO, and put the lens cable into the lens connector.
If the plug on the cable is a different type, replace it with the provided 4-pin
iris plug.
• DC IRIS type lens :
Set lens switch to DC, and put the lens cable into the lens connector.
If the plug on the cable is a different type, replace it with the provided 4-pin
iris plug.
• Pin Assignment •
VIDEO Iris type Lens
•
DC Iris type Lens
Pin No.
1
2
3
4
Signal
+9V DC (50mA max)
NC
Video
GND
Pin No.
1
2
3
4
Signal
Damping coil(-)
Damping coil(+)
Drive coil(+)
Drive coil(-)
9
LENS INSTALLATION
• Please connect a lens cable when using the DC type
lens or VIDEO type lens.
• When using the VIDEO type lens, please adjust a
brightness of image by volume attached with the lens.
10
1. Mounting a lens
Remove the lens mount cap from the camera
Attach the lens to the mount. Secure it so that it does not become loose
- C Mount lens : Turn the adaptor ring to counterclockwise.
- CS Mount lens : Turn the adaptor ring to clockwise.
If the lens has an auto-IRIS mechanism, connect the lens connector.
- When installing a Video-IRIS lens, lens switch should be set to VIDEO
position.
- When installing a DC IRIS lens, lens switch should be set to DC
position.
2. Adjusting Auto-IRIS Lenses
Make this adjustment after connecting the camera to a power source and a monitor.
Set AGC mode to off.
When using a Video type lens : Adjust the level on the lens to produce minimum smear and optimum
pictures.
When using a DC type lens : Adjust the video level on the rear panel to produce minimum smear and
optimum pictures.
Set AGC mode to on. It is recommended that AGC be used in the “on” mode after adjusting the video level.
Table des matières
Autres manuels Genesis CCTV Caméra de sécurité
Genesis CCTV
Genesis CCTV IDC-700VIR Manuel utilisateur
Genesis CCTV
Genesis CCTV HD-IR3VB Manuel utilisateur
Genesis CCTV
Genesis CCTV VDC-700VIR Manuel utilisateur
Genesis CCTV
Genesis CCTV IDC-550VIR Manuel utilisateur
Genesis CCTV
Genesis CCTV External Control Type Manuel utilisateur
Genesis CCTV
Genesis CCTV Standard type Manuel utilisateur
Genesis CCTV
Genesis CCTV BC-540DNI Manuel utilisateur
