Generalscan Scanbuddy GS-X3 Manuel utilisateur
Quick Start Guide
VERSION: 2.1
2
Copyright
No part of this publication may be reproduced or used in any form, or
by any electrical or mechanical means, without permission in writing.
This includes electronic or mechanical means, such as photocopying,
recording, or information storage and retrieval systems. The material in
this manual is subject to change without notice.
The software is provided strictly on an “as is” basis. All software,
including firmware, furnished to the user is on a licensed basis. We grant
to the user a non-transferable and non-exclusive license to use each
software or firmware program delivered hereunder (licensed program).
Except as noted below, such license may not be assigned, sublicensed, or
otherwise transferred by the user without our prior written consent. No
right to copy a licensed program in whole or in part is granted, except
as permitted under copyright law. The user shall not modify, merge,
or incorporate any form or portion of a licensed program with other
program material, create a derivative work from a licensed program, or
use a licensed program in a network without written permission. The
user agrees to maintain this copyright notice on the licensed programs
delivered hereunder, and to include the same on any authorized
copies it makes, in whole or in part. The user agrees not to decompile,
disassemble, decode, or reverse engineer any lcensed program delivered
to the user or any portion thereof.
3
Generalscan reserves the right to make changes to any product to
improve reliability, function, or design.
Generalscan does not assume any product liability arising out of, or
in connection with, the application or use of any product, circuit, or
application described herein.
No license is granted, either expressly or by implication, estoppel, or
otherwise under any patent right or patent,covering or relating to any
combination, system, apparatus, machine, material, method, or process
in which Generalscan products might be used. An implied license exists
only for equipment, circuits, and subsystems contained in Generalscan
products.
Generalscan and the Generalscan graphic are registered trademarks
of Generalscan. The Generalscan logo is a registered trademark of
Generalscan Technologies, Inc., a Generalscan Technologies company.
All trademarks and service marks are proprietary to their respective
owners. Bluetooth is a registered trademark of Bluetooth SIG. Google,
Android are either registered trademarks or trademarks of Google
Corporation. All other product or service names are the property of their
respective owners.
Thanks for you use Generalscan all series of mobile barcode scanning
product!
4
This quick start guide provides basic instructions for how to use the
scanner, charging, setting up, programming and etc.
Please be sure to read this quick start guide before you use our product in
first time.
Please reference the related chapter for your model.
If you have any question and advice, please our distributor, system
More detail production information, please visit the following web site
:http://www.generalscan.com
5
Bluetooth Barcode Companion Series
GS-M100BT
GS-M300BT-PRO
GS-M500BT
Quick Start Guide
6
Charging
Before using the Generalscan Bluetooth barcode companion which include
GS-M100BT, GS-M300BT, GS-M500BT for the first time, please charge the
battery using micro-USB cable until the red charging LEDs light is off. You
can plug the USB-A cable into any PC USB port or Android smartphone
charging adapter with 5V DC output.
Model GS-M100BT GS-M300BT GS-M500BT
Interface Micro-USB Micro-USB Micro-USB
Charging Voltage DC-5V 0.3A DC-5V 0.3A DC-5V 0.5A
Battery Volume 500mAh 500mAh 550mAh
Charging Time 3-5 hour 3-5 hour 3-5 hour
Working Time(10s
interval trigger with
good decode)
12 hour 14 hour 13 hour
7
Scanning Techniques
Please aim at the middle of the barcode through the red light when scan
the barcode.
Please scan properly in accordance with the following diagram,adjust the
scanner angle and distance slowly, at the same time, press the trigger
button, make the centre red light cover the left to right of the barcode.
Do not use the second image to scan barcode.
8
Scanning Techniques
1.Aim the scanner at the barcode
2.Press the trigger button to scan the barcode
3.Ensure trhe aiming dot is centered on the barcode.
Note: Aiming point of GS-M500BT is blue rectangle, GS-M500Pro is red
dot.
9
①
②
③
④
⑤
⑥⑦
⑧
Scanning Window
Buzzer Hole
Trigger Button
LEDs Indicator
Strap Hole
Micro-USB
for Charging
Power Switch
Buckle for Adapter
Product Outlook
10
Item Name Description
1Scanning
Window
Reading barcode ,Red light or Laser will beam
out from this window
2 Buzzer Hole
The buzzer will sound when good decoded：
（1）Connect USB cable，buzzer will
beep“b....b.b.”；
（2）Good decoed：Flashing green light and
buzzer one time.
3Trigger
Button
Press the trigger button to scan the barcode
one time,double click to hide and display soft
keyboard in iOS device like iphone or iPad.
4LEDs
Indicator
LED has three color (Red,Green,Blue) which
indicate with different scenario.Please reference
the following table for detail description
5 Strap Hole Fix strap into this hole
Function Description
Ce manuel convient aux modèles suivants
10
Table des matières
Autres manuels Generalscan Lecteur de codes-barres
Generalscan
Generalscan GS-M100BT Manuel utilisateur
Generalscan
Generalscan MiniRing GS R5000BT-51C Manuel utilisateur
Generalscan
Generalscan X Series Manuel utilisateur
Generalscan
Generalscan FS01&MS3391-L Manuel utilisateur
Generalscan
Generalscan GS WT5000X Manuel utilisateur
Generalscan
Generalscan GS-M100BT Manuel utilisateur
Generalscan
Generalscan R1000BT Series Manuel utilisateur
Generalscan
Generalscan GS-X Series Manuel utilisateur
Manuels Lecteur de codes-barres populaires d'autres marques
POSMicro
POSMicro Datalogic PowerScan D7100 Manuel utilisateur
Marson
Marson MT780 Guide de configuration rapide
NCR
NCR RealPOS Manuel utilisateur
Motorola
Motorola SE3300 Guide de configuration rapide
Element
Element P130BT Manuel utilisateur
Motorola
Motorola Symbol LS3008 Manuel d'installation et d'exploitation
