GENERAL DIGITAL MK-06V-100 Manuel utilisateur
The Innovators of Flat Panel Technology
TM
User’s Manual
OEM Monitor Kit™
Open Frame LCD Monitor Kit
MK-06V Series
MK-08V Series
MK-10V Series
MK-10S Series
MK-12S Series
Manual P/N: 01-800
Revision 1.0
The Innovators of Flat Panel Technology
TM OEM Monitor Kit™User’s Manual
2
Please take a moment...
...to record the following information in the space provided below. Should the need
arise to contact General Digital™ regarding your LCD monitor, this information will
help us to better serve you. You will find the model number/serial number label affixed
to the rear of your monitor.
Model Number: _______________________________________________________________
Serial Number: _______________________________________________________________
Date Received: _______________________________________________________________
Trademarks
All trademarks in this publication are the property of their respective companies.
Copyright
Information in this document is subject to change without notice.
© 2004 General Digital™Corporation. All rights reserved.
Reproduction in any manner whatsoever without the written permission of General
Digital™Corporation is strictly forbidden.
Disclaimer
General Digital™Corporation shall not be liable for errors contained herein or for inci-
dental or consequential damages in connection with the furnishing, performance, or
use of this material.
Appropriate Usage Policy
General Digital™Corporation components should not be used in medical devices with
life support functions, safety equipment (or similar applications where component
failure would result in loss of life or physical harm), aerospace equipment, telecom-
munication equipment (trunk lines) or nuclear power control equipment. Contact a
General Digital™representative before using General Digital™devices for any applica-
tions other than those recommended by General Digital™. General Digital™assumes no
responsibility for any damage resulting from the use of a General Digital™device which
does not comply with the instructions and precautions specified in this manual.
The Innovators of Flat Panel Technology
TM OEM Monitor Kit™User’s Manual
3
Precautions .........................................................................4
Package Contents................................................................6
Installation .........................................................................7
Connections........................................................................8
Troubleshooting ...............................................................11
Specifications....................................................................12
Options & Accessories .....................................................14
Mechanical Drawings.......................................................15
Warranty...........................................................................19
Contact Information ........................................................21
Table of Contents
The Innovators of Flat Panel Technology
TM OEM Monitor Kit™User’s Manual
4Precautions
Installation
General Digital™recommends that you install or leave the monitor:
• In a place free of extreme temperatures, i.e., away from radiators, heating vents,
direct sunlight.
• In a place free of mechanical vibration and shock.
• In a place far from any equipment that generates a strong magnetic field.
• In a place free of inordinate amounts of dust, dirt or sand, i.e., an open window or
outdoor exit. If setting up temporarily in an outdoor environment, be sure to take
adequate precautions against airborne dust and dirt.
• On a stable surface where the monitor will be safe from tipping over.
• Ensure that vents are kept free of obstruction and airflow remains unrestricted at
all times.
• If the unit is equipped with a grounded AC line input connector, ensure that
a reliable grounding path is maintained. Units so equipped are intended to be
connected to ground.
• Ensure that the unit is located where the temperature remains within the recom-
mended ambient temperature range listed in the Specifications.
Characteristics of the LCD Screen
• Keep the LCD from facing direct sunlight for extended periods as this can damage
the screen.
• The LCD screen may lose uniformity or otherwise malfunction if pushed,
scratched or has a heavy object set upon it.
• If the monitor is used in a cold place, a residual image may appear on the screen.
This is not a malfunction. The screen returns to normal as the temperature rises to
a normal operating level.
• If a still picture is displayed for a long time, a residual image may appear for a
while. The residual image will eventually disappear.
• The LCD panel becomes warm during operation. This is not a malfunction.
Important Notes on the LCD Screen Characteristics
Please be aware that, although the LCD screen is made with high precision technology, the
manufacturer’s specifications allow for slight optical anomalies. If your LCD screen exhibits
any minor anomalies, it is not an indication of a malfunction. General Digital™ inspects each
screen to even more rigid specifications than the manufacturer’s and will not ship any product
found to be substandard.
Also, optimal performance is achieved after the monitor has reached a stable internal operating
temperature. At ambient room temperature (72° F/22° C), this may require as long as
30–60 minutes.
The Innovators of Flat Panel Technology
TM OEM Monitor Kit™User’s Manual
5Precautions(continued)
Replacement of the Fluorescent Tube
A specially designed fluorescent tube is installed as the lighting apparatus for this mon-
itor. If the screen becomes dark, unstable or does not turn on, replace the fluorescent
tube with a new one. Consult General Digital™when replacing the fluorescent tube.
Maintenance
• Be sure to unplug the power cord from the power outlet before cleaning your
monitor.
• Clean the LCD screen with a soft cloth. If you use a glass cleaning liquid, refrain
from using any type of cleaner containing an antistatic solution or similar additive
as this may scratch the LCD’s screen coating.
• Clean the cabinet, panel and controls with a soft cloth lightly moistened with a
mild detergent solution. Do not use any type of abrasive pad, scouring powder or
solvent, such as alcohol or benzine.
• A scratched LCD surface may result if the screen surface is rubbed, touched or
tapped with sharp or abrasive items such as ballpoint pens or screwdrivers.
• Note that material deterioration or LCD screen coating degradation may occur
if the monitor is exposed to volatile solvents such as insecticide, or if prolonged
contact is maintained with rubber or vinyl materials.
Transportation
• Disconnect all cables from the monitor and grasp the support and base sections
of the display stand firmly with both hands when transporting. If you drop the
monitor, you may be injured or the monitor may be damaged.
• When you transport this monitor for repair or shipment, use the original carton
and packing materials. Failure to do so may void the warranty.
Usage Recommendations
• When unused for extended periods of time, set your PC to DPMS. If using a screen
saver, set it to the active screen mode.
• For each hour of looking at the monitor, let your eyes rest for 5 minutes. This will
reduce eye fatigue.
Disposal of the Monitor
The fluorescent tube used in this monitor contains mercury. Disposal of this
monitor must be carried out in accordance with the regulations of your local
sanitation authority. Do not dispose of this monitor with general household
waste.
The Innovators of Flat Panel Technology
TM OEM Monitor Kit™User’s Manual
6Package Contents
Please take a moment to ensure that you have received the following items. Report any
discrepancies immediately.
One (1) OEM Monitor Kit™model from one of the following LCD monitor families:
MK-06V Series
MK-08V Series
MK-10V Series
MK-10S Series
MK-12S Series
One (1) Documentation CD with User’s Manuals and LCD Monitor Calibration &
Setup Guides in PDF format; and Adobe®Acrobat®Reader software, which is used for
viewing the documentation
One (1) AC Line Cord, 6'7" (unless a custom length is ordered)
One (1) Shipping Container
Also included will be any options and/or accessories you ordered with your monitor.
Please refer to the packing slip for a complete listing of items shipped.
IMPORTANT!
Please save your custom-designed shipping container for warranty returns as
needed. Shipping in an unauthorized container may void the warranty.
The Innovators of Flat Panel Technology
TM OEM Monitor Kit™User’s Manual
7Installation
1) Install your monitor into the desired panel, console or enclosure of your choosing
using the provided mounting holes on the perimeter of the mounting panel.
2) Attach a shielded video cable (connected at one end to your computer, work-
station or composite NTSC/PAL video source) to the video connector(s) located
on the rear of the LCD monitor.
3) First, attach the DC power supply to the unit. Then plug one end of the supplied
line cord into the AC socket located on the rear of the DC power supply and the
other end into a grounded 110/220V AC outlet.
4) Activate the LCD monitor by pressing the On/Off button located on the
membrane keypad or calibration button pad.
Note: The yellow/red LED (STANDBY) located on the membrane keypad will illuminate
if the video cable is not attached or an invalid video source is connected to the monitor.
The green LED (POWER) will illuminate if proper power and a valid video source have
been applied to the system.
5) Although factory-calibrated for optimal image quality, from time to time you
may need to override the factory default settings of your monitor. To adjust the
monitor settings, please refer to the LCD Monitor Calibration & Setup Guide
for your unit. The Documentation CD packaged with your monitor will explain
how to determine the appropriate document.
The Innovators of Flat Panel Technology
TM OEM Monitor Kit™User’s Manual
8Connections
General Digital’s™LCD monitors are equipped with several types of connectors to suit
a variety of purposes. To reference the information about the connectors on your unit,
simply match the connectors on your unit with the photos on these pages.
AC Power Connector/Line Entry Filter (IEC type)
GD Part No.: 16-011/16-020
Manufacturer: Corcom/Corcom
Manufacturer Part No.: PS0SSSS30/PS0SSSS6B
16-011/16-020
DC Power Input Connector: 6-pin Circular
Enclosure Mating Connector
GD Part No.: 30-356 30-357
Manufacturer: Hirose Hirose
Manufacturer Part No.: RM12BRD-6S RM12BPG-6PH
30-356
PIN NUMBER SIGNAL
1 +12 VDC
2 +12 VDC
3 Ground
4 Ground
5—
30-357
6—
The Innovators of Flat Panel Technology
TM OEM Monitor Kit™User’s Manual
9Connections(continued)
DC Power Input Connector: 3-pin 3W3
Enclosure Mating Connector
GD Part No.: 30-425/30-364 30-382
Manufacturer: Cinch/ITT Cannon Cinch
Manufacturer Part No.: 008 0328-3/DAMC3H3PJK87 008 00334-4
30-425
PIN NUMBER SIGNAL
1 (A1) +12 VDC
2 (A2) —
30-364
3 (A3) Ground
30-382
DC Power Input Connector: 3-pin Kycon
Enclosure Mating Connector
GD Part No.: 30-482 30-332
Manufacturer: Kycon Kycon
Manufacturer Part No.: KPJ-3S KPP-3P
30-482
PIN NUMBER SIGNAL
1 +12 VDC
2 Return
3—
30-332
The Innovators of Flat Panel Technology
TM OEM Monitor Kit™User’s Manual
10Connections(continued)
VGA Input Connector: 15-pin High Density
Enclosure Mating Connector
GD Part No.: 30-238 30-239
Manufacturer: Amphenol (or equivalent) Amphenol (or equivalent)
Manufacturer Part No.: 17HD015SAA000 17HD015PAA000
30-238
PIN NUMBER SIGNAL
1 Red
2 Green
3 Blue
30-239
4—
5 Ground
6 Red Return
7 Green Return
8 Blue Return
9—
10 Ground
11 —
12 —
13 H Sync
14 V Sync
15 —
Serial/Touch Connector: 9-pin D-Sub.
Enclosure Mating Connector
GD Part No.: 30-045 30-026
Manufacturer: Amphenol Amphenol
Manufacturer Part No.: DE-9S DE-9P
30-045
PIN NUMBER SIGNAL
1 DCD
2RX
3TX
30-026
4 DTR
5 Ground
6 DSR
7 RTS
8 CTS
9RI
Ce manuel convient aux modèles suivants
30
Table des matières
Autres manuels GENERAL DIGITAL Moniteur
