Generac Power Systems Pro 6712 Manuel utilisateur

Operator’s Manual for Power Washer i

Power Washer

Operator’s Manual

MODEL:________________________

SERIAL:________________________

DATE PURCHASED:______________

1-888-922-8482

SAVE THIS MANUAL FOR FUTURE REFERENCE

000263

Table of Contents

Section 1 Introduction and Safety 1

Introduction ..................................... 1

Safety Rules .................................... 1

Safety Symbols and Meanings ........ 2

Section 2 General Information and

Setup .............................................. 3

Know Your Power Washer .............. 3

Emissions Information ..................... 3

Remove Contents from Carton ....... 4

Assembly ......................................... 4

Add Engine Oil ................................ 4

Check Pump Oil .............................. 5

Fuel ................................................. 5

Water Supply ................................... 5

Connect Water Supply .................... 6

Connect Lance and High-Pressure

Hose to Spray Gun .......................... 6

Spray Gun ....................................... 6

How to Use Nozzles ........................ 6

Section 3 Operation .......................8

Operation and Use Questions .........8

Before Starting Engine ....................8

Prepare Power Washer for Use .......8

Apply Detergent .............................10

Rinsing ...........................................10

Clean Detergent Siphoning Tube ..10

Automatic Cool Down System

(Thermal Relief) .............................11

Section 4 Maintenance and

Troubleshooting ..........................12

Maintenance ..................................12

Maintenance Schedule ..................12

Preventive Maintenance ................12

Engine Maintenance ......................14

Service Spark Plug ........................15

Storage ..........................................16

Troubleshooting .............................18

Notes .............................................19

(000393a)

WARNING

CANCER AND REPRODUCTIVE HARM

www.P65Warnings.ca.gov.

Introduction and Safety

Owner’s Manual for Power Washer 1

Section 1 Introduction and Safety

Introduction

Thank you for purchasing a Generac Power

Systems Inc. product. This unit has been

designed to provide high performance,

efficient operation, and years of use when

maintained properly.

If any section of the manual is not understood,

contact your nearest Independent Authorized

Service Dealer (IASD), or contact Generac

Customer Service at 1-888-GENERAC (1-

888-436-3722), or http://www.generac.com/

with any questions or concerns.

The owner is responsible for proper

maintenance and safe use of the equipment.

Before operating, servicing or storing this

power washer:

• Study all warnings in this manual and on

the product carefully.

• Become familiar with this manual and the

unit before use.

• Refer to the Assembly section of the

manual for instructions on final assembly

procedures. Follow the instructions

completely.

Save these instructions for future reference.

ALWAYS supply this manual to any individual

that will use this machine.

The information in this manual is accurate

based on products produced at the time of

publication. The manufacturer reserves the

right to make technical updates, corrections,

and product revisions at any time without

notice.

Safety Rules

The manufacturer cannot anticipate every

possible circumstance that might involve a

hazard. The warnings in this manual, and on

tags and decals affixed to the unit are, there-

fore, not all inclusive. If using a procedure,

work method or operating technique that the

manufacturer does not specifically recom-

mend, verify that it is safe for others. Also

make sure the procedure, work method or

operating technique utilized does not render

the equipment unsafe.

Throughout this publication, and on tags and

decals affixed to the generator, DANGER,

WARNING, CAUTION and NOTE blocks are

used to alert personnel to special instructions

about a particular operation that may be haz-

ardous if performed incorrectly or carelessly.

Observe them carefully. Their definitions are

as follows:

NOTE: Notes contain additional information

important to a procedure and will be found

within the regular text of this manual.

These safety warnings cannot eliminate the

hazards that they indicate. Common sense

and strict compliance with the special instruc-

tions while performing the action or service

are essential to preventing accidents.

(000100a)

WARNING

Consult Manual. Read and understand manual

completely before using product. Failure to

completely understand manual and product

could result in death or serious injury.

(000001)

DANGER

Indicates a hazardous situation which, if not avoided,

will result in death or serious injury.

(000002)

WARNING

Indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

(000003)

CAUTION

Indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

Introduction and Safety

2 Owner’s Manual for Power Washer

Safety Symbols and Meanings

Asphyxiation. Running engines produce

carbon monoxide, a colorless, odorless,

poisonous gas. Carbon monoxide, if not

avoided, will result in death or serious injury.

(000103)

DANGER

(000104)

DANGER

Electrocution. Water contact with a power

source, if not avoided, will result in death

or serious injury.

(000105)

DANGER

Explosion and Fire. Fuel and vapors are

extremely flammable and explosive. Add fuel

in a well ventilated area. Keep fire and spark

away. Failure to do so will result in death

or serious injury.

(000106b)

Fluid Injection. This machine produces

high-pressure fluid streams that can pierce

skin. Fluid injection could result in death or

serious injury.

WARNING

(000110)

WARNING

Risk of Fire. Hot surfaces could ignite

combustibles, resulting in fire. Fire could

result in death or serious injury.

(000101)

WARNING

Vision Loss. Eye goggles are required to be

worn when using this machine. Failure to wear

eye goggles could result in permanent

vision loss.

(000107)

WARNING

Hearing Loss. Hearing protection is

recommended when using this machine.

Failure to wear hearing protection could

result in permanant hearing loss.

(000108)

WARNING

Hot Surfaces. When operating machine, do not

touch hot surfaces. Keep machine away from

combustibles during use. Hot surfaces could

result in severe burns or fire.

(000109)

WARNING

Risk of Fire. Verify machine has properly

cooled before installing cover and storing

machine. Hot surfaces could result in fire.

(000111)

WARNING

Moving Parts. Keep clothing, hair, and

appendages away from moving parts. Failure

to do so could result in death or serious injury.

(000112)

WARNING

Risk of Falling. Use of machine creates wet

areas and trip hazards. Be aware of work area

conditions. A fall could result in death

or serious injury.

(000114)

WARNING

Risk of Falling. Do not use this machine or

any components on elevated surfaces.

Doing so can result in a fall, serious injury,

or death.

(000113)

WARNING

Recoil Hazard. Recoil could retract unexpectedly

if water pressure is not properly relieved from

pump, creating kickback. Kickback could result

in death or serious injury.

(000100a)

WARNING

Consult Manual. Read and understand manual

completely before using product. Failure to

completely understand manual and product

could result in death or serious injury.

(000115)

WARNING

Moving Parts. Do not wear jewelry when

starting or operating this product. Wearing

jewelry while starting or operating this product

could result in death or serious injury.

(000117c)

Personal injury. Risk of fluid injection.

Do not aim spray gun at people, animals,

electrical devices, or fragile items. Keep out

of reach of children. Failure to do so

could cause death or serious injury.

WARNING

Environmental Hazard. Always recycle batteries at an

official recycling center in accordance with all local

laws and regulations. Failure to do so could result in

environmental damage, death or serious injury.

(000228)

(000244)

WARNING

Personal Injury / Equipment Damage. Place wand in

holster and verify that handle is locked into place

before moving. Failure to do so could result in death,

serious injury, or equipment damage.

Owner’s Manual for Power Washer 3

Section 2 General Information and Setup

Figure 2-1.Features and Controls

Table 2-1. Power Washer Components Know Your Power Washer

Read this manual thoroughly before

assembling and operating this unit. Save this

manual for future and immediate reference.

Replacement owner’s manuals are available

at www.generac.com.

Emissions Information

The U.S. Environmental Protection Agency

(and California Air Resource Board for

equipment certified to CA standards) requires

that this engine comply with exhaust and

evaporative emission standards. Locate the

emissions compliance decal on the engine to

determine what standards the engine meets,

and to determine which emissions warranty

applies. The engine is certified to meet the

applicable emission standards on gasoline. It

is important to follow the maintenance

specifications in the Maintenance section to

verify that the engine complies with the

applicable emission standards for the duration

of the product’s life. This engine utilizes lean

carburetion settings and other systems to

reduce emissions. Tampering with or altering

the emission control system may increase

emissions and may be a violation of Federal

or California Law. Acts that constitute

tampering include but are not limited to:

• Removal or alteration of any part of the

intake, fuel, or exhaust systems.

• Altering or defeating the governor linkage

or speed-adjusting mechanism to cause

the engine to operate outside its design

parameters.

000264

A Spray Gun

B Lance with Quick Connect

C High-Pressure Hose

D Recoil Starter

E Oil Fill

F Air Filter

G High-Pressure Pump

H Thermal Relief Valve

I Engine On/Off Switch

J Unloader Valve

K High-pressure Outlet

L Water Inlet

M Fuel Tank

N Fuel On/Off Valve

O Choke

PBelt Guard

R Nozzles

S Adjustable Side Handle

T Oil Drain Plug

U Serial Number Location.

*Identification Label (not shown) – located

on engine blower housing

*Detergent Siphoning Tube/Filter (not

shown)

(000100a)

WARNING

Consult Manual. Read and understand manual

completely before using product. Failure to

completely understand manual and product

could result in death or serious injury.

4 Owner’s Manual for Power Washer

Have the engine inspected and repaired by a

servicing dealer if these symptoms develop:

• Hard starting or stalling after starting

• Rough idle

• Misfiring or backfiring under load

• Afterburning (backfiring)

• Black exhaust smoke or high fuel

consumption

NOTE: Maintenance, replacement, or repair of

emissions control devices and systems may

be performed by a small engine repair

establishment or individual. To be covered by

warranty, all emissions control service work

must be performed by a factory authorized

dealer. See emissions warranty for further

details.

Remove Contents from Carton

1. Open carton completely by cutting each

corner from top to bottom.

2. Remove and verify carton contents prior to

assembly. Carton contents should contain

one each of the following:

• Main Unit

• High-pressure Hose

• Siphon Hose & Filter

• Spray Gun

• Lance with Quick Connect Fitting

• Oil Bottle

• Parts Bag (includes):

– Owner’s Manual

– Owner’s Registration Card

– Bag of Colored Nozzles

3. Call Generac Customer Service 1-888-

436-3722 with the unit model and serial

number for any missing carton contents.

4. Record model, serial number, and date of

purchase on front cover of this manual.

Assembly

Call Generac Customer Service at 1-888-436-

3722 for any assembly issues or concerns.

Please have model and serial number

available.

1. Insert color-coded nozzles in spaces

provided (Figure 2-2).

Figure 2-2.Insert Nozzles (number may

vary)

2. Place spray gun and nozzle extension into

spray gun holder.

3. See Figure 2-3 Attach siphon tube.

Figure 2-3.Siphon Tube Location

Add Engine Oil

1. Place power washer on a flat, level

surface.

2. Clean area around oil fill and remove

orange oil fill cap/dipstick (Figure 2-4).

Figure 2-4.Fill Engine Oil

3. Using oil funnel (optional), slowly pour oil

into oil fill opening. See Engine Oil

Recommendations.

NOTE: On some units there is more than one

oil fill location. In these instances it is only

necessary to use one of the oil fill points.

4. Check periodically until the oil level is

between "L" and "H" on the dipstick

(Figure 2-5). DO NOT OVERFILL.

(000100a)

WARNING

Consult Manual. Read and understand manual

completely before using product. Failure to

completely understand manual and product

could result in death or serious injury.

000265

000266

000115

Owner’s Manual for Power Washer 5

NOTE: Any attempt to crank or start the

engine before it has been properly serviced

with the recommend oil may result in engine

failure.

5. Replace oil fill cap/dipstick and fully

tighten.

Figure 2-5.Safe Operating Range

Check Pump Oil

1. Place power washer on a flat, level

surface.

2. Clean area around oil fill and remove

vented cap/dipstick (Figure 2-1).

Figure 2-6.Check Pump Oil

3. Check to confirm oil level is within the

markings on the dipstick (Figure 2-5). If oil

is required, see Maintenance section. DO

NOT OVERFILL.

4. See Preventive Maintenance for additional

information.

5. Install oil dipstick until finger tight.

6. Clean up any spilled oil.

Figure 2-7.Pump Oil Dipstick

Fuel

Fuel requirements are as follows:

• Clean, fresh, unleaded gasoline.

• Minimum rating of 87 octane/87 AKI (91

RON).

• Up to 10% ethanol (gasohol) is acceptable.

• DO NOT use E85.

• DO NOT use a gas oil mix.

• DO NOT modify engine to run on alternate

fuels.Stabilize fuel prior to storage.

1. Verify unit is OFF and cooled for a

minimum of two minutes prior to fueling.

2. Place unit on level ground in a well

ventilated area.

3. Clean area around fuel cap and remove

cap slowly.

4. Slowly add recommended fuel. Do not

overfill.

Figure 2-8.Add Recommended Fuel

5. Install fuel cap.

NOTE: Allow spilled fuel to evaporate before

starting unit.

Water Supply

NOTE: DO NOT run unit without sufficient

water supply. Failure to follow water supply

requirements will void unit warranty.

Water supply must meet the following require-

ments:

• DO NOT siphon standing water for the

water supply.

• Water temperature must be less than 100

°F (38 ºC).

• Water supply hose length must not exceed

50 ft (15.2 m).

• Water must be greater than 3.8 gallons per

minute (17.3 liters per minute) and no less

than 30 psi (206.8 kPa).

• DO NOT use a one-way valve, vacuum

breaker, or check valve in any part of the

water supply.

000116

000267

000268

(000105)

DANGER

Explosion and Fire. Fuel and vapors are

extremely flammable and explosive. Add fuel

in a well ventilated area. Keep fire and spark

away. Failure to do so will result in death

or serious injury.

000117

6 Owner’s Manual for Power Washer

Connect Water Supply

1. Remove and discard shipping cap from

the pump water inlet.

2. Run water supply for 30 seconds prior to

connection to eliminate debris.

3. See Figure 2-9. Inspect inlet screen (A) for

debris. Clean screen or replace as

necessary. DO NOT run power washer if

inlet screen is damaged or missing.

Figure 2-9.Connect Water Supply

4. Connect water supply hose to pump water

inlet (A) and hand-tighten.

5. Connect high-pressure hose to pump (B).

Connect Lance and High-

Pressure Hose to Spray Gun

1. See Figure 2-10. Connect lance to spray

gun and hand-tighten.

Figure 2-10.Connect Lance

2. See Figure 2-11. Connect high-pressure

hose to base of spray gun.

Figure 2-11.Connect High-Pressure Hose

to Spray Gun

Spray Gun

Become familiar with spray gun trigger and

locking system prior to use.

See Figure 2-12. With unit OFF, hold spray

gun and squeeze trigger to learn how trigger

mechanism and locking system can be

activated and deactivated.

Figure 2-12.Spray Gun (Typical)

3. Turn ON the water, squeeze the trigger to

purge the pump system of air.

4. Verify spray gun is OFF with lock engaged

before starting power washer.

How to Use Nozzles

1. See nozzle selection guide and select

correct nozzle for task.

2. See Figure 2-13. Pull back quick–connect

collar and install nozzle.

Figure 2-13.Insert Nozzle

3. Release quick-connect collar to secure

nozzle.

4. Verify nozzle is locked in place.

000270

000120

000269

000123

000125

Owner’s Manual for Power Washer 7

Nozzle Selection Guide

Blast

Pressure

Nozzle

(Red)

Strip

Pressure

Nozzle

(Yellow)

Clean

Pressure

Nozzle

(Green)

Wash

Pressure

Nozzle

(White)

Detergent

Nozzle

(Black)

000245

MAXIMUM - Higher pressure and lower flow for stubborn or hard to reach

surface such as second story surfaces, paint removal, oil stains, rust removal

or other stubborn substances (tar, gum, grease, wax, etc.).

MEDIUM - Higher pressure and medium flow for removing stains on hard

porous surfaces such as concrete driveways, garage floors and brick patios.

GENERAL - Medium pressure and medium flow for most all purpose cleaning

such as home siding, brick patios, wood decks, driveways and

sidewalks, garage floors, etc.

DELICATE - Lower pressure and higher flow for gentle cleaning of cars/trucks,

boats, RV’s, patio furniture, lawn equipment, etc.

DETERGENT ONLY (BLACK), Only use power washer safe detergents/soaps

to help break down stubborn dirt and grime on a variety of surfaces.

Operation

8 Owner’s Manual for Power Washer

Section 3 Operation

Operation and Use Questions

Call Generac customer service at 1-888-436-

3722 with questions or concerns about unit

operation and maintenance.

Before Starting Engine

1. Verify engine oil level is correct.

2. Verify fresh fuel level is correct.

3. Verify all fittings and couplers are properly

secured.

4. Verify sufficient water supply is properly

connected.

5. Verify unit is secure on level ground, with

proper clearance and is in a well ventilated

area.

Prepare Power Washer for Use

1. Place unit on level ground, within the

specified clearance required.

2. Connect appropriate water supply.

Power Washer Placement for Use

It is a violation of California Public Resource

Code, Section 4442, to use or operate the

engine on any forest-covered, brush-covered,

or grass-covered land unless the exhaust

system is equipped with a spark arrester, as

defined in Section 4442, maintained in

effective working order. Other states or federal

jurisdictions may have similar laws.

Only operate power washer outdoors in a well

ventilated area. Never operate power washer

indoors, or in a confined space. Be aware of

building openings and ventilation systems

where exhaust may enter during use.

• Verify power washer is placed on level

ground to avoid tipping during operation.

• Only use the unit outdoors. Verify exhaust

gas does not enter a confined area through

windows, doors, ventilation intakes.

•See Figure 3-1 Keep at least 5 ft (1.5 m) of

clearance on all sides of power washer

including overhead from dwellings and

combustibles, when in use.

Figure 3-1.Five Feet of Minimum Clearance

Power Washer Start-Up

NOTE: DO NOT run power washer without a

sufficient water supply turned ON. Damage to

equipment resulting from failure to follow this

instruction will void warranty.

1. Connect a sufficient water supply.

2. See Figure 3-2. Move fuel valve (B) to ON.

3. Move choke lever (A) to CLOSE.

Figure 3-2.Fuel Valve and Choke

NOTE: For warm engine, verify choke lever is

in OPEN position.

4. See Figure 3-3. Turn engine switch ON.

Figure 3-3.Engine Switch

Asphyxiation. Running engines produce

carbon monoxide, a colorless, odorless,

poisonous gas. Carbon monoxide, if not

avoided, will result in death or serious injury.

(000103)

DANGER

(000110)

WARNING

Risk of Fire. Hot surfaces could ignite

combustibles, resulting in fire. Fire could

result in death or serious injury.

(000108)

WARNING

Hot Surfaces. When operating machine, do not

touch hot surfaces. Keep machine away from

combustibles during use. Hot surfaces could

result in severe burns or fire.

000271

000127

OFF

000128

Table des matières

Langues :

Autres manuels Generac Power Systems Nettoyeur haute pression

Generac Power Systems

Generac Power Systems 1537-0 Manuel utilisateur

Generac Power Systems

Generac Power Systems 1750PSI Manuel utilisateur

Generac Power Systems

Generac Power Systems 1195-0 Manuel utilisateur

Generac Power Systems

Generac Power Systems 1418-1 Manuel utilisateur

Generac Power Systems

Generac Power Systems 2000PSI Manuel utilisateur

Generac Power Systems

Generac Power Systems 1455-0 Manuel utilisateur

Generac Power Systems

Generac Power Systems OneWASH Manuel utilisateur

Generac Power Systems

Generac Power Systems 5993-2 Manuel utilisateur

Generac Power Systems

Generac Power Systems 1046-0 Manuel utilisateur

Generac Power Systems

Generac Power Systems 1292-2 Manuel utilisateur

Generac Power Systems

Generac Power Systems OneWASH Manuel utilisateur

Generac Power Systems

Generac Power Systems OneWASH Manuel utilisateur

Generac Power Systems

Generac Power Systems 2500PSI Manuel utilisateur

Generac Power Systems

Generac Power Systems 1300PSI Manuel utilisateur

Generac Power Systems

Generac Power Systems 1439-0 Manuel utilisateur

Generac Power Systems

Generac Power Systems 1042-2 Manuel utilisateur

Generac Power Systems

Generac Power Systems 1700PSI Manuel utilisateur

Generac Power Systems

Generac Power Systems 1420-0 Manuel utilisateur

Generac Power Systems

Generac Power Systems 1044-1 Manuel utilisateur

Generac Power Systems

Generac Power Systems The Reliable Ones Manuel utilisateur

Generac Power Systems

Generac Power Systems 3000PSI Manuel utilisateur

Generac Power Systems

Generac Power Systems Power Washer Manuel utilisateur

Generac Power Systems

Generac Power Systems 1600PSI Manuel utilisateur

Generac Power Systems

Generac Power Systems Power Washer Manuel utilisateur

Manuels Nettoyeur haute pression populaires d'autres marques

Shark

Shark RG-232637 Manuel utilisateur

Shakti Technology

Shakti Technology S3 Manuel utilisateur

Kärcher

Kärcher K 4 Pure Manuel utilisateur

Porter-Cable

Porter-Cable D25806-025-2 Manuel utilisateur

REM POWER

REM POWER HDEm 662 Manuel utilisateur

Landa

Landa HS-3000 Manuel utilisateur

Craftsman

Craftsman 580.752270 Manuel utilisateur

HIKOKI

HIKOKI AW 100 Manuel utilisateur

Delco

Delco DC 1302 Manuel utilisateur

Kärcher

Kärcher K 3 Full Control Manuel utilisateur

BIEMMEDUE

BIEMMEDUE 120/10 - 170/13 Manuel utilisateur

ARKSEN

ARKSEN 014-HG-14141-HR Manuel utilisateur

Black & Decker

Black & Decker PW1700SPX Manuel utilisateur

Kärcher

Kärcher 595 - SPARE Mode d’emploi

Kranzle

Kranzle B 10 200 Manuel utilisateur

Stihl

Stihl RE 90 Manuel utilisateur

Husky

Husky HU80911 Manuel utilisateur

PowR-Quip

PowR-Quip PQ-2600 Manuel utilisateur