Genelec 1032A Manuel utilisateur
ACCESSORIES
May 2008
FOR GENELEC LOUDSPEAKERS
Table stands 3
Floor stands 4-5
Stand plates 6
Ceiling mounts 7
Wall mounts 8-9
Flush mount kits 10
Other 11
Cable 12
Carrying accessories 12
Slotwall system 13
Accessories table 14
Monitor line drawings 15
contents
1036A
1035B
1039A
1034B
1034BC
1038B
1038BC 7050B
7060B / 7260A
SE7261A
7070A / 7270A
7071A / 7271A
1037C
1032A
8020A
8030A / 8130A
8040A / 8240A
8050A / 8250A
6010A
3
www.genelec.com
table stands
8000-406 with stand plate.
Short table stand
Short table stand providing a raised position for near-eld monitors.
Suitable for 8020A, 8030A and 8040A. Heavy black cast iron base
with anti-vibration rubber ring, diameter 17 mm. Mounting 3/8” thread
on the tube top. Preferably used together with stand plates for better
positioning. The 8020A and 8030A models have an integrated 3/8”
thread for possible direct xing without stand plate. The 8040A model
must be installed with a stand plate.
8000-406 Table stand (K&M 23310-370-55)
8000-406
80 mm
104 mm
Speaker tted on
8000-425B with
stand plate.
Associated products
8030-408 8020-4088040-408
Adjustable height table stand
Adjustable height table stand for 8020A and 8030A with a base plate
that can be attached to a table or at surface. Preferably used with
stand plate and IsoPod for better monitor orientation (see picture
below). The telescopic tube length (301 to 527 mm) is designed for
optimum monitor positioning behind or above computer screens.
Screws and xing nuts for a 40 mm thick table are included.
8000-425B Fixed table stand (K&M 23360-300-55)
8000-425B, Adjustable
height table stand
4www.genelec.com
FlooR stands
8000-409B
8000-403
Design oor stand
After a long development journey together with K&M, we can nally offer the
“Genelec designed oor stand” for the 8000 Series loudspeakers. Harri Kosk-
inen, industrial designer and partner in the design of the 8000 Series loud-
speaker made the rst drawings several years ago.
This very stable and elegant steel stand has a 420 x 420 mm cast base
with an oversized rod combination. Gradual height adjustment is made by a
superior positioning and clamping knob. Quick, uncomplicated mounting of
the monitor is accomplished using the suspension device. This oor stand is
mainly designed for the 8040A/8240A and 8050A/8250A products. Weight:
13.4 kg, Height: variable between 1100/1700 mm.
8000-400 Floor stand “Genelec design” (K&M 26785-000-56)
Floor stand
Stable steel stand with a broad round cast iron base. Base diameter is 450
mm. Adjustable in height using clamping screw and safety pin. Mounting 3/8”
thread for any Genelec stand plates, from 8020A to 8050A model.
Load capacity: 35 kg. Weight: 10.6 kg. Height: 950 to 1430 mm.
Packing: double cardboard packing; iron base in one and stand in the second.
Suitable for; 8020A, 8030A, 8130A, 8040A, 8240A, 8050A and 8250A.
8000-409B Floor stand (K&M 26741-029-55)
Floor stand
Floor stand for 8020A and 8030A, preferably used together with stand plates.
Cast iron base with anti-vibration rubber ring. Weight: 5.4 kg. Height: 870 to
1565 mm. Base diameter: 250 mm. Packing: single cardboard box. Suitable
for; 8020A, 8030A and 8130A.
8000-403 Floor stand (K&M 26000-300-55)
8000-409B
8000-400
Associated products
Associated products
8030-408 8020-4088040-4088050-408
5
www.genelec.com
Floor stand for 1037 monitor
Adjustable in height (35 cm) and can be tilted +/- 15º. The speaker is xed on
the stand without damage to the enclosure. Two sidebars lock the speaker
to the stand with M10 screws into threads on the sides of the enclosure. The
stand base has ve wheels and two of them can be locked to hold the stand
still. Height (to plate): 615-950 mm. Weight: 17 kg
1037-415B Floor stand for 1037 (K&M 45100-000-55)
Floor stand for 1038 monitor
Adjustable in height (35 cm) and can be tilted +/- 15º. The speaker is xed on
the stand without damage to the enclosure. Two sidebars lock the speaker
to the stand with M10 screws into threads on the sides of the enclosure. The
stand base has ve wheels and two of them can be locked to hold the stand
still. Height (to plate): 620-960 mm. Weight: 17,3 kg
1038-415B Floor stand for 1038 (K&M 45110-000-55)
1037-415B
FlooR stands
6www.genelec.com
Stand plates 8000 series
Genelec stand plates are designed for use together with the IsoPod that
comes with all 8000 series monitors. The IsoPod allows you to tilt the monitor
for optimal alignment. Simply mount the stand plate onto the 3/8” thread on
the tube and ensure tight screw connection. Place the IsoPod over the four
pins of the stand plate.
8010-408 Stand plate for 6010 Iso-Pod (K&M 19621-329-55)
8020-408 Stand plate for 8020 Iso-Pod (K&M 19622-329-55)
8030-408 Stand plate for 8030 Iso-Pod (K&M 19623-329-55)
8040-408 Stand plate for 8040 Iso-Pod (K&M 19624-329-55)
8050-408 Stand plate for 8050 Iso-Pod (K&M 19625-329-55)
Stand plate for 1032A
Stand plate for 1032A and S30D monitors. To be mounted on a stable oor
stand, example 8000-409B (K&M 26741-029-55). The stand plate has a 3/8”
thread insert in its centre for further stand assembly. The plate is tiltable 15°
and a rear press t bar keeps the enclosure securely xed onto the plate.
1032-450B Stand plate for 1032A (K&M 24455-000-55)
1032-450B.
1032A stand plate mounted
on oor stand.
stand Plates
Stand plate and
IsoPod assembly.
8000-409B
Associated
product
8030-408 8020-4088040-4088050-408 8010-408
7
www.genelec.com
Short ceiling mount
For all 8000 series models. Available in black or white.
8000-435B Black (K&M 24485-000-55)
8000-435W White (K&M 24485-000-57)
ceIlInG mounts
Adjustable height ceiling mount
For all 8000 series models. Adjustable length from
905 to 1505 mm. T-adapter included for 8020A
and 8030A models.
8000-415B (K&M 24490-000-55)
Cluster Mount
Answering the market needs for various mounting
options, we now offer a cluster mounting bracket for
three 8020A or 8030A/8130A models. The cluster
mount has various tilting angle possibilities and can
be hung on three wires or placed on a pole. Available
in black or white.
8000-440B Cluster Mount Black
8000-440W Cluster Mount White
8000-435W
8000-435B
8000-415B
1 2 3 4 5
Tool 10 mm
8www.genelec.com
Fixed wall mount
Wall mount for 8020A and 8030A/8130A. Available in black and white.
Included with each 8020A.
8000-410B Black
8000-410W White
wall mounts 8000 seRIes
Till 6010, bif. fäste. J
skickar bild+streckt.
Wall & ceiling mount
Combined wall and ceiling mount for 6010A. Available in black, silver
and white. Packed in pairs.
8010-202B Black (Sanus WMS3B)
8010-202S Silver (Sanus WMS3S)
8010-202W White (Sanus WMS3W)
Fixed wall mount
Wall mount bracket for 6010A. Tiltable 30°. Available in black and white.
Included with each 6010A.
6010-410B Black
6010-410W White
Adjustable wall mount with T-plate
Wall mount with T-plate for 8020A and 8030A/8130A. Available in
black and white.
8000-412B Black (K&M 24179-000-55)
8000-412W White (K&M 24179-000-57)
Adjustable wall mount
Wall mounting bracket for 8040A/8240A. Available in black and white.
8000-401B Black (K&M 24180-000-55)
8000-401W White (K&M 24180-000-57)
9
www.genelec.com
wall mounts
Wall mount 1032A
Wall mount for 1032A (also S30D). Tiltable
15° and adjustable for correct monitor posi-
tioning. Holds the enclosure securely with a
rear press t bar.
1032-460B Black (K&M 24453-000-55)
1032-460B Wall Mount
Wall mount for 1037 monitor
Can be horizontally turned +/- 35º and tilted
0-35º in xed 5º steps. The speaker is xed
on the wall mount without damages to the
enclosure. Two sidebars lock the speaker to
the stand with M10 screws into threads on
the sides of the enclosure. Weight: 11,4 kg
1037-414B Black (K&M 24457-000-55)
Adjustable wall mount
Wall mounting bracket for 8000 series. Available in black and white.
Security wire available, see page 11.
8000-402B Black (K&M 24475-000-55)
8000-402W White (K&M 24475-000-57)
10 www.genelec.com
Flush mount kit for one
8040A/8240A or 8050A/8250A
Genelec Flush mount kits are designed for mounting Genelec
8040A/8240A or 8050A/8250A monitors into a sturdy wall structure.
They may not be used for any other purpose.
8040-450B Flush Mount Kit for 8040A and 8240A
8050-450B Flush Mount Kit for 8050A and 8250A
Half 19” rack mount kit for 8020A
Two pieces of Genelec half rack mount kits are necessary to mount a
pair of 8020A in a 19” wide equipment rack (see picture).
8020-490 Half 19” rack mount kit
FlusH mount KIts
8040A Flush Mount Kit
dimensions
8050A Flush Mount Kit
dimensions
RacK mount KIt
8030A / 8130A
Flush mount drawing for 8030A.
Autres manuels pour 1032A
7
Ce manuel convient aux modèles suivants
24
Table des matières
Autres manuels Genelec Intervenants
Genelec
Genelec AutoCal 8130A Manuel utilisateur
Genelec
Genelec 1029 Manuel utilisateur
Genelec
Genelec 8010A Manuel utilisateur
Genelec
Genelec 1036A Manuel utilisateur
Genelec
Genelec 1038BC Manuel utilisateur
Genelec
Genelec 1032A Manuel utilisateur
Genelec
Genelec 8040A Manuel utilisateur
Genelec
Genelec 1038AC Manuel utilisateur
Genelec
Genelec DSP 8260A Guide d'installation
Genelec
Genelec G Two Manuel utilisateur
Genelec
Genelec 1034BC Manuel utilisateur
Genelec
Genelec 1035B Manuel utilisateur
Genelec
Genelec 4010A Manuel utilisateur
Genelec
Genelec 1029A Manuel utilisateur
Genelec
Genelec S30C Manuel utilisateur
Genelec
Genelec 1032B Manuel utilisateur
Genelec
Genelec 1234APM Manuel utilisateur
Genelec
Genelec AOW312 Guide de l'utilisateur
Genelec
Genelec M040 Manuel utilisateur
Genelec
Genelec 1238AC Manuel utilisateur
Manuels Intervenants populaires d'autres marques
Bowers & Wilkins
Bowers & Wilkins 4 Manuel utilisateur
Sonance
Sonance SONOS OUTDOOR Series Manuel utilisateur
Electro-Voice
Electro-Voice EVID FM4.2 Manuel utilisateur
Pioneer
Pioneer XW-HTD630 Manuel utilisateur
Onn
Onn BWA16AA002 Manuel utilisateur
HP
HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur