Gefen EXT-HDMI-242 Manuel utilisateur
2x2 HDMI
Switcher
USER MANUAL
www.gefen.com
Technical Support:
Telephone (818) 772-9100
(800) 545-6900
Fax (818) 772-9120
Technical Support Hours:
8:00 AM to 5:00 PM Monday through Friday.
Write To:
Gefen Inc.
C/O Customer Service
20600 Nordhoff St.
Chatsworth, CA 91311
www.gefen.com
Notice
Gefen Inc. reserves the right to make changes in the hardware, packaging and any
accompanying documentation without prior written notice.
2x2 HDMI Switcher is a trademark of Gefen Inc.
HDMI is a trademark of hdmi.org
© 2007 Gefen Inc., All Rights Reserved
ASKING FOR ASSISTANCE
TABLE OF CONTENTS
Introduction
Features
Panel Descriptions
Connecting and Operating the 2x2 HDMI Switcher
RMT2-IR Installation
IR Code Conflicts
Dip Switch Guidelines
RS-232 Interface
Specifications
Warranty
1
2
3
4
5
6
7
8
9
10
Congratulations on your purchase of the ex•tend•it 2x2 HDMI Switcher. Your complete
satisfaction is very important to us.
Gefen’s line of HDTV switches, extenders, and splitters are designed to make yourA/V
equipment use more comfortable, more productive and less expensive.
The 2x2 HDMI Switcher allows access to two HDTV devices, using two HDTV displays.
Both output displays will have mirrored images. Also included is a TOSLINK output that
will output the digital audio signal in audio form.
The ex•tend•it line offers solutions for Home Theater, AV installation, noise, space and
security concerns, data center, information distribution, conference room presentation,
school and corporate training environments.
Our Commitment
Gefen will always offer the finest quality product at the best possible price. Included in
that price is a lifetime support from a team of outstanding engineers.
The ex•tend•it 2x2 HDMI Switcher allows two HDTV HDMI devices to be switched easily
in to two HDTV HDMI compatible monitors or projectors. Simply connect your HDTV
displays to the Switcher’s display outputs. The 2x2 HDMI Switcher can also be placed
at the end of a long HDMI cable to regenerate the HDMI signal.
INTRODUCTION
1
FEATURES
Features
• Switches easily between any two HDMI sources
• Maintains 480p, 720p, 720i, and 1080i, 1080p resolutions
• Maintains highest HDMI single link video resolution
• Maintains highest HDMI digital audio signal
• Includes TOSlink output for easy hookup to digital audio systems
• Supports HDCP compliant devices
• Fully HDMI 1.2 compliant
• HDMI or DVI to HDMI cables are used to connect the inputs and switcher output
• Inputs can be switched with the IR remote control
• RS-232 Controllable
• Installs in seconds
Includes:
(1) 2x2 HDMI Switcher
(2) 6’ HDMI cables (M-M)
(1) 5VDC Power Supply
(1) RMT2-IR
2
PANEL DESCRIPTIONS
Connects to
5VDC power
supply
IR eye
Indicates if input 1
or 2 is selected
3
RS232
Controller
Port
HDMI In 1 HDMI Out 1HDMI In 2
IR
Extender
port
HDMI Out 2
TOSLINK
Optical Out
CONNECTING AND OPERATING THE 2x2 HDMI SWITCHER
How to Connect the 2x2 HDMI Switcher to your devices
1 Connect the supplied cables from the HDTV sources into the 2x2 HDMI Switcher inputs.
2Connect the cable from your display (monitor or projector) into the HDMI outs of the
2x2 HDMI Switcher.
3 Connect any Digital Audio System into the OPTICAL out of the 2x2 HDMI Switcher
3 Plug the 5VDC power supply into the 2x2 HD Switcher.
How to enable the TOSlink on the 2x2 HDMI Switcher
The TOSlink audio is only enabled if you are using an HDMI source and an HDMI
display, otherwise the source goes into DVI mode by reading the DVI display EDID. If
you are using a DVI display you will have to open the switcher box to access the dip
switches and flip dip switch #2 (refer to page 6) to enable the TOSlink audio out. If you
are using both an HDMI and DVI display, make sure you have the HDMI display on
output 1 in order to enable the TOSlink audio out.
How to Control the 2x2 HDMI Switcher
Use the RMT2-IR remote control to toggle between sources.
4
5
RMT2-IR INSTALLATION
1. Remove battery cover from the back of the RMT2-IR remote.
2. Verify that dip switches 1 & 2 are in the down (OFF) position.
3. Insert the battery, hold the battery so that you can see the positive side facing up. The
side that is not marked must be facing down.
4. Test the RMT2-IR remote by pressing ONLY one button at a time. The indicator light
on the remote will flash once each time you press a button. WARNING: Do not press
multiple buttons simultaneously and do NOT press buttons rapidly. These actions will
cause the remote to reset and steps 1-4 will have to be repeated.
Note: The RMT2-IR ships with two batteries. One battery is required for operation, the
second battery is complimentary.
IR CODE CONFLICTS
How to Resolve IR Code Conflicts
There are matching pairs of dip switches underneath the Switcher unit and under the
remote battery cover. Switch 1 & 2 on the Remote and Switch 3 & 4 underneath the unit
are the matching switches. These switches need to be matched for the remote to
communicate with the switcher. There are 4 possible sets of IR codes and at least one of
these sets should be able to resolve any IR conflicts with other home theater devices.
12
Remote Channel 1:
12
Remote Channel 2:
12
Remote Channel 3:
12
Remote Channel 4:
Remote
6
Table des matières
Autres manuels Gefen Commutateur matriciel
Gefen
Gefen EXT-DVI-16416 Manuel utilisateur
Gefen
Gefen DVI-444DL Manuel utilisateur
Gefen
Gefen HDTV-444 Manuel utilisateur
Gefen
Gefen EXT-COMPAUD-44424 Manuel utilisateur
Gefen
Gefen GEF-HDFST-MOD-32432-HD Manuel utilisateur
Gefen
Gefen Digital Audio Switcher Manuel utilisateur
Gefen
Gefen EXT-HDMI1.3-444 Manuel utilisateur
Gefen
Gefen EXT-DVI-444DL Manuel utilisateur
Gefen
Gefen ToolBox GTB-MHDMI1.3-444 Manuel utilisateur
Gefen
Gefen GEF-HDFST-MOD-16416-HDELR Manuel utilisateur
Gefen
Gefen GEF-DVI-848DL-PB Manuel utilisateur
Gefen
Gefen EXT-DVI-16416 Manuel utilisateur
Gefen
Gefen 4x4 HDMI Manuel utilisateur
Gefen
Gefen EXT-HDMI1.3-444 Manuel utilisateur
Gefen
Gefen GEF-DVI-32432 Manuel utilisateur
Gefen
Gefen EXT-HDMI1.3-848CP Manuel utilisateur
Gefen
Gefen COMPAUD-44424 Manuel utilisateur
Gefen
Gefen GEF-DVI-16416-PB Manuel utilisateur
Gefen
Gefen GEF-DVI-848DL-PB Manuel utilisateur
Gefen
Gefen EXT-HDMI-844 Manuel utilisateur
