Gefen EXT-2DVIKVM-ELR Manuel utilisateur

www.gefen.com

2x DVIKVM

Extender

EXT-2DVIKVM-ELR

User Manual

ASKING FOR ASSISTANCE

Rev A2

Technical Support:

Telephone (818) 772-9100

(800) 545-6900

Fax (818) 772-9120

Technical Support Hours:

8:00 AM to 5:00 PM Monday thru Friday.

Write To:

Gefen LLC

c/o Customer Service

20600 Nordhoff St

Chatsworth, CA 91311

www.gefen.com

[email protected]

Notice

Gefen LLC reserves the right to make changes in the hardware, packaging, and

any accompanying documentation without prior written notice.

2x DVIKVM Extender is a trademark of Gefen LLC

All trademarks are the property of their respective owners.

CONTENTS

1 Introduction

2 Operation Notes

3 Features

4 Sender Unit Layout

5 Sender Unit Descriptions

6 Receiver Unit Layout

7 Receiver Unit Descriptions

8 Connecting the 2x DVIKVM Extender

8 Wiring Diagram

9 DIPSwitchConguration

11 Network Cable Wiring Diagram

12 Rack Tray Installation

13 Troubleshooting

14 Specications

15 Warranty

Congratulations on your purchase of the Gefen 2x DVIKVM Extender.

Your complete satisfaction is very important to us.

Gefen

Gefen delivers innovative, progressive computer and electronics add-on solutions

that harness integration, extension, distribution and conversion technologies.

Gefen’s reliable, plug-and-play products supplement cross-platform computer

systems, professional audio/video environments and HDTV systems of all sizes

with hard-working solutions that are easy to install and simple to operate.

The Gefen 2x DVIKVM Extender

The 2x DVIKVM Extra Long Range Extender Over Two CAT5 extends any two

DVI sources and USB to two monitors, touch screen displays, or digital signage

applications up to 330 feet (100 meters), using two CAT-5e cables. USB 2.0 data

rates up to 100 Mbps are supported in addition to backward-compatibility with

USB 1.1. The Receiver unit allows the connections of up to three USB devices,

providing access to printers, scanners, cameras, external storage media, digital

signage, and automated control systems. This product uses Gefen ELR

technology, allowing DVI and USB signals to travel along the same CAT-5e

cables, reducing cabling costs and providing easier installation.

How It Works

Place the 2x DVIKVM Extender Sender unit next to the DVI sources. Use the

included DVI cables to connect the DVI sources to the Sender unit. Use the

supplied USB cable to connect the USB host (source) device to the USB port on

the Sender unit. Connect the Receiver unit to the displays with DVI cables.

Connect the USB devices to the Receiver unit. Use two CAT-5e cables, each up

to 330 feet (100 meters), to connect the Sender to the Receiver unit. Connect the

included locking power supplies to the Sender and Receiver units and plug both

power cords into available electrical outlets.

INTRODUCTION

OPERATION NOTES

PLEASE READ THESE NOTES BEFORE INSTALLING OR

OPERATING THE 2X DVIKVM EXTENDER

• Cat-5 or Cat-6 cables should not exceed 330 feet (100 meters).

• Shielded (STP) Cat-5 or Cat-6 is recommended. However, un-shielded

(UTP) Cat-5 or Cat-6 is acceptable.

NOTE: The shielded cable has an advantage by providing immunity to

Electromagnetic Interference (EMI), cell phones and A/C motors.

• The Gefen 2x DVIKVM Extender features the ability to generate compatible

EDID and Hot Plug signals when working with different brands of source

devices and monitors.

• This product supports HDCP with HDMI sources.

• Dual-link resolutions are not supported.

FEATURES

Features

• Extends two DVI sources and USB up to 330 feet (100 meters)

• Supports resolutions up to 1920 x 1200

• Supports 100 Mbps using USB 2.0

• Backward-compatible with USB 1.1 devices

• Field-upgradeable via mini-USB service port

• Supports DDWG standard for DVI-compliant monitors

• Supports any Operating System (OS)

• EDID management for rapid integration of source and display devices

• ELR and HDBaseT® technologies allow extension up to

330 feet (100 meters)

• Rack-mountable

Applications

• Ideal for digital signage applications

• Extension of KVM workstations

Package Includes

(1) 2x DVIKVM Extender - Sender unit

(1) 2x DVIKVM Extender - Receiver unit

(2) 6 ft. DVI cables

(1) 6 ft. USB cable

(2) 5V DC Locking Power Supplies

(2) AC Power Cords

(1) Set of Rack Ears

(1) Quick-Start Guide

SENDER UNIT LAYOUT

Front

Back

1 3 6

814

9 10 12 13

1 Link 2

This LED glows bright blue when the Sender Unit and Receiver Unit are

connected using Cat-5 / Cat-6 cable.

2 DVI 2

ThisLEDasheson(brightblue)andoffwhenaDVIvideosourceisconnected

to the Sender Unit. The Sender Unit and Receiver Unit must also be connected

using a Cat-5 / Cat-6 cable.

3 Power Indicator

This LED will turn bright blue once the included 5V DC locking power supply has

been connected and plugged into an available electrical outlet.

4 Link 1

This LED glows bright blue when the Sender Unit and Receiver Unit are

connected using Cat-5 / Cat-6 cable.

5 USB

This LED glows bright blue when a USB source is connected to the Sender Unt.

6 DVI 1

ThisLEDasheson(brightblue)andoffwhenaDVIvideosourceisconnected

to the Sender Unit. The Sender Unit and Receiver Unit must also be connected

using a Cat-5 / Cat-6 cable.

7 Service

Mini-USBserviceportusedforupgradingthermware(primaryboard).

8 Link 1

Connects the Sender Unit to the Receiver Unit using Cat-5 / Cat-6 cable.

9 DVI In 1

Connect a DVI cable from the computer to this DVI-I connector.

10 USB In

Connects a USB cable from this port to the computer.

11 Service

Mini-USBserviceportusedforupgradingthermware(secondaryboard).

12 Link 2

Connects the Sender Unit to the Receiver Unit using Cat-5 / Cat-6 cable.

13 DVI In 2

Connect a DVI cable from the computer to this DVI-I connector.

14 5V DC Locking Power Connector

Connect the included 5V DC locking power supply to this connector.

SENDER UNIT DESCRIPTIONS

RECEIVER UNIT LAYOUT

Front

Back

1 3 6

8 9 10 12 13

Table des matières

Autres manuels Gefen Extenseur

Gefen

Gefen RS-232 Manuel utilisateur

Gefen

Gefen EXT-DVI-1CAT6 Manuel utilisateur

Gefen

Gefen EXT-UHD600-1SC Manuel utilisateur

Gefen

Gefen USB-MIDI Manuel utilisateur

Gefen

Gefen CAT5-9000HD-NI Manuel utilisateur

Gefen

Gefen EXT-USB-MINI2N Manuel utilisateur

Gefen

Gefen EXT-DP-CP-FM10 Manuel utilisateur

Gefen

Gefen EXT-DVI-2500HD Manuel utilisateur

Gefen

Gefen CAT5-7000HD Manuel utilisateur

Gefen

Gefen VDL-1000 Manuel utilisateur

Gefen

Gefen ADC-141 Manuel utilisateur

Gefen

Gefen EXT-HD-1000 Manuel utilisateur

Gefen

Gefen GTB-HDKVM-ELR Manuel utilisateur

Gefen

Gefen USB-500 Manuel utilisateur

Gefen

Gefen Pro DVI FM 2000 Manuel utilisateur

Gefen

Gefen ex-tend-it Firewire Extender Manuel utilisateur

Gefen

Gefen DVI-1000ST Manuel utilisateur

Gefen

Gefen EXT-3GSDI-FOSM Manuel utilisateur

Gefen

Gefen DVI 1500 Manuel utilisateur

Gefen

Gefen EXT-DP-141B Manuel utilisateur

Gefen

Gefen EXT-VGARS232-141 Manuel utilisateur

Gefen

Gefen ex-tend-it CAT5-1500 Manuel utilisateur

Gefen

Gefen EXTENDIT CAT5 8000S Manuel utilisateur

Gefen

Gefen EXT-DVI-FM2500 Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur