GeChic On-Lap 2101H Manuel utilisateur
Noces, Cauons & Warranty Exclusions —I
LCD Pixel Statement —II
FCC Statement —II
CE Declaraon of Conformity & WEEE Symbol Informaon —III
Chapter 1 Parts of On Lap Product & Accessories —1
Secon 1 Parts Descripon —1
Secon 2 Accessories Descripon —2
Chapter 2 Installaon Instrucons —3
Secon 1 Set up and Put away On-Lap 2101H —5
Secon 2 Use USB Type-C Port to Connect to MacBook or Other
PCs —5
Secon 3 Use USB Type-C Port to Connect to Smartphone —5
Secon 4 Connect to Nintendo Switch® —6
Secon 5 Use HDMI Port to Connect to PC, Game Console, etc. —6
Secon 6 Use USB-A or USB Type-C Port to Power the Monitor —7
Secon 7 Install Compute Sck or HDMI Wireless Display Adapter —7
Secon 8 Instrucon for Connecng to Headphones or Speakers —8
Chapter 3 Hot Keys, LED and OSD Instrucons —8
Secon 1 Hot Keys & LED Indicaons —8
Secon 2 OSD Descripon —8
Chapter 4 Product Specicaon —10
Secon 1 General Specicaon —10
Secon 2 Supported Operang Modes —11
Secon 3 Supported Video Modes —11
Chapter 5 Troubleshoong —12
English
Table of Contents
目次
日
本
語
—IV
—V
—V
—13
—13
—14
—15
—15
—17
—17
—18
—19
—20
—20
—21
—21
1. LED OSD —21
2. OSD —21
—24
1. —24
2. —25
3. —26
—26
I
Noces, Cauons & Warranty Exclusions
Warning: The sign alerts you to potenal hazards that can hurt you or dam-
age the product.
1. When moving the monitor, please turn o the power and unplug all the ca-
bles, and then close the stand and the I/O base, as the g. below. To move the
monitor, hold the bezel and the base of it. Do not hold the stand and the I/O
base when moving the monitor, which may make o the stand or break the
screen. Please hold the borders around the display area rather than press the
display area glass strongly.
2. Before carrying out the monitor, the monitor must be placed into the protec-
ve case (21A1) with the screen facing down, and avoid it being pressed or
collided by sharp objects. Before boarding a plane, do not check the protec-
ve case alone to avoid the monitor being damaged from falling or hing. If
need, please place the protecve bag in a sturdy suitcase and pack it strictly in
advance.
3. When using the USB-A or USB Type-C port on the monitor to power a PC, a
smartphone or Nintendo Switch®, the temperature of the I/O base will rise.
Please keep the top and boom of the base clean. Do not place paper, table
cloth, plasc cloth or other objects over
or beneath the I/O base. If need to use
the monitor to charge PC or other devic-
es over 1 hour, then DO NOT use at an
environment over 30°C.
4. It is recommended to use the monitor in
a well-venlated environment at room
temperature around 5 to 35 and
humidity around 45% to 85%. The moni-
tor should display connuously changing
images rather than displaying the same
and a sll image for a long me. If you
need to use this monitor in an abnormal environment such as high tempera-
ture, high humidity, conned space, low atmospheric pressure, etc., please
contact Gechic customer service center for further advice on usage environ-
ment.
II
5. Cleaning On-Lap Monitor
Unplug the power input before cleaning. Please use so cloth to clean touch
screen. For stubborn stains, please use lightly-dampened cloth to wipe again.
Do not use benzene, alcohol, thinner, ammonia, abrasive cleaners, com-
pressed air or other corrosive solvents. These solvents may cause permanent
damage on the screen or leave unremovable stain.
6. Do not expose the LCD panel to sunlight.
7. Please do not place the monitor on a shaky or unstable table, cupboard or
trolley and do not use the On-Lap Monitor on a moving vehicle. The Product
may be severely damaged from overturning or falling.
8. The product is not waterproof. Do not use this product in or near water.
9. High Volume Warning: High volume can lead to lasng damage to your hear-
ing. Please check the volume sengs before reproducing any sound.
10.Overuse of the monitor may result in vision damage. For every 30 minutes
with the monitor, give your eyes 10 minutes break. Avoid children under age 2
to watch with the monitor; prevent children over age 2 from watching with
the monitor over 1 hour per day.
11.Exclusions from Warranty Service
Please read the warranty terms below carefully, and follow the usage guide
and precauonary notes. Please keep this manual for future reference.
GeChic does not warrant uninterrupted or error-free operaon of this Prod-
uct. The warranty only covers failure /malfuncon under normal use condi-
ons during warranty period.
The warranty does not apply to the following condions:
(1)The product has been modied, disassembled, or reed or the bar code has
been removed, worn down or unidenable.
(2)Please use the included power supply adapter from the monitor package. Using
the wrong adapter may damage the electronic components inside the monitor.
(3)Display and touch funcon working normally; only variaon in appearance (i.e.,
ageing, arion, scratch, color changing, etc.).
(4)Any damage caused by disoperaon or failure to follow this manual. (i.e., Plug
or unplug the cable in wrong direcon and causing damage on cable or moni-
tor.)
(5)Any damage caused by hing or cracking monitor accidentally or purposely, or
collapsing or overturning monitor.
LCD Pixel Statement
There is slightly uneven brightness on the screen when displaying dierent screen
paern. The LCD screen has 99.99% or more eecve pixels. 0.01% of pixels or less may
not light or may light incorrectly. The On-Lap monitor uses a high quality LCD panel.
Nevertheless, pixels on the LCD screen may not light or appear as red or black dots. All
the above are normal with the LCD monitor and will not aect the normal usage of the
product.
Avoid placing the monitor against sun-light, or it may damage the monitor.
An aerimage of the previous screen may remain, when the same image is displayed for
hours. In this case, the screen is recovered slowly by turning o the power for a few
hours. Federal Communicaons Commission (FCC)
Class B Statement
Noce: This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to part 15B of the FCC Rules. These limits are de-
signed to provide reasonable protecon against harmful interference in a residenal
installaon.
If this equipment does cause harmful interference to radio or television recepon,
which can be determined by turning the equipment o and on, the user is encour-
aged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separaon between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Cauon:
Changes or modicaons not expressly approved by GeChic Corp. could void the
user's authority to operate the equipment.
Shielded interface cables and AC power cord, if any, must be used in order to comply
with the emission limits.
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modicaon to this equipment. It is the responsibilies of the user to
correct such interference.
CE Declaraon of Conformity
This product complies with the following standards:
●EN 62368-1:2014+A11:2017 (Safety requirement of Audio/video, infor-
maon and communicaon technology equipment)
●EN 55032:2015 Class B (Radio Disturbance requirement of Informaon
Technology Equipment).
●EN55024:2010+A1:2015(Immunity requirement of Informaon Technology
Equipment).
●EN 61000-3-2:2014 (Harmonic current emissions).
●EN 61000-3-3:2013 (Voltage uctuaons & icker) following provisions of
direcves applicable.
●AS/NZS CISPR 32: 2015
●2014/35/EU (Low Voltage Direcve).
●2004/108/EC (EMC Direcve).
●2005/32/EC (EuP Direcve, EC No. 1275/2008 implemenng Direcve for
Standby and O mode power consumpon) and is produced by a manufac-
turing organizaon on ISO9000 level.
WEEE Symbol Informaon
This symbol on the product, accessories or literature indicates that this prod-
uct and its electronic accessories (e.g., adapter, cables, and Rear Dock) must
not be disposed of with your other household waste. Instead, it is your respon-
sibility to dispose of these items by handing it over to a designated collecon
point for the recycling of waste electrical and electronic equipment.
For more informaon about where you can drop o your waste
equipment for recycling, please contact your local city oce, your
household waste disposal service or the shop where you purchased
the product.
For Disposal in Countries Outside of the European Union
If you wish to discard this product and its accessories in other area
and countries, please contact your local government for applicable
laws and regulaons governing the disposal of this product.
III
1
Chapter 1 Parts of On Lap Product & Accessories
Secon 1 Parts Descripon
Front
Input & Output Ports Back
2
Secon 2 Accessories Descripon
Monitor Carrying Bag (21A1)
AC/DC Power Supply Adapter(19V-4.6A)
Power Cord
HDMI-A Video Cable (1.5m)
USB Type-C Video Cable (1.0m)
Chapter 2 Installaon Instrucons
Secon 1 Set up and Put away On-Lap 2101H
3
(1)Please follow the steps below to set up the On-Lap2101H monitor.
◆Step 1 ◆
As shown below, pull out the magnetic buckle, erect the I/O Base,
and fit the tenon on the magnet buckle into the slot.
◆Step 2 ◆
As shown below, gently pull the rope on the inner bag to lift the monitor. Hold two sides of
the bottom of the monitor with both hands and take out the monitor from the monitor
carrying bag. Stand it on the table for using.
◆Step 3 ◆
As shown below, connect the power cord and the power supply adapter, and then connect
the USB Type- C video cable or HDMI video cable.
Watch How to’s
4
◆Adjust viewing angles
Fit the tenon on the buckle to the red line as
shown above. When attaching to the ○
1 slot,
the viewing angle is about 67 degrees.
Fit the tenon on the magnet buckle to the
red line as shown above. When attaching to
the second slot, the viewing angle is about
73 degrees.
(2) Please follow the steps below to put the On-Lap 2101H monitor into the
monitor carrying bag (21A1).
◆Step 1 ◆
Turn off the monitor and unplug all the cables.
Then, as shown on the right, hold two sides
of the bottom of the monitor by both hands.
Put the monitor into the monitor carrying
bag with the glass side facing down.
◆Step 2 ◆
Unfasten the tenon on the magnet
Buckle, and then lay flat the I/O base and
the aluminum alloy stand to the back of
the monitor.
◆Step 3 ◆
As shown on the right, fasten the monitor with
the belt. Put the cables and the power supply
adapter into the inner bag, and then zip it up.
Autres manuels pour On-Lap 2101H
1
Table des matières
Autres manuels GeChic Moniteur
GeChic
GeChic On-Lap 1002 Manuel utilisateur
GeChic
GeChic On-Lap 1306H-R Manuel utilisateur
GeChic
GeChic On-Lap M505E Manuel utilisateur
GeChic
GeChic M161H-R1 Manuel utilisateur
GeChic
GeChic T1 Series Manuel utilisateur
GeChic
GeChic OnLap 1302 Manuel utilisateur
GeChic
GeChic 1102 Manuel utilisateur
GeChic
GeChic On-Lap 2501 Series Manuel utilisateur
GeChic
GeChic On-Lap M505T/I Manuel utilisateur
GeChic
GeChic On-Lap 1502 Manuel utilisateur
