Gearhead CR6300 Manuel utilisateur

PID # 201137-109268

Rev. 090120

USB 2.0 SIM/Micro SD &

T-Flash Card Reader

Model #: CR6300

User’s Manual

All brand name and trademarks are the property of their respective owners

USER’S RECORD:

To provide quality customer service and technical support, it is suggested that you keep the

following information as well as your store receipt and this user’s manual.

Date of Purchase: ________________________________

Model Number: ________________________________

Serial Number: ________________________________

Product Rev Number (located below the UPC on the package): ____________________

FCC RADIATION NORM:

FCC

This equipment has been tested and found to comply with limits for Class B digital device pursuant

to Part 15 of Federal Communications Commission (FCC) rules.

FCC Compliance Statement

These limits are designed to provide reasonable protection against frequency interference in

residential installation. This equipment generates, uses, and can radiate radio frequency energy,

and if not installed or used in accordance with the instructions, may cause harmful interference to

radio communication. However, there is no guarantee that interference will not occur in television

reception, which can be determined by turning the equipment off and on. The user is encouraged

to try and correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment and the receiver

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected to.

CAUTION!

The Federal Communications Commission warns the user that changes or modifications to the

unit not expressly approved by the party responsible for compliance could void the user’s authority

to operate the equipment.

PACKAGE CONTENTS:

Your new card reader will ship with the following items:

- USB 2.0 SIM/Micro SD & T-Flash Card Reader

- Software Mini SC

- User’s Manual

- Warranty Information

SYSTEM REQUIREMENTS:

Please be sure that you meet all of the system requirements below to avoid difficulties during

installation:

- 100% PC Compatibles

- Windows®2000, XP, and Vista

- Available USB 2.0 Port

- Optical Drive (for software installation, slot loading drive not supported)

INSERTING MEMORY CARDS:

NOTE: The pictures shown in this User’s Manual are for demonstration purposes only. Your

computer or product may look slightly different. Please follow the slot guide on your card reader to

make sure the memory cards are inserted in their matching slots. Your card reader can read only

one card at a time.

For the inner card storage compartment: SIM card For the lower slot: Micro SD card

SOFTWARE INSTALLATION:

NOTE: The included software is for Windows®Operating Systems only. Please do not try to install

the software on Mac®operating systems.

For Windows® 2000®, XP, Vista

1. Turn on your computer.

2. Insert the enclosed driver CD into your CD-ROM drive, select the folder that matches your

operating system, double-click “setup” icon, the following screen will appear, click “Install”.

3. Follow the onscreen instructions to complete the software installation. When the driver

installation finish, the following screen will show up, click “Close” to exit.

4. You will find the “GSimReader APP” icon under “All Programs”.

USING THE SOFTWARE:

NOTE: The software is for editing your phone book stored on your SIM card.

1. Make sure your SIM card is installed in your card reader. Plug your card reader into an

available USB port of your computer.

2. Open “GSimReader APP” under “All Programs”, the following screen will appear on your

desktop.

File In this drop-down menu, you can open a Text File from your

computer, print and save the file after you have edited it in

the File Operation area. You can also exit the program by

clicking “Close” in the drop-down menu.

Function

Select “Phone book” or “Short Message Service” in this

drop-down menu, data of your phone book or short message

record from your SIM card will be displayed in the SIM

Operation area.

Management If you have use your phone or your Phone Service Provide

has enabled the PIN function of your SIM Card, you will

need to use “PIN Verify” function to enable the software to

read your SIM or use the “PIN Request” function to turn

on/off PIN function. Note: most SIM card do not have the

PIN function enabled. To avoid incompatibility issues, the

“Change Code” function for changing the PIN of your SIM

Card is disabled. Please use your phone to enable PIN.

Help Click to show the version of this program.

Click to initiate communication with your SIM card.

Note: Some older version SIM cards can’t be

initiated using this button. Please try the “Specific

Read“ button.

Click to open your phone book from your SIM card.

Click to open the short message record from your

SIM card.

Buttons SIM Operation:

It offers six tools

to edit the file

opened under

the SIM

Operation area.

Save the records read from your SIM Card to your

computer.

Click this icon to read some older version SIM cards

or when “Initiate SIM Card” is not able to read your

SIM card.

Save the data you have changed to your SIM card.

Open a file stored on your computer.

Save the edited file to your computer.

File Operation:

It offers three

tools to edit the

file opened

under the File

Operation area.

Delete selected data from the file.

Resplace data in the File Operation area with data

in the SIM Operation area.

Synchronize information between the file in the SIM

Operation area and the one in the File Operation

area.

Resplace data in the SIM Operation area with data

in the File Operation area

Edit

Add data from the SIM Operation area to the bottom

of the File Operation area.

SAFELY REMOVING USB DEVICES:

To prevent any loss of data and/or hardware damage you must safely remove your USB device

from your computer, please follow the instructions below:

For Windows 2000®, XP, Vista

1. Make sure your USB storage device is not in use and there’s no activity between your

computer and your USB device.

2. Click the “Safely Remove Hardware” icon in the system tray on your desktop.

For Windows 2000®, XP For Windows®Vista

3. Select the USB storage device that you want to remove from the list.

4. After a few second, a message will appear notifying you that it is now safe to remove your

USB device from your computer.

5. Now you can safely disconnect your USB storage device from your computer.

UNINSTALLING THE SOFTWARE:

To properly uninstall the software, please follow the instructions below:

1. On your desktop, click “start” in the system tray, click “Control Panel”.

For Windows 2000®, XP For Windows® Vista

2. Click “Add or Remove Programs” in the screen of Control Panel. For Windows® Vista user,

click “Programs and Features”

For Windows 2000®, XP For Windows® Vista

3. All of the programs installed on your computer will be displayed. Find and select “MA8128”,

click “Remove”. For Windows® Vista user, right-click “MA8128” and select “uninstall”.

For Windows 2000®, XP

For Windows® Vista

4. After the “MA8128” program is removed, find “Microsoft Visual C + + 2005

Redistributable” and select it, click “Remove”. For Windows® Vista user, right-click

“Microsoft Visual C + + 2005 Redistributable” and click “uninstall”.

For Windows 2000®, XP

For Windows® Vista

WARRANTY INFORMATION:

Gear Head, LLC warrants that this product shall be free from defects in materials and

workmanship for the reasonable lifetime of the product. If the product is defective, Gear Head,

LLC’s sole obligation under this warranty shall be at its election, subject to the terms of this

warranty, to repair or replace any parts deemed defective. This warranty is for the exclusive

benefit of the original purchaser and is not assignable or transferable. THIS WARRANTY IS

MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND ANY IMPLIED

WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE TERMS OF THIS

WARRANTY, UNLESS OTHERWISE PROHIBITED BY LAW.

Exclusions

To the fullest extent permitted by law, Gear Head, LLC expressly disclaims and excludes from this

warranty any liability for damages, including but not limited to general, special, indirect, incidental,

consequential, aggravated, punitive or exemplary damages, and economic loss (even if Gear

Head™ is informed of their possibility), third party claims against you, including for any loss or

damages, and claims or damages related to loss of, or, damage to, your records or data. This

warranty does not apply to any product the exterior of which has been damaged or defaced. This

warranty will be voided by misuse, improper physical environment, improper repair, acts of God,

war or terror, commercial use, and improper service, operation or handling.

Technical Support

Please access Technical Support on the web or contact our technicians at [email protected]

for help.

www.pcgearhead.com

Gear Head™ provides phone support, 866-890-7115, Monday - Friday from 9:00 am – 5:30 pm

Eastern Time. Before calling, please make sure you have available the Model # (located on the

front page of your User’s Manual) and information regarding your computer’s operating system.

Return Merchandise for Service

Any claim under this warranty must be made in writing to Gear Head, LLC, within 30 days after the

owner discovers the circumstances giving rise to any such claim, and must include a copy of this

warranty document, a receipt or copy of your invoice marked with the date of purchase, and the

original packaging. You may contact us on the web at www.pcgearhead.com or by emailing us at

[email protected] to receive service or request a return service authorization.

Table des matières

Autres manuels Gearhead Lecteur de cartes

Gearhead

Gearhead CR4200 Manuel utilisateur

Manuels Lecteur de cartes populaires d'autres marques

Lindy

Lindy 43185 Manuel utilisateur

Lindy

Lindy 43185 Manuel utilisateur

ViziT

ViziT RD-4F Manuel utilisateur

Jinmuyu Electronics

Jinmuyu Electronics MR811 Series Manuel utilisateur

AVID ID

AVID ID AVID1043 Manuel utilisateur

Conrad

Conrad PCMCIA Manuel utilisateur

Rosslare

Rosslare DR-6255 Manuel utilisateur

Lindy

Lindy 51541 Manuel utilisateur

Diapro T?bbi Ürünler

Diapro T?bbi Ürünler Across System Manuel utilisateur

Johnson Controls

Johnson Controls Kantech tyco ioSmart Manuel utilisateur

ACS

ACS ACR122L Manuel utilisateur

Secukey

Secukey S2-MF Manuel utilisateur

Elecom

Elecom MR-SMC07 series Manuel utilisateur

Alien

Alien ALR-9800 Manuel utilisateur

ACS

ACS ACR310 Manuel utilisateur

Datamars

Datamars R-IN1300 MID Manuel utilisateur

Alarm Lock

Alarm Lock AL-PRE2 Manuel utilisateur

xpr

xpr B100PROX-AH Guide de l'utilisateur