GE 28223EE1 Manuel utilisateur
Your telephone equipment is approved for connection to the Public Switched
Telephone Network and is in compliance with parts 15 and 68, FCC Rules and
Regulations and the Technical Requirements for Telephone Terminal Equipment
published by ACTA.
On the bottom of this equipment is a label indicating, among other information, the
US number and Ringer Equivalence Number (REN) for the equipment. You must, upon
request, provide this information to your telephone company.
The REN is useful in determining the number of devices you may connect to your
telephone line and still have all of these devices ring when your telephone number is
called. In most (but not all) areas, the sum of the RENs of all devices connected to one
line should not exceed 5. To be certain of the number of devices you may connect to
your line as determined by the REN, you should contact your local telephone company.
A plug and jack used to connect this equipment to the premises wiring and telephone
network must comply with the applicable FCC Part 68 rules and requirements adopted
by the ACTA. A compliant telephone cord and modular plug is provided with this
product. It is designed to be connected to a compatible modular jack that is also
compliant. See installation instructions for details.
• This equipment may not be used on coin service provided by the telephone
company.
• Party lines are subject to state tariffs, and therefore, you may not be able to use
your own telephone equipment if you are on a party line. Check with your local
telephone company.
• Notice must be given to the telephone company upon permanent
disconnection of your telephone from your line.
• If your home has specially wired alarm equipment connected to the telephone
line, ensure the installation of this product does not disable your alarm
equipment. If you have questions about what will disable alarm equipment,
consult your telephone company or a qualied installer.
Should your equipment cause trouble on your line which may harm the telephone
network, the telephone company shall, where practicable, notify you that temporary
discontinuance of service may be required. Where prior notice is not practicable and
the circumstances warrant such action, the telephone company may temporarily
discontinue service immediately. In case of such temporary discontinuance, the
telephone company must: (1) promptly notify you of such temporary discontinuance;
() afford you the opportunity to correct the situation; and () inform you of your right to
bring a complaint to the Commission pursuant to procedures set forth in Subpart E of
Part 68, FCC Rules and Regulations.
The telephone company may make changes in its communications facilities,
equipment, operations or procedures where such action is required in the operation
of its business and not inconsistent with FCC Rules and Regulations. If these changes
are expected to affect the use or performance of your telephone equipment, the
telephone company must give you adequate notice, in writing, to allow you to maintain
uninterrupted service.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference; and () This
device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
Privacy of Communications may not be ensured when using this product.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna (that is, the antenna for radio or
television that is “receiving” the interference).
• Reorient or relocate and increase the separation between the
telecommunications equipment and receiving antenna.
• Connect the telecommunications equipment into an outlet on a circuit different
from that to which the receiving antenna is connected.
If these measures do not eliminate the interference, please consult your dealer or an
experienced radio/television technician for additional suggestions. Also, the Federal
Communications Commission has prepared a helpful booklet, “How To Identify and
Resolve Radio/TV Interference Problems.” This booklet is available from the U.S.
Government Printing Ofce, Washington, D.C. 00. Please specify stock number 00-
000-005- when ordering copies.
Notice: The changes or modications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This telephone system meets FCC standards for Hearing Aid Compatibility.
Licensed under US Patent 6,7,009.
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 0 centimeters between the radiator and your body. This
transmitter must not be co-located or operated in conjunction with any other antenna
or transmitter.
For body worn operation, this phone has been tested and meets the FCC RF exposure
guidelines when used with the belt clip supplied with this product. Use of other
accessories may not ensure compliance with FCC RF exposure guidelines.
This telephone is compliant with the DECT 6.0 standard which
operates in the 1.9GHz to 1.9GHz frequency range. Installation of
this equipment is subject to notication and coordination with UTAM.
Any relocation of this equipment must be coordinated through and
approved by UTAM. UTAM may be contacted at 1-800-9-886.
5
Parts Checklist ...........................................7
Telephone Jack Requirements ..........8
Digital Security System .........................8
Important Installation Guidelines.....9
Front View ................................................ 10
Top View .................................................... 10
Display Icons ........................................... 11
Installing the Handset Battery ........ 1
Base Station ............................................ 1
Answerer ................................................... 1
Handset Access ..................................... 15
Message Alert ......................................... 16
Security Code ........................................ 16
Speaker Volume .................................... 17
Voice Instruction ................................... 17
Recording the Outgoing
Announcement............................... 17
Reviewing and Choosing the
Announcement............................... 18
Standby Screen ...................................... 0
Programming Functions .................... 0
Room Monitor ......................................... 0
Alarm Clock..............................................
Initial Setup ..............................................
Handset Name .....................................
Date and Time ......................................
Area Code ...............................................
Tone/Pulse .............................................
Language ............................................... 5
Auto Talk ................................................. 5
Registration ........................................... 6
De-Registration ................................... 7
Global De-registration ...................... 8
Sound Setup ............................................ 8
Ringer Tone ........................................... 9
Ringer Volume ...................................... 9
Key Tone ................................................. 0
Reset Setting ........................................... 0
Voicemail ................................................ 0
All Settings ............................................. 1
Visual Indicators .................................... 1
VMWI / Visual Ringer Indicator on
Handset .............................................
Call Timer ..................................................
Auto Standby ..........................................
Ringer Volume (Shortcut) ..................
Flash/Call Waiting ................................
Last Number Redial .............................
Exit ............................................................... 5
Page ............................................................ 5
Paging from the Base/Group
Page..................................................... 5
Mute ............................................................ 5
6
Receiver Volume Control ................... 5
Do Not Disturb (D-N-D) ....................... 6
Making an Auto Intercom Call ........ 6
Advanced Intercom Features.......... 8
Call Waiting Caller ID .......................... 0
Receiving CID Records ........................ 0
Storing CID Records ............................. 1
Reviewing CID Records ...................... 1
Dialing a CID Number ......................... 1
Storing CID Records in Internal
Memory ..............................................
Deleting All CID Records ....................
Review Records .....................................
Add Records ............................................
Inserting a Pause in the Dialing
Sequence .......................................... 5
Edit Records ............................................. 6
Delete Records ....................................... 6
Dialing a Number from Internal
Memory .............................................. 7
Message Counter Indicator.............. 8
Leaving a Message/Memo ............... 9
Screening Calls from the Base ........ 9
Messages Playback ............................. 50
Memory Full ............................................. 50
Erasing Messages ................................. 50
Cordless Handset .................................. 51
Screening Calls from the Handset 51
Accessing the Answering System from
Another Location ........................... 5
Memory Full ............................................. 5
Battery Safety Precautions .............. 5
Caller ID Solutions .............................. 57
Cordless Phone Solutions ............... 58
Battery Solutions ................................ 59
7
Make sure your package includes the items shown here.
For there will be additional handset, charge
cradle, belt clip, battery pack and cover than shown above.
8
For there will be additional handsets, charge
cradles, belt clips, battery packs and covers than shown above.
For there will be additional handsets, charge
cradles, belt clips, battery packs and covers than shown above.
For there will be additional handsets, charge
cradles, belt clips, battery packs and covers than shown above.
For there will be additional handsets, charge
cradles, belt clips, battery packs and covers than shown above.
To use this phone, you need an RJ11C type
modular telephone jack, which might look like
the one pictured here, installed in your home.
If you don’t have a modular jack, call your
local phone company to nd out how to get
one installed.
Your cordless phone uses a digital security system to protect against
false ringing, unauthorized access, and charges to your phone line.
9
• Avoid sources of noise and heat, such as motors, uorescent
lighting, microwave ovens, heating appliances and direct
sunlight.
• Avoid areas of excessive dust, moisture and low temperature.
• Avoid other cordless telephones or personal computers.
• Never install telephone wiring during a lightning storm.
• Never install telephone jacks in wet locations unless the jack is
specically designed for wet locations.
• Never touch non-insulated telephone wires or terminals, unless
the telephone line has been disconnected at the network
interface.
• Use caution when installing or modifying telephone lines.
10
56
Ce manuel convient aux modèles suivants
8
Table des matières
Autres manuels GE Téléphone IP
GE
GE ATS7200 Manuel utilisateur
GE
GE 28111EE2 Manuel utilisateur
GE
GE 28861 Manuel utilisateur
GE
GE Cell Fusion 28129FE2 Manuel utilisateur
GE
GE 28320EE2 - Dect 6.0 InfoLink 2 Manuel utilisateur
GE
GE 28225 Series Manuel utilisateur
GE
GE 28321EE1 Manuel utilisateur
GE
GE Cell Phone 28127FE1 Manuel du propriétaire
GE
GE 28320EE2 - Dect 6.0 InfoLink 2 Manuel utilisateur
GE
GE Cell Fusion 28127FE1 Manuel utilisateur
