GE 21018 Manuel utilisateur
1
We bring good things to life.
2.4 GHz Dual Cordless Handset
Call Waiting Caller ID
Speakerphone System
User’s Guide
21018
2
IMPORTANT INFORMATION
NOTICE: This product meets the applicable Industry Canada technical specifications.
The equipment must be installed using an acceptable method of connection. The customer
should be aware that compliance with the above conditions may not prevent degradation of
service in some situations.
Repairs to certified equipment should be made by an authorized Canadian maintenance
facility designated by the supplier. Any repairs or alterations made by the user to this
equipment, or equipment malfunctions, may give the telecommunications company cause to
request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the
power utility, telephone lines and internal metallic water pipe systems, if present, are
connected together.This precaution may be particularly important in rural areas.
CAUTION: Users should not attempt to make such connections themselves, but should
contact the appropriate electric inspection authority, or electrician, as appropriate.
NOTES: This equipment may not be used on coin service provided by the telephone company.
INTERFERENCE INFORMATION
This equipment generates and uses radio frequency energy which may interfere with
residential radio and television reception if not properly installed and used in accordance
with instructions contained in this manual. Reasonable protection against such interference
is ensured, although there is no guarantee this will not occur in a given installation. If
interference is suspected and verified by switching this equipment on and off, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient the radio/television receiver’s antenna, relocate the equipment with respect to the
receiver, plug the equipment and receiver into separate circuit outlets.The user may also
wish to consult a qualified radio/television technician for additional suggestions. This
equipment has been fully tested and complies with all limits for Class B computing devices
pursuant to part 15 FCC Rules and Regulations. This device complies with RSS-210 of
Industry Canada. Operation is subject to the following two conditions: (1) This device may
not cause interference, and (2) This device must accept any interference, including
interference that may cause undesired operation of the device.
HEARING AID COMPATIBILITY (HAC)
This telephone system meets FCC/Industry Canada standards for Hearing Aid Compatibility.
REN NUMBER IS LOCATED ON THE CABINET BOTTOM
3
IMPORTANT INFORMATION ....................... 2
INTERFERENCE INFORMATION ................... 2
HEARING AID COMPATIBILITY (HAC) ....... 2
TABLE OF CONTENTS ............................. 3
FCC RF RADIATION EXPOSURE STATEMENT5
INTRODUCTION ..................................... 5
HANDSET LAYOUT ................................ 7
BASE LAYOUT ...................................... 8
HANDSET CHARGE CRADLE LAYOUT ......... 8
PARTS CHECKLIST ................................. 9
TELEPHONE JACK REQUIREMENTS ........ 9
INSTALLATION ..................................... 10
INSTALLATION GUIDELINES ................ 10
INSTALLING THE PHONE .................... 11
CONNECTING THE AC (ELECTRICAL)
POWER .......................................... 11
CONNECTING THE TELEPHONE LINE .... 11
INSTALLING THE HANDSET BATTERY ... 12
PROGRAMMING THE TELEPHONE ............ 13
STANDBY SCREEN ........................... 13
PROGRAMMING FUNCTIONS .............. 13
ROOM MONITOR ......................... 13
HANDSET SETUP ......................... 14
LANGUAGE ............................. 14
HANDSET NAME ...................... 14
RINGER TONE ......................... 15
RINGER VOLUME ..................... 15
VIP MELODY .......................... 16
STORING VIP MELODY ............. 16
CHANGING ASTORED VIP MELODY
RECORD ................................. 17
REVIEWING AND DELETING STORED
VIP MELODY RECORD .............. 17
AREA CODE ............................ 17
KEY TONE .............................. 17
REGISTRATION ............................. 18
DE-REGISTRATION ....................... 18
GLOBAL DE-REGISTRATION ............ 19
DEFAULT SETTING ....................... 19
TELEPHONE OPERATION ....................... 20
CHARGE INDICATOR ......................... 20
MAKING CALLS .............................. 20
ANSWERING CALLS ......................... 20
CALL TIMER ................................... 20
AUTO STANDBY .............................. 21
RINGER HI/LOW/OFF ................... 21
FLASH/CALL WAITING ..................... 21
LAST NUMBER REDIAL ..................... 22
EXIT ............................................. 22
PAGE ............................................ 22
HANDSET TO HANDSET PAGING ..... 22
PAGING ALL HANDSETS FORM A
HANDSET ................................... 23
PAGING FROM THE BASE/GROUP
PAGE ........................................ 23
MUTE ........................................... 23
SEE MARKING ON BOTTOM / BACK OF PRODUCT
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING:TO
PREVENT FIRE OR
ELECTRICAL SHOCK
HAZARD, DO NOT
EXPOSETHIS
PRODUCT TO RAIN
OR MOISTURE.
THE LIGHTNING
FLASH AND ARROW
HEAD WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
“DANGEROUS
VOLTAGE” INSIDE
THE PRODUCT.
CAUTION: TO REDUCE THE
RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR
BACK). NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
IMPORTANT
INSTRUCTIONS
ACCOMPANYING
THE PRODUCT.
CAUTION:
TABLE OF CONTENTS
4
SAVE THESE INSTRUCTIONS
RECEIVER VOLUME CONTROL ............ 23
DONOT DISTURB (DND) ............... 23
ANSWERING ACALL WITH THE
HANDSET ....................................... 24
MAKING ACALL WITH THE HANDSET .. 24
INTERCOM OPERATION ......................... 24
MAKING AN INTERCOM CALL ......... 24
RECEIVING AN INTERCOM CALL ...... 25
ADVANCED INTERCOM FEATURES ........ 25
RECEIVING AN INCOMING TELEPHONE
CALL DURING AN INTERCOM CALL .. 25
USING INTERCOM WITH EXTERNAL
TELEPHONE CALLS ....................... 25
TWO-WAY CALLING ........................ 25
THREE-WAY CALLING ...................... 25
TRANSFERRING EXTERNAL CALLS TO
OTHER HANDSETS .......................... 26
MEMORY ........................................... 26
STORING ANAME AND NUMBER IN
MEMORY ....................................... 26
STORING THE LAST NUMBER DIALED .27
INSERTING APAUSE IN THE DIALING
SEQUENCE (OF ASTORED NUMBER)..27
REVIEWING RECORDS STORED IN
MEMORY ....................................... 28
CHANGING RECORDS STORED IN
MEMORY ....................................... 28
DELETING RECORDS STORED IN
MEMORY ....................................... 28
DIALING ANUMBER FROM MEMORY .. 28
CHAIN DIALING FROM MEMORY ......... 29
CALLER ID (CID) ............................... 29
CID ERROR CODES ......................... 30
RECEIVING CID RECORDS ................. 30
STORING CID RECORDS (INCALLER ID
MEMORY) ...................................... 30
REVIEWING CID RECORDS ................ 30
STORING CID RECORDS IN INTERNAL
MEMORY ....................................... 31
DIALING ACID NUMBER .................. 31
DELETING ACID RECORD ................ 32
DELETING ALL CID RECORDS ........... 33
CHANGING THE BATTERY ...................... 33
BATTERY SAFETY PRECAUTIONS ........ 34
BELT CLIP AND OPTIONAL HEADSET ....... 34
CONNECTING THE BELT CLIP ............. 34
CONNECTING AN OPTIONAL HEADSET TO
THE HANDSET ................................. 34
DISPLAY MESSAGES ............................ 35
HANDSET SOUND SIGNALS .................. 37
TROUBLESHOOTING GUIDE ................... 37
GENERAL PRODUCT CARE .................... 40
CAUSES OF POOR RECEPTION ............... 40
TELEPHONE NETWORK INFORMATION ...... 40
REN NUMBER ................................... 41
INDEX ............................................... 42
SERVICE ............................................ 44
ACCESSORY ORDER FORM ................... 45
5
FCC RF RADIATION EXPOSURE STATEMENT
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment.This equipment should be installed and operated with a
mininum distance of 20 centimeters between the radiator and your body.This
transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter.”
For body worn operation, this phone has been tested and meets the FCC RF
exposure guidelines when used with the belt clip supplied with this product. Use
of other accessories may not ensure compliance with FCC RF exposure guidelines.
INTRODUCTION
CAUTION: When using telephone equipment, there are basic safety
instructions that should always be followed. Refer to the IMPORTANT
SAFETY INSTRUCTIONS provided with this product and save them for
future reference.
Congratulations on purchasing the GE Dual Cordless HandsetTelephone System.This
system operates in the 2.4 GHz frequency range, and is unique to conventional
cordless telephones. When the base is connected to electrical power and a telephone
line, you can place a fully-featured cordless handset anywhere electrical power is
available.
Features:
• 2.4 GHz digital technology
• Handset to Handset Intercom
• 3-way Conference/CallTransfer
• Call Waiting and Caller ID Compatible
• VIP Melody
• Up to 50 Name and Number Memory Dialing
• Do Not Disturb
• Room Monitor between Handset and Handset
This telephone has been designed to be simple to use, however, you can reach its full
potential more quickly by taking a few minutes to read this Instruction Book.This
telephone is a multifunction product for use with Call Waiting and Caller ID services
available from your local telephone company.
6
Your Caller ID Call Waiting phone allows you to:
• View the name and telephone number of a caller (Call Waiting Caller ID)
while you are on the phone.
• Identify callers before you answer the phone.
• View the time and date of each incoming call.
• Record up to 40 Caller ID messages sequentially.
• Know who called while you are on the other line or when you were away.
• Screen unwanted calls, eliminate harassment from annoying calls, or to
get prepared before answering a call.
IMPORTANT: Because cordless phones operate on electricity, you should
have at least one phone in your home that isn’t cordless, in case the power in
your home goes out.
IMPORTANT: In order to use all of the features of this telephone, you must
subscribe to two separate services available from your local telephone
company: the standard Name/Number Caller ID Service to know who is
calling when the phone rings and Call Waiting Caller ID Service to know who
is calling while you are on the phone.
7
HANDSET LAYOUT
TALK/END/
callback (button)
display
format/conf
(format/conference button)
cid/vol (up or down arrow)
(caller ID/volume button)
redial (button)
page/int
(page/intercombutton) flash (button)
*exit (button)
#pause/ringer
(button)
mute/prog
(mute/program button)
mem
(memory button)
del
(delete button)
SPKR
(speaker button)
8
BASE LAYOUT
HANDSET CHARGE CRADLE LAYOUT
Back Side
charge indicator
AC power supply
page button in use/charge indicator
do not disturb button
9
PARTS CHECKLIST
Make sure your package includes the items shown here.
TELEPHONE JACK REQUIREMENTS
To use this phone, you need an RJ11C (CA11A) type
modular phone telephone jack, which might look like the
one pictured here, installed in your home. If you don’t
have a modular jack, call your local phone company to
find out how to get one installed.
Modular
telephone
line jack
Wall plate
Base
Dual Handsets Belt clips
AC power supply
Telephone line
cord Handset Charge Cradle
10
INSTALLATION
INSTALLATION NOTE: Some cordless telephones operate at frequencies that
may cause interference to nearby TVs, microwave ovens, and VCRs. To minimize
or prevent such interference, the base of the cordless telephone should not be
placed near or on top of a TV, microwave ovens, or VCR. If such interference
continues, move the cordless telephone farther away from these appliances.
Certain other communications devices may also use the 2.4 GHz frequency for
communication, and, if not properly set, these devices may interfere with each
other and/or your new telephone. Typical devices that may use the 2.4 GHz
frequency for communication include wireless audio/video senders, wireless
computer networks, multi-handset cordless telephone systems, and some long-
range cordless telephone systems.
• Never install telephone wiring during a lightning storm.
• Never install telephone jacks in wet locations unless the jack is
specifically designed for wet locations.
• Never touch non-insulated telephone wires or terminals, unless the
telephone line has been disconnected at the network interface.
• Use caution when installing or modifying telephone lines.
• Temporarily disconnect any equipment connected to the phone such as
faxes, other phones, or modems.
INSTALLATION GUIDELINES
• Install telephone near both a telephone (modular) jack and an electrical
power outlet.
• Avoid sources of noise, such as a window by a busy street, and electrical
noise, such motors, microwave ovens, and fluorescent lighting.
• Avoid heat sources, such as heating air ducts, heating appliances,
radiators, and direct sunlight.
• Avoid areas of excessive moisture or extremely low temperature.
• Avoid dusty locations.
• Avoid other cordless telephones or personal computers.
Autres manuels pour 21018
2
Table des matières
Langues :
Autres manuels GE Téléphone sans fil
GE
GE 26938 Manuel utilisateur
GE
GE 28511 Manuel utilisateur
GE
GE 26990 Manuel utilisateur
GE
GE 28522AE1 Manuel utilisateur
GE
GE 25922GE1 Manuel utilisateur
GE
GE 22430 Manuel utilisateur
GE
GE 27700 Manuel utilisateur
GE
GE 28512 1-A Series Manuel utilisateur
GE
GE 29111 Series Manuel utilisateur
GE
GE 15362520 Manuel utilisateur
GE
GE 28512 Manuel utilisateur
GE
GE 2-7730 Manuel utilisateur
GE
GE 25836 Manuel utilisateur
GE
GE 26928GE1 Manuel utilisateur
GE
GE 21878 Manuel utilisateur
GE
GE 26920 Series Manuel utilisateur
GE
GE 27930/31A Manuel utilisateur
GE
GE 25951 Series Manuel utilisateur
GE
GE Feb-63 Manuel utilisateur
GE
GE 22437 Manuel utilisateur
