GE IC755ACC07ADP Manuel utilisateur
GE
Intelligent Platforms
Operator Interface Products
QuickPanel+7” Display Adapter Kit
IC755ACC07ADP
Installation Guide, GFK-2895A
October 2014
2 IC755ACC07ADP Installation Guide GFK-2895A
1. Overview
Attention: The UL Markings, ATEX Marking, and
all environmental ratings (NEMA4,
UL50 Type 4X, and IP65) have not
been validated for the QuickPanel+7”
Display when used with the adapter.
Therefore, the agency compliances
and standards do not apply to a
QuickPanel+7” Display with an
installed Adapter Kit.
Note: The use of a correctly installed adapter does
not affect the QuickPanel+product’s
compliance with CE Marking.
The QuickPanel+7” Display adapter kit facilitates
mounting the QuickPanel+7” Display into a panel with
a cutout previously sized for a QuickPanel 8” Display.
The QuickPanel+7” Display should first be inserted
into the adapter and secured using the clamps
provided with the display. The assembly is then
inserted into the 8” cutout in the customer panel.
Note: For user manuals, product updates, and
other information, go to the Support website
at http://www.ge-ip.com/support and refer to
Operator Interfaces and PC.
GFK-2895A IC755ACC07ADP Installation Guide 3
1.1 Functional Compatibility
The adapter kit can be used with the following
QuickPanel+7” Display units:
Part Number Description
IC755CxW07CDx QuickPanel
+
7” Display
1.2 Adapter Kit Contents
Component Qty
Plastic adapter assembly
(with attached gasket) 1
Mounting clamps 4
Slotted screws 8
4 IC755ACC07ADP Installation Guide GFK-2895A
1.3 Adapter Kit Features
The following figure displays the QuickPanel+7”
Display and adapter kit assembly properly installed
into a customer panel.
Mounting bracket (Qty 4)
Slotted screw (Qty 8)
Customer panel
Adapter
QuickPanel
+
Display
Assembly Installed in Customer Panel (Side View)
GFK-2895A IC755ACC07ADP Installation Guide 5
1.4 Panel Cutout Dimensions
The QuickPanel+ 7” Display adapter kit requires the
panel cutout dimensions displayed in the following
figure.
Adapter
227.84 mm (8.97 in)
186.44 mm (7.34 in)
Adapter Kit in Customer Panel (Rear View)
6 IC755ACC07ADP Installation Guide GFK-2895A
2. Installation
Notes:
The unit will not fit through the panel cutout with
a Secure Digital (SD) card not fully inserted and
recessed in the port.
The unit will not fit through the cutout with
cables attached.
To install the QuickPanel+ 7” Display adapter
assembly
1. If there is an SD card in the QuickPanel+7”
Display SD port, remove it. Also remove any
cables that may interfere with installation.
2. Insert the QuickPanel+7” Display into the
adapter/gasket assembly until the side snaps
click into the display housing. Maintain the
orientation of the display in relation to the adapter
to ensure proper clearance around display ports
and cooling vents.
GFK-2895A IC755ACC07ADP Installation Guide 7
Display
Adapter
assembly
Adapter
side snap
(Qty 2)
Adapter/Gasket Assembly with Side Snaps
3. Adjust the mounting bracket screw so the bottom
guide on the screw contacts the bottom surface
of the metal bracket body. The guide assists with
mounting bracket insertion.
Bracket body
Guide
Mounting Bracket Guide
8 IC755ACC07ADP Installation Guide GFK-2895A
4. Install the four mounting brackets supplied with
each QuickPanel+7” Display. Use the display
housing slots and the round adapter recesses to
locate each of the brackets.
Display
housing slot
Adapter recess
Display Housing Slot and Adapter Recess
Mounting bracket (Qty 4)
Installed Mounting Bracket
GFK-2895A IC755ACC07ADP Installation Guide 9
Installed Mounting Bracket (Close-up)
5. Using a #2 Phillips screwdriver, torque each
screw to a maximum of 0.11 to 0.23 Nm
(1 to 2 in-lb).
10 IC755ACC07ADP Installation Guide GFK-2895A
6. Insert the QuickPanel+7” Display adapter
assembly into the cutout panel as displayed in
the following figure. The gasket on the assembly
should touch the panel’s front surface once it is
fully inserted.
Inserting Assembly in Panel
Table des matières
Autres manuels GE Adaptateur
GE
GE Digital Energy 1018959 Manuel utilisateur
GE
GE PACSystems RSTi Manuel utilisateur
GE
GE CPCI3UX606 Guide rapide de l'utilisateur
GE
GE PACSystems RSTi Manuel utilisateur
GE
GE VersaMax IC200SET001 Manuel utilisateur
GE
GE Masoneilan VECTOR V1100 Manuel utilisateur
GE
GE Digital Energy 1018959 Manuel utilisateur
GE
GE RAK7022 Manuel utilisateur
GE
GE RAK7023 Manuel utilisateur
GE
GE Digital Energy 1018959 Manuel utilisateur
