GCS ProxiPen Instructions de montage
ProxiPe n an d W inDAU Instal lation Manual
ProxiPen Hardware and
WinDAU Software Installation Manual
1
ProxiPen and WinDAU Installation Manual
PROXIPEN HARDWARE AND WINDAU SOFTWARE INSTALLATION MANUAL
TABLE OF CONTENTS
General Information………………………………………………………………………………………………….3
I. Setting Up ProxiPen……………………………………………………………………………………………….4
II. Installing WinDAU Software and Components………………………………………………………………...5
A. Installing MDAC…………………………………………………………………...…………………….5
B. Installing SLMan32……………………………………………………………..……………………….7
C. Installing WinDAU………………………………………………………………..……………………13
III. Configuring WinDAU……………………………………………………………………………………………17
IV. Dongle Installation………………………………………………………………………………..…………….20
V. Setting Up Tours…………………………………………………………………………………...……………23
A. Adding Start Points…………………………………………………………………………………….24
B. Adding Control Points………………………………………………………………………...……….27
C. Adding Personnel………………………………………………………………………………..…….29
D. Adding Incidents..……………………………………………………………………………………...32
E. Adding Breaks (Enterprise Edition)………………………….………………………………………35
F. Adding Maps (Enterprise Edition)……………………………………………………………………38
VI. Using ProxiPen and WinDAU Together…………………………………………………………….………..41
A. Executing A Tour………………………………………………………………………………...…….41
B. Generating Reports……………………………………………………………………………………41
C. Report Summary Examination……………………………………………………...………………..43
VII. Login: Administrator versus User……………………………………………………………..……………..45
VIII. WinDAU Screen Details………………………………………………………………………………………47
IX. GCS Start Menu Options………………………………………………………………………………...…….53
X. Installing Over Older Versions of WinDAU………………………………………………………………..….54
XI. Alternate Configurations…………………………………………………………………………………….…55
XII. Service Patches / Fixes……………………………………………………………………………………….56
XIII. Help and Support…………………………………………………………………………………………..….58
2
ProxiPen and WinDAU Installation Manual
4
I. Setting Up ProxiPen
1. Remove ProxiPen, cradle (Data Transfer Unit – DTU) and cables from box.
2. Attach one end of the serial cable that comes with the ProxiPen (GCS 9-pin to 9-pin cable) to the
DTU and the other end to the serial port on the back of the PC.
3. Plug the power cable into the connection next to the serial port on the DTU and into a power
outlet.
4. Open the cap on the ProxiPen and remove the battery protector (small piece of paper or
cardboard). Replace cap.
5. Place ProxiPen in cradle.
NOTE: The Power, Pen and Online LEDs should illuminate on the DTU when connected properly.
ProxiPen and WinDAU Installation Manual
5
II. Installing WinDAU Software and Components
1.
2.
3.
4.
5.
6.
Close all programs that are running and place the WinDAU CD into CD-ROM on the PC to be
used as the download and/or reporting machine.
The CD should automatically run the setup file. If not, click the Start button in Windows and then
select Run.
Click Browse and navigate to the CD-ROM drive that contains the WinDAU CD (should be
labeled WinDAU 1.1.101).
Click the Setup.exe file and then click Open.
Click OK in the Run dialog box.
Setup will prompt you to select a language (default is English). Select the appropriate language
and click OK.
7. From the Master Setup window, MDAC, SLMan32 and WinDAU will all need to be installed.
Section A
Step #8
Section B
Step #9
Section C
Step #19
A. Installing MDAC
MDAC, Microsoft Data Access Component, is a required component for WinDAU in order to allow for
viewing of GCS reports via the WinDAU report viewer application and database integration.
8. Click Install next to the MDAC Version 2.5 box.
NOTE: If you are running a system that has Microsoft Access installed (a similar component to
MDAC), you may get an error message stating that MDAC is already installed.
ProxiPen and WinDAU Installation Manual
6
If so, click OK to continue. Then, go to Section B. Install Software License Manager (SLMan32).
9. Mark the check box next to “Yes, I accept all of the terms of the preceding license agreement.”
Then, click Next.
10. Click Next through the Installing the Software screen.
ProxiPen and WinDAU Installation Manual
7
11. Click Finish on the Setup is Complete screen.
B. Installing Software License Manager (SLMan32)
SLMan32 is a required component to run the WinDAU software. The Software License Manager is not
actually engaged unless WinDAU Enterprise Edition is being used.
NOTE: If you do not know if you are using WinDAU or WinDAU Enterprise Edition, please contact your
security, purchasing or network administrator for verification. WinDAU Enterprise Edition requires a
dongle for activation.
12. Now, select the Install button next to SLMan32.
ProxiPen and WinDAU Installation Manual
8
13. Close any applications that may be running and click Next through the Welcome screen.
Enter your User Information. NOTE: All fields are required in order to continue.14.
ProxiPen and WinDAU Installation Manual
9
15. Click Next through Choose Destination Location. Default installation drive will be C:\.
16. Under the Select Components screen, click Next for the default options unless you have a dongle
(required for Enterprise Edition). If you have a dongle, check the Dongle Driver Software
component for installation, then click Next.
ProxiPen and WinDAU Installation Manual
10
17. Click Next to select the default Program Folder.
18.
19.
Click Next on the Start Copying Files screen.
During the installation process, the following screen will appear:
ProxiPen and WinDAU Installation Manual
11
Select Yes and follow steps detailed in Step A if you have a Hasp dongle OR
Select No and continue to Step 20, if you have a Hardlock dongle or no dongle.
NOTE: Dongles are required to run WinDAU Enterprise Edition. If you do not know if you are
using WinDAU Enterprise Edition, please contact your security, purchasing or network
director/administrator for verification.
NOTE: Manufacturer name (Hasp or Hardlock) can be found on the dongle itself.
A. Click Next on the Hasp Welcome screen.
B. Click Finish on the Hasp Finish screen.
Table des matières
