Menu Settings
Press the Menu button to get into the menu settings. You can navigate the settings menu by using
the Up/Down buttons. To change or edit a selected setting, press the OK button.
Press the menu button again to get out of the menu settings.
USB Mode
When connecting a USB cable with a PC, the DVR will present two options. ‘Open USB Storage
Device’ allows you to transfer your videos and photos to your PC. Charge mode simply charges your
DVR.
Battery Instructions
The DVR takes about 4 hours to fully charge.
The DVR can be charged multiple ways:
1. Using the provided micro USB cable to connect to a USB interface for charging.
2. Using the provided car charger. This is recommended to be used at all times as the internal
battery holds only a small charge to retain time and date information.
Menu setting features explained (Video Settings)
Resolution: The recommended resolution should be set at ‘1080P’ in order to get the best quality
footage.
Dual Recording:Turn on to allow for recording of both DVR and reverse camera simultaneously
when reverse camera is attached.
Loop recording: This feature allows you to set the size of the files your DVR will record before
saving and creating a new file. We recommend the DVR to be set to ‘3’ minute files.
HDR (High Dynamic Range): High Dynamic Range can allow for better quality footage in areas
where both bright light and no light are present.
Exposure: This feature will change the white input. We recommend it always be set at ‘+0.0’.
Record Audio: This Feature will allow you to turn the DVRs recording sound on or off. If you want
to stop the DVR recording sound in the cab of your vehicle, set this feature to ‘off’.
Date Stamp: This feature will stamp the date and time on all your footage produced by your DVR.
G Sensor: This feature allows you to set the sensitivity of the Gravity sensor in the DVR. We
recommend this be set to ‘Medium’ to help stop false or irrelevant readings.
Menu setting features explained (Tools Settings)
Date/Time: This feature will allow you to change the year, month, day and time. To change the
date, use the arrow keys on the highlighted square starting with year. Then press the OK/Lock(SOS)
button to move to the next date. Once finished, simply press the Menu button to save it.
