GAS BreathSpec Manuel d'instructions
Quickstart Manual
BreathSpec®
G.A.S. Gesellschaft für
analytische Sensorsysteme mbH
BreathSpec® –Quickstart Manual
2/67
Version 1.01, February 2021
Valid from BreathSpec® Firmware Version 4.00
All data, texts, designs, images and other elements used in this user manual are
protected by copyright law. Any infringement may be subject to legal action.
Passing it on to third parties and producing copies of any kind or form –on the whole
or in parts - is not permitted without written agreement of G.A.S. Any infringement
may be subject to legal action.
G.A.S. reserves the right to realize technical changes to the product without explicitly
mentioning them.
BreathSpec® is a registered trademark. Any infringement may be subject to legal
actions.
The BreathSpec® does not have a medical approval.
CE-Marking according to:
International Standard EN ISO 17050-1:2004
Directive 2014/35/EU (Low voltage directive);
Directive 2014/30/EU (Electromagnetic compatibility);
Directive 2011/65/EU (RoHS);
Directive 2012/19/EU on waste disposal (Waste Electrical and Electronic
Equipment –WEEE)
© Copyright 2020
G.A.S. Gesellschaft für analytische Sensorsysteme mbH
44227 Dortmund - Germany
All Rights Reserved.
G.A.S. Gesellschaft für analytische Sensorsysteme mbH
Otto-Hahn-Str. 15
D-44227 Dortmund
Germany
Phone: (+49) 231/9742-6550
Fax.: (+49) 231/9742-6555
Internet: www.gas-dortmund.de
BreathSpec® –Quickstart Manual
3/67
Table of Content
1General Information ............................................................................................. 5
1.1 Information about the Manual........................................................................ 5
1.2 Explanation of Symbols................................................................................. 5
1.3 Notation for dialogs, elements and references .............................................. 6
1.4 Scope of Supply BreathSpec® with Circular Gas Flow Unit (Version 4G1)... 7
1.5 Scope of Supply Special edition BreathSpec with Airsense µTD Unit (Version
4G2) 12
1.6 Liability and Guarantee................................................................................ 16
1.7 Copyright..................................................................................................... 17
1.8 Return and Disposal.................................................................................... 17
1.9 Software Updates........................................................................................ 17
1.10 Customer Service........................................................................................ 17
2Safety................................................................................................................. 18
2.1 Intended Use Only....................................................................................... 18
2.2 Responsibility of Operator........................................................................... 18
2.3 Requirements of Personnel......................................................................... 19
2.4 Dangers....................................................................................................... 20
3Transport, Packing and Storage ........................................................................ 21
3.1 Inspection after Transport............................................................................ 21
4Packing.............................................................................................................. 21
4.1 Storage and Transport................................................................................. 21
4.2 Cleaning and Maintenance.......................................................................... 22
4.3 Cleaning...................................................................................................... 22
4.4 Maintenance................................................................................................ 22
5Installation BreathSpec® Device (Version 4G1) with Ciruclar Gas Flow Unit
(CGFU)..................................................................................................................... 24
5.1 Installation Requirements............................................................................ 24
5.2 Installing the device..................................................................................... 25
5.3 Mounting the Mouthpiece holder................................................................. 29
5.4 Connecting the Mouthpiece tube................................................................. 30
5.5 Installation of Luer-Lock adapter [optional].................................................. 34
5.6 Prepare the device for operation ................................................................. 38
BreathSpec® –Quickstart Manual
4/67
6Installation BreathSpec® Device (Version 4G2) with Airsense µTD .................. 42
6.1 Installation Requirements............................................................................ 42
6.2 Installing the device..................................................................................... 43
6.3 Prepare the device for operation ................................................................. 49
7System Operation .............................................................................................. 53
7.1 Measurement Reqiurements....................................................................... 53
7.2 Measurement Program................................................................................ 53
7.3 Workflow: Breath Sampling via Handheld Breath Sampler.......................... 54
7.3.1 Workflow: Installation of Disposable Reservoir Tube and Mouthpiece.. 54
7.3.2 Workflow: Execute a breath measurement using the Handheld ........... 55
7.4 Workflow: Breath Sampling via Disposable Breath Sampler ....................... 58
7.4.1 Start a breath measurement using disposable breath sampler............. 58
7.5 Workflow: Exemplary Breath sampling with a sample bag.......................... 61
7.6 Workflow: Measurement in ID Input Mode................................................... 63
8Appendix............................................................................................................ 65
8.1.1 IMS-Spectrum Examples ...................................................................... 65
8.2 Corresponding G.A.S. Documents and Tutorials......................................... 67
BreathSpec® –Quickstart Manual
5/67
1 General Information
1.1 Information about the Manual
INFORMATION!
This Quickstart User Manual is an excerpt of the most important
information for installation and initial setup from the User Manual. It
is an addition to the User Manual and does not replace the User
Manual.
This manual describes a safe and adequate handling of the device. Following the
instructions of the indicated safety aspects and instructions as well as the national
and/or local rules and general safety regulations concerning the prevention of
accidents are absolutely imperative.
Before starting the work with the device read the manual completely and thoroughly
particularly the chapter security and respective safety references. Assure that you/the
operator comprehend the terms described.
The manual is part of the device. It must be stored together with and next to the
device at any time.
INFORMATION!
The graphics in this user manual are schematic and may differ from
the actual conditions. The firmware and PC software screenshots in
this user manual may differ from the actual conditions.
1.2 Explanation of Symbols
Important and safety-relevant references in this manual are characterized by
symbols. These indications which are in-line with industrial safety must be respected
and followed at any time.
INFORMATION
This symbol calls information, which are to be considered for
efficient and perfect handling of the equipment.
WARNING
This symbol indicates references, which can lead to damages,
malfunctioning and/or loss of the device.
BreathSpec® –Quickstart Manual
6/67
DANGER
This symbol marks references, which can lead to health
impairments, injuries, lasting body damages or to death due to
electric current.
DANGER
This Symbol marks paragraphs, which describe potential dangers and
damage due to exposure to radioactive radiation.
DANGER
This symbol marks references, which describe working procedures
that demand special attention to avoid spreading of biohazard
WARNING
This symbol marks references, which can lead to health impairments,
injuries due to pinching.
1.3 Notation for dialogs, elements and references
Example Dialog:
System › Connections › LAN File Transfer › Settings… › Test Connection
Example Elements:
Gas Out, Sample gas in
Example: References
Advanced User Manual, Chapter 5.1 Installation Reguirements
Example: Information
keep the transport box
BreathSpec® –Quickstart Manual
7/67
1.4 Scope of Supply BreathSpec® with Circular Gas Flow Unit
(Version 4G1)
Assure that you have received the full scope of supply. If there is any part missing,
please contact the GAS-hotline immediately.
Standard Scope of Supply
BreathSpec® Device (1 piece)
including connected Circular Gas Flow Unit
(CGFU) (1 piece)
Power supply with power plug (1 piece)
Mouthpiece Handheld holder arm with
screws
BreathSpec® –Quickstart Manual
8/67
Mouthpiece Handheld with
heatable Transferline
BreathSpec® Gas tube Kit (installed)
•Driftgas/Carriergas Adapter (1 piece)
•0,6 m 3mm PFA Tubes with 3 mm
Swagelok-Connector (2 pieces)
CGFU Connection cable (installed) (1 piece)
LAN Cable (1 piece)
BreathSpec® –Quickstart Manual
9/67
Luer-Lock Adapter-Kit
•Luer-Lock Adapter (1 piece)
•Luer-Lock Adapter Heater (1 piece)
Disposable Breath Reservoir Kit
•Mouthpieces (100 pieces)
•Reservoir tube (100 pieces)
Inner Syringe Body (2ml syringe) (50 pieces)
Sampling Syringe (5ml syringe) (100 pieces)
BreathSpec® –Quickstart Manual
10/67
BreathSpec® Blind plug Set (5 pieces)
(Swagelok 3mm Blind plug with red cap
installed on device connectors)
Torx Tool Kit
•Torx Srewdriver 8 mm (1 piece)
•Torx Srewdriver 10 mm (1 piece)
•Torx Srewdriver 30 mm (1 piece)
Document Map with Documents and Device
User Manuals
USB-Stick Box with Software und Documents
(1 piece)
Autres manuels pour BreathSpec
1
Table des matières
Autres manuels GAS Instrument analytique
Manuels Instrument analytique populaires d'autres marques
EXTOL PREMIUM
EXTOL PREMIUM 8820043 Instructions d'installation et d'utilisation
RIDGID
RIDGID SeeSnake Compact Manuel utilisateur
Teledyne
Teledyne 3000PA Manuel utilisateur
YDLIDAR
YDLIDAR TIA Manuel utilisateur
Olympus
Olympus IPLEX FX Series Manuel utilisateur
Bosch
Bosch GLM 50 C Professional Manuel utilisateur
