Garner PD-5 Manuel utilisateur

PD-5 Operator Manual

Model PD-5

(Physical Hard Drive Destroyer)

Operator Manual

10620 Industrial Ave. Suite 100

Roseville CA 95678

USA

(916) 784-0200

(800) 624-1903

4075-411L Operation Manual

PD-5 Operator Manual

Table of Contents

Introduction.............................................................................................................................................................. 2

Important Instructions.............................................................................................................................................. 2

Inspection................................................................................................................................................................ 2

Installation ............................................................................................................................................................... 2

Voltage................................................................................................................................................................. 2

Power Plug .......................................................................................................................................................... 2

Location ............................................................................................................................................................... 2

Operating Environment ....................................................................................................................................... 2

PD-5 Component Description................................................................................................................................. 3

Front Panel Identification..................................................................................................................................... 3

Front Panel Description....................................................................................................................................... 3

Inside Component Identification.......................................................................................................................... 3

Inside Component Description............................................................................................................................ 3

Operation................................................................................................................................................................. 4

Single Button Operation ...................................................................................................................................... 4

Display Messages ............................................................................................................................................... 4

Hard Drive Destruction........................................................................................................................................ 5

Multiple Hard Drive Destruction .......................................................................................................................... 6

Solid State Drive Destruction Using the Optional SSD-1 ................................................................................... 7

Cleaning exterior of unit ...................................................................................................................................... 8

Cleaning the Debris Tray..................................................................................................................................... 8

Specifications .......................................................................................................................................................... 9

Warranty................................................................................................................................................................ 10

WARNING............................................................................................................................................................. 11

FCC NOTICE ........................................................................................................................................................ 11

DECLARATION OF CONFORMITY..................................................................................................................... 12

PD-5 Operator Manual Page 2

Introduction

The Garner model PD-5 will physically destroy working and non-working hard disk drives (HDD), Network HDD,

Half-Height HDD, Standard HDD and Laptop HDD by bending, breaking and mangling data platters, pc boards

and the frames of the hard drives.

The PD-5 is also designed to destroy solid state memory devises when used with the optional SSD Destroyer

accessory.

Important Instructions

PLEASE READ THIS INFORMATION

BEFORE USING MODEL PD-5 !

This shipment was packaged and delivered to the carrier with utmost care to ensure safe delivery of goods to you,

our valued customer. In the event that you must transport your PD-5 to a different location or to the factory for

repair service, you must package it for safe delivery. Failure to do so may result in freight damage and void

warranty. PLEASE RETAIN ALL SHIPPING MATERIALS FOR FUTURE USE. Please contact Garner

Products, Inc. at (800) 624-1903 for further information if required.

Inspection

1) Unpack the shipping carton/case and take out the PD-5 Physical Destroyer.

2) Inspect the PD-5 for shipping damage as soon as it is unpacked. If the PD-5 or any accessories are

damaged or fail to operate correctly, notify carrier and contact your dealer immediately.

3) Retain all shipping materials for possible future use.

Installation

Voltage

Confirm power requirements as indicated on label located on back of the PD-5. If the identified voltage does not

match your voltage mains, contact Garner Products, Inc. at (800) 624-1903 for further instructions.

Power Plug

Plug the IEC connector attached to the power cord supplied into the receptacle on the back of the unit.

Location

The PD-5 must be place on a flat, hard and secure horizontal surface. Position the PD-5 to allow proper air flow

from the side air inlets and the rear exhaust. A minimum clearance of 6 inches from any obstructing wall or solid

surface is recommended.

Operating Environment

Do not use or keep the PD-5 in environments with excessive heat, cold, humidity, or dust.

PD-5 Operator Manual Page 3

Use caution when bringing the PD-5 from a cold environment into a warm environment. If moisture has

accumulated due to a sudden change of temperature, wait (1) hour until moisture has completely dissipated

before operating the PD-5.

PD-5 Component Description

Front Panel Identification

Front Panel Description

1) Power Button Applies power to the PD-5.

2) LCD Display 32 Character LCD Display with counter for Session and Total.

3) Destroy Button Initiates the destruction function.

4) Door/Door Handle

Prevents access to the HDD and destruction wedge during the destruction

process. If opened during the destruction process, the destruction wedge will

automatically stop. When the door is closed, the destruction wedge will return

to its home position.

Inside Component Identification

Inside Component Description

1) Destruction Wedge The Destruction Wedge pushes down on the hard drive(s) bending and

breaking the external and internal components, rendering the hard drive

inoperable.

2) Hard Drives Image shows the proper location of two 1” hard drives stacked on top of each

other. Note: Hard drives are centered between the two Support Rails.

3) Support Rails Supports and aligns the hard drive(s).

4) Debris Tray Removable tray helps collect hard drive debris caused by the destruction

process. The Debris Tray can be easily lifted out and emptied.

PD-5 Operator Manual Page 4

Operation

Single Button Operation

1) Press the “Power” button. The LCD display will go through a start sequence which will display

manufacturer information, software version, total number of cycles and then a ready screen. The

destruction wedge returns to home position.

2) Open door (The LCD display will show “Door Open”) and place the hard drive(s) on the Support Rails.

Note: Center the hard drive between right and left Support Rails and ensure the hard drive(s) are

positioned towards the back (Laptop drives can be oriented perpendicular to the standard drive orientation

to mount on both support rails).

3) Shut the door. The LCD will display “Ready Session = 0”.

4) Press the “Destroy” button. The PD-5 will destroy the media in the destruction chamber and return to the

home position, ready to destroy the next piece of media.

5) Open the door and remove the hard drive(s) when the LCD displays “Ready Session: 1”, indicating the

destruction process is complete and a cycle has been recorded.

6) Repeat Steps 2-5 until the job is complete.

Display Messages

Action LCD Display Description

Step 1:

Press on/off

Button

GARNER

PRODUCTS, INC.

Displays Manufacturer.

Garner Products

PD-5 Crusher

Displays Destroyer Model.

FIRMWARE VER

Displays current firmware

version.

Total Count

# −− ##

Displays total erasing cycles.

Number on left indicates

number of times the counter

reached 50,000.

Ready

Session = 0

Ready for media to be placed

in the destruction chamber.

Counter for erase cycles from

power up.

Step 2:

Insert media

Step 3:

Press

“Destroy”

Door Open

Indicates media safety door is

open – this is normal when

inserting media to be

destroyed.

Finding Media

Destroy cycle has started.

Media Found

> CRUSHING <

PD-5 switches from high

speed to high torque to crush

media.

MAX FORCE

PD-5 has used maximum

force and will stop and return

to home.

Going Home

Indicates PD-5 is returning to

home position (Wedge at

MAX height).

PD-5 Operator Manual Page 5

Step 4: Ready

Session = 1

Destroy cycle is complete.

Open door and remove

media.

Periodic

Maintenance: Service Required

See Operator’s Manual

Every 10,000 cycles, the

PD-5 requires service. See

Technical and Maintenance

Manual for details

Hard Drive Destruction

The PD-5 is designed to destroy many different formats of hard drives including: laptop drives, standard 1” drives,

and 1.5” drives.

To destroy hard drives:

1) Press Power button.

2) Remove mounting hardware from hard drive that would cause the media door not to close.

3) Lift door, and insert hard drive into PD-5.

4) Close door and press the “Destroy” button to activate destruction cycle. Note: Each hard drive requires

only one cycle to destroy. Pressing the destroy button with an already broken or damaged hard drive in

the crush chamber may wedge hard drive debris making it difficult to remove the hard drive.

5) Open Door and remove the crushed hard drive(s).

PD-5 Operator Manual Page 6

Multiple Hard Drive Destruction

The most efficient way of destroying hard drives is to destroy multiple hard drives at one time. The PD-5 is

designed to destroy up to (8) laptop drives or up to (2) standard 1” drives at one time. The actual capacity of

multiple hard drive destruction depends on the height and physical construction of each hard drive model. If the

PD-5 fails to crush multiple drives at one time, reduce the number of hard drives until complete destruction is

achieved.

Single Hard Drive Destruction

Multiple Hard Drive Destruction

(Note that the image on the left is

of 8 laptop hard drives loaded

perpendicular to the support rails)

PD-5 Operator Manual Page 7

Solid State Drive Destruction Using the Optional SSD-1

1) Lift door, and insert SSD-1 solid state destroyer into PD-5

2) Place SSD’s, USB drives, compact flash disks, cameras, hard drive controller boards and cell phones

(REMOVE BATTERY FIRST) in between the panels of the SSD Media Transport Sleeve and slide the

sleeve into the opening within the SSD Destroyer. Note: It is important to center the media from

front-to-back and side-to-side inside the SSD.

3) Close the door and press the “Destroy” button. The PD-5 and the SSD Destroyer will destroy the

media and return to home position to be ready to destroy the next piece of media.

4) Open the door and remove the media by gripping the end of the SSD Media Transport Sleeve. The

SSD Media Transport Sleeve is tough and designed for multiple cycles. The LCD displays “Ready

Session: 1”, indicating the destruction process is complete and a cycle has been recorded. Remove

PD-5 Operator Manual Page 8

SSD destroyer if desired.

Cleaning exterior of unit

When cleaning the unit, make sure that the power is not connected.

Wipe dirt off with a soft and dry cloth.

Do not use chemicals or solvents.

Note: Use caution when cleaning the unit as some debris is sharp and may contain glass.

Cleaning the Debris Tray

1) Make sure destruction wedge has returned to the top or home position. Wait for motor to stop.

2) Open Door.

3) Sweep debris from side rails into Debris Tray.

4) Lift and remove Debris Tray.

5) Empty Debris Tray into trash container.

6) Check bottom of crush chamber for additional debris.

If additional debris is found use a small brush to move additional debris to the front

of the destruction chamber. There are two holes that allow debris to be swept out

of the floor of the destruction chamber. Note: Placing the Debris Tray under the

front of the PD-5 will catch the debris as it falls from the two holes in the front of the

destruction chamber. (See “Cleaning Tips” below).

7) Replace the Debris Tray and resume the destruction process.

Note: Make sure that the Debris Tray is inserted all the way to the back of the chamber or the door will not

shut completely.

Cleaning Tip: You can use the debris tray itself to clear remaining debris from the bottom of the PD-5 as

demonstrated in the images below.

PD-5 Operator Manual Page 9

Specifications

Power Supply Standard Factory Setting: 120V ±5% 50/60 Hz

Field Selectable: (100-240V) (50 or 60 Hz)

Power Consumption 1.5A Operating, 7A MAX @ 120VAC

Cycle Time PD-5 Standard Model Full Cycle: ~ 20 seconds

Destroy Cycle: ~ 10 seconds

PD-5 Standard Model Capacity 2.5" and 3.5" Hard Drives.

Disk drives up to 1.66" high.

Two 1” high standard hard disk drives.

Up to eight laptop hard disk drives.

Operating Environment 41°F - 104°F (5°C - 40°C), Humidity: 10 to 80%

(Non-Condensing)

Physical Weight PD-5: Net 72 lbs. (32.66Kg)

Case: 23 lbs. (10.43 Kg)

Shipping Weight 82 lbs. (37.19 Kg)

Physical Dimensions

PD-5: 18.0 in. (L) x 7.0 in. (W) x 14.5 in. (H)

Case: 17 in. (W) x 24.5 in. (L) x22.5 in. (H)

Shipping Dimensions 24 in. (L) x 12 in. (W) x 20 in. (H)

Warranty 1 Year Parts and Labor Limited Warranty

Duty Cycle Continuous*

Noise The maximum continuous noise is 71.7 dB(A)

* Ambient temperatures above 75 degrees F will have an effect on duty cycle.

10620 Industrial Ave. Suite 100

Roseville CA 95678

(916) 784-0200

(800) 624-1903

www.garner-products.com

Autres manuels pour PD-5

Table des matières

Autres manuels Garner destructeur de papier

Garner

Garner FLASHPRO Manuel utilisateur

Garner

Garner PD-5 Manuel utilisateur

Manuels destructeur de papier populaires d'autres marques

Swingline

Swingline STACK-AND-SHRED200X&200XL 60X Mode d’emploi

GBC

GBC ShredMaster CC055 Manuel utilisateur

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Manuel utilisateur

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Manuel utilisateur

Rexel

Rexel Optimum AutoFeed+ 45X Manuel utilisateur

Martin Yale

Martin Yale 227284S1 Manuel utilisateur

Bonsaii

Bonsaii DocShred C223-A Manuel utilisateur

HSM

HSM Pure 740 max Manuel utilisateur

TRU RED

TRU RED TR-BMC20A Manuel utilisateur

Fellowes

Fellowes 50S Manuel utilisateur

GBC

GBC SHREDMASTER 1236SE Manuel utilisateur

Gude

Gude GH 2600 P Manuel utilisateur

Ativa

Ativa DQ80M Manuel utilisateur

Q-Connect

Q-Connect Q8CC Manuel utilisateur

Fellowes

Fellowes POWERSHRED C-325CI Manuel utilisateur

Olivetti

Olivetti Privacy 5000C Guide de démarrage rapide

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Manuel utilisateur

Dahle

Dahle paperSAFE 22022 Manuel utilisateur