Garmin ETrex 10 Manuel utilisateur

eTrex® 10

quick start manual

2 eTrex10QuickStartManual



‹



See the Important Safety and Product

Information guide in the product

box for product warnings and other

important information.

When using your device the rst time,

you should complete these tasks to set

up the device and get to know the basic

features.

1. Install the batteries (page 3).

2. Turn on the device (page 4).

3. Register the device (page 4).

4. Acquire satellites (page 4).

5. Mark a waypoint (page 5).

6. Create a route (page 6).

7. Record a track (page 7).



➊

➎

➍➌

➋

➊

Zoom keys

➋

Back key

➌

Thumb Stick

™

➍

Menu key

➎

Power and backlight key

eTrex10QuickStartManual 3

➏

➒

➑

➐

➏

Mini-USB port (under weather cap)

➐

Battery cover

➑

Battery cover locking ring

➒

Mounting spine



‹



The temperature rating for the device

(-4°F to 158°F, or -20°C to 70°C)

may exceed the usable range of some

batteries. Alkaline batteries can rupture

at high temperatures.

notice

Alkaline batteries lose a signicant

amount of their capacity as temperature

decreases. Therefore, use lithium

batteries when operating the device in

below-freezing conditions.

The device operates on two AA

batteries.



You can use alkaline, NiMH, or

lithium batteries. Use NiMH or lithium

batteries for best results.

1. Turn the D-ring counter-clockwise,

and pull up to remove the cover.

4 eTrex10QuickStartManual

2. Insert the batteries, observing

polarity.

3. Replace the battery cover, and turn

the D-ring clockwise.

4. Hold (page 2).

5. Select  >  > 

.

6. Select , , or

.





Hold (page 2).



• Go to http://my.garmin.com.

• Keep the original sales receipt, or a

photocopy, in a safe place.



After the device is turned on, it begins

acquiring satellite signals. The device

may need a clear view of the sky to

acquire satellite signals. When the

GPS bars on the backlight page

(page 5) are solid, your device has

acquired satellite signals. The time and

date are set automatically based on the

GPS position.

For more information about GPS, go to

www.garmin.com/aboutGPS.

eTrex10QuickStartManual 5



: The backlight brightness may

be limited when the remaining capacity

in the batteries is low.

Extensive use of screen backlighting

can signicantly reduce battery life.

1. While the device is on, press .

2. Move the Thumb Stick left and

right to adjust the brightness level.



Proles are a collection of settings that

optimize your device based on how

you are using it. For example, your

settings and views can be different

when you are using the device for

geocaching and for navigating on

water.

1. Select .

2. Select a prole.



Waypoints are locations you record and

store in the device.



You can save your current location as

a waypoint.

1. Select .

2. Select an option:

• To save the waypoint without

changes, select .

• To make changes to the

waypoint, select an attribute,

make changes to the attribute,

and select .



1. Select  > .

2. Select a waypoint.

3. Select .

6 eTrex10QuickStartManual





Waypoint averaging allows you to

increase the accuracy of a waypoint

location by collecting multiple samples

of the waypoint location.

1. Select .

2. Select a waypoint.

3. Move to the location.

4. Select .

5. When the Sample Condence status

bar reaches 100%, select .

For best results, collect four to

eight samples for the waypoint,

waiting at least 90 minutes between

samples.



You can use the Where To? menu to

nd a destination to navigate to. Not all

Where To? categories are available in

all areas and maps.



A route is a sequence of waypoints that

leads you to your nal destination.

1. Select   > 

 > .

2. Select a category.

3. Select the rst point in the route.

4. Select .

5. Repeat steps 2–4 until the route is

complete.

6. Select  to save the route.

eTrex10QuickStartManual 7



A track is a recording of your path.

The track log contains information

about points along the recorded path,

including time, location, and elevation

for each point.



1. Select  >  > 

.

2. Select ,  or

, .

If you select , 

, a line on the map indicates

your track.

3. Select .

4. Select an option:

• To record tracks at a variable

rate that creates an optimum

representation of your tracks,

select .

• To record tracks at a specied

distance, select .

• To record tracks at a specied

time, select .

5. Select  .

6. Complete an action:

• Select an option to record tracks

more or less often.

: Using the 

interval provides the most track

detail, but lls up the device

memory quicker. Use this

setting only if you require a

very precise track record.

• Enter a time or distance, and

select .

As you move with the device turned

on, a track log is created.

8 eTrex10QuickStartManual





You can navigate to a destination using

the map.

1. Select .

2. Select a category.

3. Select a destination.

4. Select .

The map page opens with your

route marked with a magenta line.

5. Navigate using the map (page 8).



1. Select .

The position icon represents your

location on the map. As you travel,

the position icon moves.

2. Complete one or more actions:

• Use the Thumb Stick to move

the map to different areas.

• Select ▲ and ▼ to zoom in and

out of the map.

: To customize the map view, select

 > , and adjust the

settings.





1. Connect the USB cable to a USB

port on your computer.

2. Pull up the weather cap from the

mini-USB port.

3. Plug the small end of the USB

cable into the mini-USB port.

Your device appears as removable

drives in My Computer on Windows

computers and as a mounted volume on

Mac computers.

eTrex10QuickStartManual 9



1. Connect your device to a computer

(page 8).

2. Go to www.opencaching.com.

3. If necessary, create an account.

4. Sign in.

5. Follow the on-screen instructions

to nd and download geocaches to

your device.





If the device stops responding, you can

reset the device.

1. Remove the batteries.

2. Reinstall the batteries (page 3).

: This does not erase any of your

data or settings.



You can download the latest version of

the owner’s manual from www.garmin

.com.



Optional accessories, such as mounts,

maps, and replacement parts, are

available at http://buy.garmin.com or

from your Garmin dealer.





• Go to www.garmin.com/support

and click  for

in-country support information.

• In the USA, call (913) 397.8200 or

(800) 800.1020.

• In the UK, call 0808 2380000.

• In Europe, call +44 (0)

870.8501241.

Autres manuels pour eTrex 10

Table des matières

Autres manuels Garmin GPS

Garmin

Garmin eTrex HC series Manuel utilisateur

Garmin

Garmin G1000 Columbia 350 Manuel utilisateur

Garmin

Garmin GPSMAP 67 Manuel d'instructions

Garmin

Garmin GPSMAP 295 Manuel utilisateur

Garmin

Garmin GPS 19x NMEA 0183 Manuel utilisateur

Garmin

Garmin DAKOTA 10 Manuel utilisateur

Garmin

Garmin APPROACH G80 Manuel d'instructions

Garmin

Garmin RV 895 Manuel utilisateur

Garmin

Garmin iQUE M5 Guide de l'utilisateur

Garmin

Garmin APOLLO GX 55 Manuel utilisateur

Garmin

Garmin Cessna Caravan G1000 Manuel utilisateur

Garmin

Garmin 400W Series Manuel utilisateur

Garmin

Garmin Apollo SL50 Manuel utilisateur

Garmin

Garmin GTN 625 Manuel

Garmin

Garmin Drivesmart 55 Manuel utilisateur

Garmin

Garmin GPS 500 Manuel utilisateur

Garmin

Garmin zumo 590LM Manuel utilisateur

Garmin

Garmin Cirrus Perspective SR20 Manuel utilisateur

Garmin

Garmin nuvi 140 series Manuel utilisateur

Garmin

Garmin cf Que 1620 Guide de référence

Garmin

Garmin GPS 400 Manuel utilisateur

Garmin

Garmin GPS 17 Series Manuel utilisateur

Garmin

Garmin aera 560 Manuel

Garmin

Garmin GPSMAP 180 Manuel utilisateur

Manuels GPS populaires d'autres marques

Raven

Raven Cruizer II Manuel

Hama

Hama 53118 Manuel utilisateur

Jigabot

Jigabot EX Manuel utilisateur

Pointer

Pointer Cellocator CelloTrack XT LTE Guide d'installation

Queclink

Queclink GV55LITE Manuel utilisateur

Voxson

Voxson Voxtrack GPS500 Manuel d'instructions

Starcom Systems

Starcom Systems Kylos Compact Manuel utilisateur

Cobra

Cobra Marine MC 600Ci Manuel utilisateur

Cellocator

Cellocator CelloTrack T Manuel utilisateur

Enfora

Enfora Mini-MT GSM2228UG001 Manuel utilisateur

Magellan

Magellan eXplorist 100 Manuel utilisateur

LTE

LTE G50B Manuel utilisateur

SkyGolf

SkyGolf SkyCaddie SG1 Manuel utilisateur

Kenwood

Kenwood DNN9330BT Manuel utilisateur

Safelet

Safelet Indra Manuel utilisateur

Bushnell

Bushnell 360100 Manuel utilisateur

Geneq

Geneq SXBlue Manuel utilisateur

ORIGO

ORIGO ED308 Manuel utilisateur

Garmin eTrex 10 Manuel utilisateur

Manuels GPS populaires d'autres marques