Garmin Apollo 360 Manuel utilisateur

Apollo 360 GPS Receiver

Quick Reference Guide

Use this Quick Reference Guide to quickly review:

How to use the eight navigation screens, with special information on:

Moving maps Zoom feature

Creating and editing routes

How to GOTO any waypoint using the GOTO/NRST key

How to GOTO a nearest waypoint using the GOTO/NRST key

How to get extra waypoint information using the INFO key

How to create custom waypoints with the WPT key

How to use features available with the MENU key

First Power Up

The first time the Apollo 360 GPS is powered on, it will need to know

the approximate time, date, latitude, and longitude in order to look for

specific GPS satellites. Afterwards, the Apollo 360 GPS will remember

the last known position, and will update the current time automatically,

even when turned off. Setting up this information is done using the

Menu: Time and Place feature, and is fully described in the Users Guide

— Getting Started section.

P/N 561-0161-00 Copyright November 1996 II Morrow Inc.

Rev A

The eight navigation screens form the core of the Apollo 360 interface,

and are displayed whenever not accessing the MENU, GOTO/NRST,

WPT, or INFO functions. Rotate the LARGE knob to view each screen.

For full details refer to the User’s Guide — Chapter: Topic as indicated

below.

GPS satellite information

Rotate the SMALL knob to view individual

satellite information. Refer to Navigating a

Trip: GPS Signal Strength.

Current alert messages

Press the ENT key to view additional messages.

Refer to Navigating a Trip: Current Messages

Screen.

GPS altitude and lat/lon coordinates

Note that GPS altitude is not the same as

barometric altitude. Refer to Navigating a Trip:

Present Position Screen.

General navigation information (two screens)

Refer to Navigating a Trip: Bearing / ETA / Track

Screen and Bearing / Range / Ground Speed

Screen.

Moving maps (two screens)

The lower left corner of the moving maps shows

the current map Zoom scale, which is changed by

rotating the SMALL knob. The Auto Zoom scale

automatically zooms in on the TO waypoint as

you fly. Refer to the Navigating a Trip: Moving

Map sections, and Navigating a Trip: Zooming In

or Out and Auto Zoom sections.

Routes

Additional information for using routes is

provided on the next page. Refer to the Navigating

a Trip: Route subsections.

II Morrow Inc. Copyright November 1996 P/N 561-0161-00

Rev A

Using Routes

To edit a route, select the route screen. Rotate the SMALL knob to the

Edit option and press the ENT key. Rotate the SMALL knob to select

waypoint INSERT, CHANGE, or DELETE options, then press the ENT

key. Edit the waypoint using the LARGE and SMALL knobs, then press

the ENT key to save the waypoint in the route. When the route is

complete, select the DONE option and press the ENT key.

To activate and fly a route, select the route screen. Select the desired

route by pressing the ENT key when the NXT RTE option is selected.

Rotate the SMALL knob to select the START option, then press the

ENT key. Press ENT key again to start in forward order, or rotate the

SMALL knob to select the REVERSE route option, then press the ENT

key.

To enter a direct GOTO waypoint, press the

GOTO/NRST key once. Rotate the LARGE and

SMALL knobs to update the waypoint identifier

or data type. Press the ENT key to activate the

waypoint. Refer to Getting Started: Entering a

Destination Waypoint.

To search for nearest waypoints, press the

GOTO/NRST key twice. The nearest 30

waypoints will be displayed and can be selected

by rotating the LARGE knob. Press the ENT key

to GOTO the selected waypoint. Refer to

Navigating a Trip: Searching for Nearest

Waypoints.

To view waypoint information, press the INFO

key. When displaying navigation screens,

information is for the TO waypoint. When

viewing the GOTO or nearest waypoints or

editing a route, information is for the selected

waypoint. Rotate the LARGE knob to view

additional information. Press the INFO or ENT

keys to exit the Info screen. Refer to the User’s

Guide — Waypoint Database.

Create User waypoints at any time by pressing

the WPT key. Change the waypoint information

by rotating the LARGE and SMALL knobs. When

P/N 561-0161-00 Copyright November 1996 II Morrow Inc.

Rev A

complete, press the ENT key. Refer to Navigating

a Trip: Creating Waypoints.

The MENU key accesses the Main Menu, which

provides system setup information. While

viewing this screen, rotate the LARGE knob to

select a menu option, then press the ENT key to

view the option screen.

To return to the navigation screens at any time, press

the MENU key, then press the ENT key.

Refer to the Users Guide — Menu Function Options for detailed information.

Main Menu Options

Return To Nav: Return to the navigation screens

Operation Mode: Begin simulator operation, or select aviation

operation

Time and Place: Set the initial position, date, and time for the GPS

sensor the very first time you power up

Screen Controls: Change contrast and brightness settings

Map Setups: Choose moving map display options for airspaces,

route paths, and map orientation

Declutter Maps: Choose which types of waypoints are displayed on

the moving maps and in the nearest waypoints list

Track Point Hist: Choose whether a trail showing where you have

been is displayed on the moving maps

Arrival Alerts: Choose the waypoint arrival alert radius

Airspace Alerts: Choose the airspace alert options for distance and time

CDI Scale: Choose the full scale deflection value for the course

deviation indicator

Magnetic Var: Choose a magnetic variation: automatic, manual, or

true north

Countdown Time: Start a countdown timer to give an alert message

Display Units: Choose distance, altitude, and position units of

display for navigation

Serial Outputs: Use to select serial output interfaces including

moving map (NMC data format), NMEA, PC, and GPS data

User Wpt Mgmt: Modify or delete waypoints that were created

with the WPT feature

System Info 1: View current version information

System Info 2: View more current version information

II Morrow Inc. Copyright November 1996 P/N 561-0161-00

Rev A

Autres manuels pour Apollo 360

Table des matières

Autres manuels Garmin GPS

Garmin

Garmin Edge 810 Manuel d'instructions

Garmin

Garmin GPSMAP 620 Manuel utilisateur

Garmin

Garmin affordable car navigation Manuel utilisateur

Garmin

Garmin GPS 17x Manuel utilisateur

Garmin

Garmin GPSCOM 170 Manuel utilisateur

Garmin

Garmin Vivofit 2 Manuel utilisateur

Garmin

Garmin 205-Series Manuel utilisateur

Garmin

Garmin Montana 700i Manuel utilisateur

Garmin

Garmin GTX 3X5 Series Manuel

Garmin

Garmin maps plus more Manuel utilisateur

Garmin

Garmin 310 Manuel utilisateur

Garmin

Garmin ZUMO Zumo 400 Instructions de montage

Garmin

Garmin Nuvi 465 Manuel utilisateur

Garmin

Garmin nuvi 150T series Manuel d'instructions

Garmin

Garmin nuvi 3490 Manuel d'instructions

Garmin

Garmin Rino 120 Manuel utilisateur

Garmin

Garmin Beechcraft A36 Manuel

Garmin

Garmin GTN 625 Manuel utilisateur

Garmin

Garmin GMX 200 Manuel utilisateur

Garmin

Garmin ECHOMAP PLUS 60 series Manuel d'instructions

Garmin

Garmin GPSMAP 2008 Manuel utilisateur

Garmin

Garmin GPSMAP 76CS Manuel utilisateur

Garmin

Garmin ZUMO Zumo 400 Instructions de montage

Garmin

Garmin G500 Manuel

Manuels GPS populaires d'autres marques

Raven

Raven Cruizer II Manuel

Hama

Hama 53118 Manuel utilisateur

Jigabot

Jigabot EX Manuel utilisateur

Pointer

Pointer Cellocator CelloTrack XT LTE Guide d'installation

Queclink

Queclink GV55LITE Manuel utilisateur

Voxson

Voxson Voxtrack GPS500 Manuel d'instructions

Starcom Systems

Starcom Systems Kylos Compact Manuel utilisateur

Cobra

Cobra Marine MC 600Ci Manuel utilisateur

Cellocator

Cellocator CelloTrack T Manuel utilisateur

Enfora

Enfora Mini-MT GSM2228UG001 Manuel utilisateur

Magellan

Magellan eXplorist 100 Manuel utilisateur

LTE

LTE G50B Manuel utilisateur

SkyGolf

SkyGolf SkyCaddie SG1 Manuel utilisateur

Kenwood

Kenwood DNN9330BT Manuel utilisateur

Safelet

Safelet Indra Manuel utilisateur

Bushnell

Bushnell 360100 Manuel utilisateur

Geneq

Geneq SXBlue Manuel utilisateur

ORIGO

ORIGO ED308 Manuel utilisateur