G
17
G
16
5. Now replace the lamp:
Note: Do not touch the glass body of the halogen lamp with your
fingers as this can shorten the service life considerably.
6. Pay attention during the subsequent assembly that the seal is
pressed down until the limit stop is reached.
Spare parts are available as required from the GARDENA customer
service.
Trouble-Shooting or Defects
If you have any problems with your Indoor Fountain Lamp please
contact our Service or return the defective unit together with a
short description of the problem – in case of guarantee, with the
warranty card duly completed and signed – postage paid to one
of the GARDENA Service Centres listed on the back of this leaflet.
We expressly point out that, in accordance with the product
liability law, we are not liable for any damage caused by our
units if it is due to improper repair or if parts exchanged are not
original GARDENA parts or parts approved by us, and, if the
repairs were not carried out by a GARDENA Service Centre or
an authorised specialist. The same applies to spare parts and
accessories.
Product liability
Notes on Care
xCheck the plug-in connections of transformer output/lamp cable
at regular intervals of time for contamination and clean when
necessary.
xWater can condense and collect in the protective glass from long
periods of operation. Remove the protective glass. Clean the
lamp as well (➞refer to ”Replacing the lamp” for disassembly).
n
1. Pull the mains plug!
2. Take the lamp out of the water and wipe dry.
3. Carefully take the lamp out the hold.
4. Remove the protective glass. Hold the lamp firmly by its socket
and remove the protective glass from the rubber socket.
Only 12 V halogen lamps of max. 5 watts may be used!
Replacing the lamp
n
Do not use any corrosive or abrasive cleaning agents.
Contamination in the
protective glass
Checking plug-in
connections
