Gantner GL7p Guide rapide

www.gantner.com

HB_GL7p--EN_12

GL7p

Battery-Powered, Door-Mounted Electronic Locker Lock

Identification via RFID (MIFARE®, ISO 15693, NFC, HID iCLASS)

and Optional PIN Code

Installation, Configuration, Operation

Document Version 1.2

GL7p - Battery-powered, door-mounted electronic locker lock

HB_GL7p--EN_12

www.gantner.com

Operating instructions, manuals and software are protected by copyright. All rights are reserved. Copying, duplication, translation,

installation in any electronic medium or machine-readable form in whole or in part is prohibited. The sole exception is represented

by creation of a back-up copy of software for own use as a safeguard, so far as this is technically possible and recommended by us.

Any infringement will render the party committing such infringement liable to compensation payment.

Liability

Any claims against the manufacturer based on the hardware or software products described in this manual shall depend exclusively

on the conditions of the guarantee. Any further-reaching claims are excluded, and in particular the manufacturer accepts no liability

for the completeness or accuracy of the contents of this manual. The right is reserved to make alterations, and alterations may be

made at any time without prior notice being given.

Trademarks

Attention is drawn at this point to markings and registered trademarks used in this manual. All product and company names, which

are mentioned in this manual, are only used for identification and explanation purposes. Some of these names may be trademarks

or registered trademarks of the corresponding company.

Availability

The GL7p is not available in North America (United States, Canada).

Contact

The contact information for questions regarding this product or for general enquiries is listed below:

Contact address of manufacturer

GANTNER Electronic GmbH

Bundesstraße 12

6714 Nüziders, Austria

www.gantner.com/locations

GL7p - Battery-powered, door-mounted electronic locker lock

www.gantner.com

HB_GL7p--EN_12

Important Information

Dear Customer,

Our aim is to ensure that our product operates with safety and to your complete satisfaction. To achieve this aim, please take

this opportunity to familiarize yourself with the following guidelines.

- Pay attention to the safety messages in this manual. The messages are indicated by the signal words "DANGER",

"WARNING", or "CAUTION", and inform you about hazardous situations and how to avoid them.

- Pay attention to messages indicated by the "NOTICE" signal word. These messages include important information for

avoiding property damage.

- Pay attention to the symbols and safety messages on the product.

- Read all instructions in this manual carefully before installing or operating the product.

- Where not otherwise specifically documented, the appropriate installation, commissioning, operation and maintenance of

the product is the customer’s responsibility.

- Keep this manual in a safe place for quick reference.

Notation of Safety Information and Safety Symbols

This manual includes important safety messages and symbols intended to inform the user about potentially hazardous situations

or important information for the safe and proper use of the described product(s). The safety messages also include directives on

how to avoid hazardous situations. These safety messages and directives must be read and observed.

The structure of the safety messages and the meaning of the symbols used in this manual are described in this section.

1. Safety Messages for Personal Injury

Personal safety messages contain a signal word, describe the nature of the hazard, and indicate how to avoid the hazard.

The safety alert symbol used without a signal word always precedes important safety information that must be read

carefully and the instructions carefully observed. Not doing so may cause personal injury.

Format of safety messages that apply to an entire section:

These safety messages may be used with or without a symbol.

Electrical shock

➔Touching current-conducting parts may result in injury due to electrical shock.

- Do not remove safety protection and covers.

- Do not touch the electrical connections while power is being supplied.

Format of safety messages that are embedded in text and apply to a specific point:

CAUTION! Electrical shock. Never remove safety protection and covers. Do not touch the electrical connections while

power is being supplied.

GL7p - Battery-powered, door-mounted electronic locker lock

HB_GL7p--EN_12

www.gantner.com

2. Property Damage Messages

Property damage messages are used to describe potentially hazardous situations that may lead to property damage. These

messages have the same layout as safety messages but use the signal word "NOTICE" instead of “CAUTION”.

Format of property damage messages that apply to an entire section:

Risk of damage to the device and connected devices

Risk of malfunction

- Read the following instructions carefully before installing the device.

- Always adhere to the instructions.

Format of property damage messages that are embedded in text and apply to a specific

point:

NOTE! Risk of damage to the device and connected devices. Read the following instructions carefully before installing the

device.

3. Definition of the Signal Words

Indicates a hazardous situation that, if not avoided, may result in minor or moderate injury.

Indicates information considered important, but not hazard-related (e.g., messages relating to

property damage).

4. Definition of the Safety Symbols

Caution: General Information

This symbol indicates general warnings or cautions that are not related to a particular type of hazard.

Caution: Electrical Shock

This symbol indicates warnings related to electrical hazards (danger due to high voltage).

Prohibited: Do Not Disassemble

This symbol indicates warnings about not disassembling certain components or equipment. Disassembling may

lead to damage or malfunction of the device.

Mandatory Action: General Information

This symbol indicates general information that must be read and followed before proceeding with the

accompanying instructions.

Mandatory Action: Read Instructions

This symbol indicates information referring to an important description in the manual, or other documentation,

which must be read and followed.

GL7p - Battery-powered, door-mounted electronic locker lock

www.gantner.com

HB_GL7p--EN_12

Important Safety Information

−The installation, commissioning, and servicing of our products must be performed only by suitably trained

personnel. In particular, electrical connections must only be made by correspondingly qualified specialists.

Always observe the relevant installation regulations in accordance with the national Electrical Engineers

Association.

➔Unqualified personnel may potentially perform actions that result in injury due to electrical shock.

−Where not otherwise stated, installation and maintenance work on our products must be carried out when

disconnected from the power supply. This applies in particular to appliances that are normally supplied by

low-voltage current.

➔If the appliance is not disconnected from power, touching terminals or other internal parts of the

appliance may lead to injury due to electrical shock.

−It is prohibited to alter the products (devices, cabling, etc.).

➔Alterations to the products may subsequently result in personal injury, property damage, or damage to

the products.

−Do not remove protective shields and covers.

➔Removing protective shields and covers may result in personal injury or property damage.

−Do not attempt to repair a product after a defect, failure, or damage is detected. In addition, do not put the

product back into operation. In such cases, it is essential to contact your GANTNER representative or the

GANTNER support hotline.

−The installation, commissioning, operation, and maintenance of the product must be carried out in

accordance with the technical conditions of operation as described in the corresponding documentation.

Therefore, it is essential to read the corresponding chapter of this manual and observe the instructions and

information therein.

−If there are still some points that are not entirely clear, please do not take a chance. All queries can be

clarified by your GANTNER representative or by ringing the GANTNER support hotline.

−Directly on receipt of the goods, inspect both the packaging and the product itself for any signs of damage.

Also check that the delivery is complete and includes all accessories, documentation, auxiliary devices,

etc.

−If the packaging or product has been damaged in transport, or should you suspect that it may have a fault,

the product must not be put into service. Contact your GANTNER representative who will endeavor to

resolve the problem as quickly as possible.

−GANTNER Electronic GmbH accepts no responsibility for any injuries or damage caused as a result of

improper use.

Although great care is taken and we are continuously aiming for improvement, we cannot completely exclude the possibility of

errors appearing in our documentation. GANTNER Electronic GmbH therefore accepts no responsibility for the completeness or

the accuracy of this manual. The right is reserved to make alterations at any time without prior notice.

Should you discover any fault with the product or in its accompanying documentation, or you have any suggestions for

improvement, you may confidently inform your GANTNER representative or GANTNER Electronic GmbH directly.

We especially look forward to hearing from you if you want to let us know that everything is functioning perfectly

GL7p - Battery-powered, door-mounted electronic locker lock

HB_GL7p--EN_12

www.gantner.com

The GL7p was developed and fabricated under the quality management standard ISO 9001 and GANTNER Electronic GmbH is

also certified according to standard ISO 14001.

This product is in conformity with the following EC directives, including all applicable amendments:

- 2014/53/EU (Radio Equipment Directive)

The complete text of the CE Declaration of Conformity is available on the following internet link:

http://www.gantner.com/en/produkte/downloads-GL7p_jQ690dP3B6

GANTNER is committed to meeting or exceeding the requirements of the RoHS directive (2011/65/EU). The RoHS

directive requires that manufacturers eliminate or minimize the use of lead, mercury, hexavalent chromium,

cadmium, polybrominated biphenyls and polybrominated diphenyl ethers in electrical and electronic equipment sold

in the EU after July 1, 2006.

FCC INFORMATION (U.S.A.)

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that of which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

FCC Warning Statement:

[Any] changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

Comliance Statement (GL7p.0500, GL7p.150x):

Compliance Statement (GL7p.2500, GL7p.350x):

The GL7p.2xxx and GL7p.3xxx contain a wireless module. For those modules the following applies:

FCC Radio Frequency Exposure:

WARNING: To comply with RF exposure limits the users must keep at least 20 cm separation distance from the

device, except during the identification and operation process at the device (e.g. PIN-code input), which must be

performed as described in this manual.

FCC ID: NC4-GEA1190118A

This device complies with Part 15 of the FCC Rules.

Operation is subject to thefollowing two conditions: (1) This

device must not cause harmful interference, and (2) this

device must accept any interference received, including

interference that may cause undesired operation.

FCC ID: NC4-GEA1190126A

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This

device must not cause harmful interference, and (2) this

device must accept any interference received, including

interference that may cause undesired operation.

This device contains

FCC ID: QWO-QS9322PLCS

IC: 4460A-QS9322PLCS

GL7p - Battery-powered, door-mounted electronic locker lock

www.gantner.com

HB_GL7p--EN_12

INDUSTRY CANADA INFORMATION

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development

Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.

2. This device must accept any interference, including interference that may cause undesired operation of the device.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et

Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux

conditions suivantes:

1. l’appareil ne doit pas produire de brouillage;

2. l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le

fonctionnement.

ICES Statement (Canada)

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Availability

The GL7p is not available in North America (United States, Canada).

The WEEE symbol on GANTNER products and their packaging indicates that the corresponding material must not

be disposed of with normal household waste. Instead such marked waste equipment must be disposed of by

handing it over to a designated electronic waste recycling facility. Separating and recycling this waste equipment at

the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects

human health and the environment. Please contact your local authority for further details of your nearest electronic

waste recycling facility.

GL7p - Battery-powered, door-mounted electronic locker lock GL7p

HB_GL7p--EN_12

www.gantner.com

GL7p - Battery-powered, door-mounted electronic locker lock GL7p 
Table of Contents 
 
www.gantner.com
 HB_GL7p--EN_12
 
9
 
TABLE OF CONTENTS 
 
1
 
INTRODUCTION ............................................................. 11
 
1 About this Manual...................................................................................................................................11 
2 Chapter Overview...................................................................................................................................11 
3 Contact & Inquiries .................................................................................................................................11 
4 Target Group...........................................................................................................................................12 
5 Formatting...............................................................................................................................................12 
5.1 Safety-Critical Information....................................................................................................................12 
5.2 Non-Safety-Critical Information............................................................................................................12 
5.3 Instructions and Results.......................................................................................................................12 
2
 
GENERAL INFORMATION............................................... 13
 
1 Intended Use...........................................................................................................................................13 
2 Highlights................................................................................................................................................13 
3 Functional Description ............................................................................................................................13 
4 GL7p Variants.........................................................................................................................................14 
4.1 RFID Technologies ..............................................................................................................................15 
4.2 Lock Orientation...................................................................................................................................15 
5 Terminology............................................................................................................................................16 
6 System Components ..............................................................................................................................17 
7 GL7p Dimensions and Components.......................................................................................................20 
3
 
INSTALLATION .............................................................. 21
 
1 Target Group...........................................................................................................................................21 
2 Test Installation.......................................................................................................................................21 
3 Replacement after a Burglary Attempt ...................................................................................................21 
4 Operating Conditions..............................................................................................................................21 
5 Door Width and Thickness......................................................................................................................22 
6 Latch Types ............................................................................................................................................22 
7 Definition of the Door Hinge (Right of Left-Hinged Door).......................................................................24 
8 Installation of the GL7p...........................................................................................................................26 
8.1 Mounting Holes in the Door..................................................................................................................26 
8.2 Instructions for Installing the GL7p.......................................................................................................27 
9 Attaching the Number Plate....................................................................................................................29 
4
 
COMMISSIONING ........................................................... 31
 
1 Target Group...........................................................................................................................................31 
2 Power Supply..........................................................................................................................................31 
2.1 Battery Information...............................................................................................................................31 
2.2 Inserting the Battery.............................................................................................................................31 
2.3 Replacing the Battery...........................................................................................................................32 
3 USB Connection .....................................................................................................................................33 
5
 
CONFIGURATION........................................................... 37
 
1 General Information................................................................................................................................37 
2 Configuration with GAT Config Manager................................................................................................37 
2.1 Setup for Configuration in GAT Config Manager.................................................................................37 
2.2 View and Edit the GL7p Configuration Settings...................................................................................39 
2.3 Upload Configuration Settings to the GAT ECO.Lock 7xxx F/ISO ......................................................40 
2.4 Updating the GL7p Firmware...............................................................................................................41 
3 Configuration with the MoLA App...........................................................................................................43 

GL7p - Battery-powered, door-mounted electronic locker lock GL7p 
Table of Contents 
 

HB_GL7p--EN_12 
www.gantner.com
 
4 Configuration Settings of the GL7p........................................................................................................ 44 
4.1 Operating Mode................................................................................................................................... 44 
4.2 Locker Number.................................................................................................................................... 44 
4.3 Auto-Unlock......................................................................................................................................... 44 
4.4 Duration of Use.................................................................................................................................... 45 
4.5 Locking of Personal Locker without Data Carrier................................................................................ 45 
4.6 RF Standards ...................................................................................................................................... 45 
4.7 MASTER Data Carriers....................................................................................................................... 46 
4.8 Wireless Interface................................................................................................................................ 46 
4.9 PIN-Code Keypad ............................................................................................................................... 46 
4.10Configuration Settings Table............................................................................................................... 47 
6
 
OPERATION ................................................................... 51
 
1 Target Group.......................................................................................................................................... 51 
2 General .................................................................................................................................................. 51 
3 Operating Modes.................................................................................................................................... 51 
3.1 Free Locker Mode (with or without Duration of Use Function)............................................................ 52 
3.2 Free Locker Universal Mode ............................................................................................................... 54 
3.3 Free Locker Unique Number Mode..................................................................................................... 55 
3.4 Personal Locker Programming Card Mode......................................................................................... 56 
3.5 Personal Locker Expiry Date Mode..................................................................................................... 57 
4 GAT ECO.Basic Set FD......................................................................................................................... 59 
5 Summary of System Data Carriers........................................................................................................ 59 
5.1 MASTER Data Carrier......................................................................................................................... 59 
5.2 OPEN MASTER Data Carrier (Optional Accessory)........................................................................... 60 
5.3 DELETE MASTER Data Carrier.......................................................................................................... 60 
5.4 PROGRAM Data Carrier..................................................................................................................... 60 
5.5 BATTERY Data Carrier ....................................................................................................................... 61 
5.6 SERVICE Data Carrier........................................................................................................................ 61 
5.7 APP KEY Data Carrier ........................................................................................................................ 61 
5.8 BLOCKING Data Carrier (Optional Accessory)................................................................................... 61 
6 Summary of GL7p Signalization ............................................................................................................ 62 
7
 
CLEANING AND MAINTENANCE .................................... 63
 
1 Cleaning................................................................................................................................................. 63 
2 Maintenance........................................................................................................................................... 63 
3 Functional Testing.................................................................................................................................. 63 
4 Disposal ................................................................................................................................................. 64 
8
 
TECHNICAL DATA ......................................................... 65
 
1 Power Supply......................................................................................................................................... 65 
2 Reading Field......................................................................................................................................... 65 
3 Memory and Time Management............................................................................................................ 65 
4 Control and Display Elements................................................................................................................ 66 
5 Mechanical............................................................................................................................................. 66 
6 Interface................................................................................................................................................. 66 
7 Housing.................................................................................................................................................. 66 
8 Environmental Conditions...................................................................................................................... 66 
9 Dimensions ............................................................................................................................................ 67 
 
 
 
 