1.7 Safety devices
In order to ensure observance of the Essential Safety and Health Protection
Requirements (ESHRs), all our products comply with the requirements of the following
European Directives:
Electrical Safety Directive (2006/95/EC).
Electromagnetic Compatibility Directive (2004/108/EC).
Machine Directive (2006/42/EC).
and include the criteria and the suitable devices that ensure all the provisions.
All the protection and safety devices of the machine and the equipment
installed and all the signs that indicate danger, or provide information or
recommendations must be kept in good conditions in their corresponding
places.
To tamper, modify or change the elements of the machine and the
safety devices constitute fraudulent actions and bear civil and penal
responsibilities for any direct or indirect damage to people, animals,
objects or the environment.
1.7.1 Operator safety
The operators must:
reach the age foreseen by the social laws,
have good general competence and manual ability for coordination and be
precise;
have received proper technical and practical preparation (training) from an skilled
operator;
be aware of the dangers that derive from an improper use of the machine or from
carrying out the prescriptions of this manual in a different way;
wear personal protection equipment (thermal insulation gloves, glasses, masks,
etc.) in compliance with the safety legislation and regulations in force in the
respective country, as prescribed by Directive 89/391/EEC and annexed
directives.
1.7.2 Safety devices of the electrical equipment –Wiring diagram
The electrical equipment of a machine designed and prepared following the EN - CEI
standards already mentioned, as being of class I, is configured as follows:
Mechanical control panel for control the temperature of the baking chamber:
Armored heating elements with outer tube made of stainless steel AISI 321
annealed with neutral zone of 10 mm for the reduction of heat conduction to
the supports. Heating element in nickel chrome 80/20. MgO ceramic insulation.
terminal connection and derivation installed inside the compartment containing
