G.A.S FlavourSpec Manuel d'instructions

Quickstart Manual

FlavourSpec® with PAL RSI

G.A.S. Gesellschaft für

analytische Sensorsysteme mbH

FlavourSpec®–Quickstart Manual

2/66

Version 1.00, October 2020

Valid from FlavourSpec® Firmware Version 4.00 in combination with

Autosampler PAL3-RSI Series II

All data, texts, designs, images and other elements used in this user manual are

protected by copyright law. Any infringement may be subject to legal action.

Passing it on to third parties and producing copies of any kind or form –on the whole

or in parts - is not permitted without written agreement of G.A.S. Any infringement

may be subject to legal action.

G.A.S. reserves the right to realize technical changes to the product without explicitly

mentioning them.

CE-Marking according to:

International Standard EN ISO 17050-1:2004

Directive 2014/35/EU (Low voltage directive);

Directive 2014/30/EU (Electromagnetic compatibility);

Directive 2011/65/EU (RoHS);

Directive 2012/19/EU on waste disposal (Waste Electrical and Electronic

Equipment –WEEE)

G.A.S. Gesellschaft für analytische Sensorsysteme mbH

44227 Dortmund - Germany

G.A.S. Gesellschaft für analytische Sensorsysteme mbH

Otto-Hahn-Str. 15

D-44227 Dortmund

Germany

Phone: (+49) 231/9742-6550

Fax.: (+49) 231/9742-6555

E-Mail: [email protected]

Internet: www.gas-dortmund.de

FlavourSpec®–Quickstart Manual 
 
3/66 
 
 
Table of Content 
 
1General Information ............................................................................................. 5 
1 Information about the Manual........................................................................ 5 
2Explanation of Symbols................................................................................. 5 
3 Notation for dialogs, elements and references .............................................. 6 
4 Scope of Supply ............................................................................................ 7 
5 Liability and Guarantee................................................................................ 13 
6 Copyright..................................................................................................... 13 
7 Return and Disposal.................................................................................... 14 
8 Software Updates........................................................................................ 14 
9 Customer Service........................................................................................ 14 
2Safety................................................................................................................. 15 
1 Intended Use Only....................................................................................... 15 
2 Responsibility of Operator........................................................................... 15 
3 Requirements of Personnel......................................................................... 16 
4 Dangers....................................................................................................... 16 
3Transport, Packing and Storage ........................................................................ 18 
1 Inspection after Transport............................................................................ 18 
2 Packing........................................................................................................ 18 
3 Storage and Transport................................................................................. 18 
4Cleaning and Maintenance ................................................................................ 19 
1 Cleaning...................................................................................................... 19 
2 Maintenance................................................................................................ 19 
5Installation FlavourSpec Device......................................................................... 20 
1 Installation Requirements............................................................................ 20 
2 Unpack the device....................................................................................... 22 
3 Unpack the accessories .............................................................................. 25 
4 Mount the Safety guard............................................................................... 27 
5 Connect the PAL RSI Terminal ................................................................... 28 
6 Check the Preinstalled Connecting Cable................................................... 29 
7 Connect the Gas Supply.............................................................................. 30 
8 Connect the Power Supply.......................................................................... 35 
9 Remove the Transport Lock........................................................................ 37 

FlavourSpec®–Quickstart Manual 
 
4/66 
 
10 Complete the Device................................................................................... 38 
11 Switch on the Device................................................................................... 38 
12 Check essential device postion ................................................................... 39 
13 Prepare the device for operation ................................................................. 40 
6System Operation .............................................................................................. 44 
1 Measurement Requirements ....................................................................... 44 
2 Workflow: Check Injector Position............................................................... 45 
3 Workflow: Check Agitator Position............................................................... 48 
4 Workflow: Check Tray Reference Position.................................................. 52 
5 Workflow: Run a measurement with autosampler ....................................... 57 
6 Workflow: Run a measurement with manual injection................................. 61 
7Appendix............................................................................................................ 64 
1.1 IMS-Spectrum Examples ...................................................................... 64 
2 Corresponding G.A.S. Documents and Tutorials......................................... 66 
 
 

FlavourSpec®–Quickstart Manual

5/66

1 General Information

1.1 Information about the Manual

INFORMATION!

This Quickstart User Manual is an excerpt of the most important

information for installation and initial setup from the User Manual. It

is an addition to the User Manual and does not replace the User

Manual.

This manual describes a safe and adequate handling of the device. Following the

instructions of the indicated safety aspects and instructions as well as the national

and/or local rules and general safety regulations concerning the prevention of

accidents are absolutely imperative.

Before starting the work with the device read the manual completely and thoroughly

particularly the chapter security and respective safety references. Assure that you/the

operator comprehend the terms described.

The manual is part of the device. It must be stored together with and next to the

device at any time.

INFORMATION!

The graphics in this user manual are schematic and may differ from

the actual conditions. The firmware and PC software screenshots in

this user manual may differ from the actual conditions.

1.2 Explanation of Symbols

Important and safety-relevant references in this manual are characterized by

symbols. These indications which are in-line with industrial safety must be respected

and followed at any time.

INFORMATION

This symbol calls information, which are to be considered for

efficient and perfect handling of the equipment.

WARNING

This symbol indicates references, which can lead to damages,

malfunctioning and/or loss of the device.

FlavourSpec®–Quickstart Manual

6/66

DANGER

This symbol marks references, which can lead to health

impairments, injuries, lasting body damages or to death due to

electric current.

DANGER

This Symbol marks paragraphs, which describe potential dangers and

damage due to exposure to radioactive radiation.

1.3 Notation for dialogs, elements and references

Example Dialog:

System ›Connections ›LAN File Transfer ›Settings… ›Test Connection

Example Elements:

Gas Out, Sample gas in

Example: References

Advanced User Manual, Chapter 5.1 Installation Reguirements

Example: Information

keep the transport box

FlavourSpec®–Quickstart Manual

7/66

1.4 Scope of Supply

Assure that you have received the full scope of supply. If there is any part missing,

please contact the GAS-hotline immediately.

FlavourSpec Scope of Supply

FlavourSpec Device coupled Autosampler

PAL3 Series II

FlavourSpec Power supply with cable (1

piece)

FlavourSpec Gas tube Kit

•Driftgas/Carriergas (1 piece)

•2 m 3mm PFA Tubes with 3 mm

Swagelok-Connector (2 Pieces)

•0,65 m 3mm PFA Tubes with 3 mm

Swagelok-Connector (1 Pieces)

FlavourSpec®–Quickstart Manual

8/66

Molecular sieve 200 ml with 1/8” connections

(1 piece)

LAN Cable (1 piece)

FlavourSpec-PAL3 Connection Cable

FlavourSpec Blind plug Set (4 pieces)

(Swagelok 3mm Blind plug with red cap

installed on device connectors)

FlavourSpec®–Quickstart Manual

9/66

FlavourSpec Torx Tool Kit

•Torx Srewdriver 8 mm (1 piece)

•Torx Srewdriver 10 mm (1 piece)

Document Map with Documents and Device

User Manuals

USB-Stick Box with Software und Documents

(1 piece)

Autosampler PAL3 Series II Scope of Supply

Autosampler Power supply with cable (1

piece)

FlavourSpec®–Quickstart Manual

10/66

Terminal with Connection Cable (1 piece)

Agitator Connection Cable (installed)

(1piece)

PAL3 Torx Tool Kit

•Torx Screwdriver 8 mm (1 piece)

•Torx Screwdriver 10 mm (1 piece)

•Torx Screwdriver 20 mm (1 piece)

•Torx Screwdriver 25 mm (1 piece)

Safety Guard including screws (1 piece)

Table des matières

Manuels Équipement industriel populaires d'autres marques

ABB

ABB Unifix AD Manuel

Mark 7

Mark 7 Evolution Manuel utilisateur

Husky

Husky HyPET Manuel utilisateur

bora

bora PM-1800 Manuel utilisateur

Grizzly

Grizzly T32428 Manuel utilisateur

Siemens

Siemens 8MF1 Series Manuel utilisateur

ABB

ABB HT610965 Manuel utilisateur

ABB

ABB SafeLink Manuel utilisateur

Phoenix

Phoenix PHX-150 Manuel utilisateur

ABB

ABB A165-L32 Manuel utilisateur

ABB

ABB HT842936 Manuel utilisateur

Rioned

Rioned UrbanJet Manuel utilisateur

Hermetica

Hermetica 10 Series Manuel utilisateur

HORNER

HORNER OEE Solution Manuel utilisateur

Hammerhead

Hammerhead HG375 Manuel utilisateur

SCHUNK

SCHUNK VERO-S NSE-A3 138 Instructions d'utilisation

ABB

ABB HT566657 Manuel utilisateur

Webasto

Webasto GSE CAN Manuel utilisateur