Furuno FAX-30 Manuel utilisateur
FACSIMILE RECEIVER
FAX-30
Back
The paper used in this manual
is elemental chlorine free.
・FURUNO Authorized Distributor/Dealer
9-52 Ashihara-cho,
Nishinomiya, 662-8580, JAPAN
Telephone : +81-(0)798-65-2111
Fax : +81-(0)798-65-4200
A : NOV 2002
.
Printed in Japan
All rights reserved.
B3 : DEC . 15, 2010
Pub. No. SME-62600-B3
*
00080965100
*
*
00080965100
*
(KAOK ) FAX-30
*
00080965100
*
*
00080965100
*
* 0 0 0 8 0 9 6 5 1 0 0 *
Chapter 1 General ..................................................................................................1
Chapter 2 Circuit Description ..........................................................................2
Chapter 3 Location of Parts................................................................................9
Chapter 4 Maintenance
4.1 Self test ........................................................................................................................11
4.2 LED .............................................................................................................................12
4.3 Test Point.......................................................................................................................12
4.4 Adjustment ..................................................................................................................14
4.5 Jumper setting ..............................................................................................................14
4.6 DIP Switch setting.........................................................................................................14
4.7 Changing Program.........................................................................................................15
Content
s
This page is intentionally left blank.
Chapter 1 General
1
FAX-30 is a weather facsimile receiver. The received facsimile image is displayed on the
NavNet display unit and a PC.
1) NAVTEX function is not compliance with IMO standard. (For Non-SOLAS ship)
2) When FAX image is being received, NAVTEX message cannot be received.
3) The PC is required to run a web browser such as NETSCAPE or INTERNET EXPLORER.
4) Automatic station selection mode for NAVTEX reception requires position data from the
GPS.
5) When both the PC and NavNet are connected, FAX-30 is operated from the PC.
6) Receiving priority
(1) In FAX&NAVTEX mode, NAVTEX message is received except for the time set by
the timer.
(2) In FAX&NAVTEX mode, the priority is as follows.
FAX manual reception > FAX timer reception > NAVTEX reception
(3) The auto reception by receiving FAX start signal is valid only in FAX ONLY mode.
Chapter 2 Circuit Description
2
FAX-30 consists of MAIN, RCV and I/F boards.
Fig.1 Configuration of FAX-30
FAX-30
2.6 m whip antenna + FAX-5,
wire antenna or 6 m whip RCV board
NAVNET or PC
Power supply
12 VDC to 24 VDC
MJ6P connector
MJ3P connector
POWER LED
I/F
board MAIN board
M connector
Autres manuels pour FAX-30
5
Table des matières
Autres manuels Furuno Télécopieur
Furuno
Furuno FAX-207 Manuel utilisateur
Furuno
Furuno FAX-408 Manuel utilisateur
Furuno
Furuno FAX-30 Manuel
Furuno
Furuno FAX-207 Manuel utilisateur
Furuno
Furuno FAX-207 Manuel utilisateur
Furuno
Furuno DFax-208 Comment utiliser
Furuno
Furuno FAX-30 Manuel du propriétaire
Furuno
Furuno FAX-30 Manuel utilisateur
Furuno
Furuno FAX-30 Manuel utilisateur
Furuno
Furuno FAX-410 Manuel utilisateur
