Furrion FRCBRKT-BL Manuel utilisateur
Designed for 5th Wheel, RV, Caravan and Trailer applications
Furrion’s new easy install wireless camera kit comes in two parts,
1. Furrion mount bracket prep kit. Part No. FRCBRKT-BL
2. Furrion Camera and Monitor Kit. Part No. FRC12TA-BL
Check if your RV or Trailer has been pre installed with the mounting bracket
prep kit.
Furrion Digital Wireless Camera System
Contents:
1. Safety Information
2. General Information
3. Installation instructions
4. Operation
5. Trouble shooting
6. Warranty
7. Technical Specification
1
WARNING: Indicates a potentially dangerous
condition. Use extreme caution when
performing this task.
CAUTION: Indicates a critical procedure for
safe and proper operation of the controller.
NOTE: Indicates a procedure or function that
is important for the safe and proper operation of
the controller.
General Safety Information
•Read all of the instructions and cautions in the manual
before beginning installation.
•There are no user serviceable parts inside the Furrion
Rear camera system Do not disassemble or attempt to
repair any part of the camera system.
•Disconnect all sources of power to the camera before
installing.
•There are no fuses or disconnects on the Furrion reversing
camera unit. Install external fuses/breakers as required.
•Do not allow water to enter the LCD Display.
•
Excessive heat can be caused from a loose connection.
Safety Instructions
Please Read these instructions carefully before installation and operating your
Furrion reversing camera unit.
The following symbols are used throughout this manual to indicate potentially
dangerous situations or mark important safety instructions.
Connect 12V power cable to the camera unit using waterproof
connectors.
2
Caution:
A battery or 12V DC electrical system presents a risk
of electrical shock or burn hazard. Ensure all power
sources are isolated before installation.
Warning:
These installation instructions are for the use by
qualified personnel only. To reduce the risk of electric
shock, do not perform any servicing other than that
specified in the operating instructions.
Caution:
To reduce the risk of fire, connect the camera only
to a circuit provided with a maximum branch-circuit
over current protection device.
Note:
Ensure to watertight connectors which connecting
camera power supply cable to power source.
Warning:
Use 16AWG or larger cables to supply power to
camera unit.
Warning:
Ensure to connect the rear camera to the correct
polarity 12V DC power supply. Red = Positive.
3
Installation Safety Precautions
Use correct size cable and connectors for suppling power
to your rear camera
Ensure the power supply circuit has circuit protection
Connect rear camera to a 12-14V DC circuit only
Use insulated tools when working with power supply
Use correct safety equipment when working at elevated levels
Ensure camera prep bracket gasket is correctly sealed and
weatherproof.
Ensure correct polarity of DC power supply to camera
4
General information
Overview:
Thank you for purchasing a Furrion reversing camera system.
Furrion’s reversing camera system is one of the easiest rear view camera
systems to install in your trailer, truck or RV. All that is required is a connection
of a single DC power supply to the rear camera from a reversing power
source.
The Furrion reversing camera system is using digital wireless technology
giving the major benefit of superior signal transmission with low interference
on a single bandwidth channel. This means the Furrion camera unit eliminates
the interferences which other analogue signal systems are subject to, meaning
the Furrion digital system gives you a clearer picture of what is behind you no
matter where you are.
This Furrion system with integrated antenna attached to the camera has been
specifically designed for use on trailers, trucks, 5th wheels, caravans and RV’s.
This system has been designed for extended range applications or security
monitoring.
Features:
This unit can be used as a reversing camera, tow hitch monitor or security
monitor.
This unit features:
Wide angle viewing lens
Night vision LED lights
Camera mounting bracket to reduce glare
Digital wireless signal for clear picture quality
Easy installation
Adjustable camera angle
5
Installation
FRCBRKT-BL
Furrion reversing camera mounting bracket installation:
The Furrion reversing camera prep kit includes:
1 x Reversing camera mounting bracket
1 x Mounting bracket gasket
1 x 6ft power cable
1 x Removable Bracket cover
When wiring the Furrion camera system as a reversing camera,
the power supply for the camera must come from a reversing
indication power source (backup lights) or transmission wiring.
The power source can also be from the 7 way connection on your
trailer using the green wire from the center pin for the back up light
power source or from directly at the back up tail light circuit which
feeds to the reversing bulbs.
For reversing camera use, mount the camera bracket on a elevated
position at the rear of the trailer or RV.
Camera viewing
Furrion camera mounted correctly
Connect camera power cable to reversing backup lights or 7 way cable
This means the camera will only turn on when reverse gear is selected.
Do not mount camera in a low position..
For reversing camera function, do not connect camera to a constant power
source.
For best results, mount the camera in a high position to increase the
viewing angle.
6
Mounting and wiring the camera prep bracket kit
Wiring:
For using your camera kit as a reversing camera system:
1. Isolate the 12V power system
2. To provide power to the wireless camera for use as a reversing camera,
run a 2 core 16AWG internal cable from your reversing (back up) light on
the rear of your trailer, truck or RV, or from your 7 way cable reversing
power supply.
(7way reversing connections.. center pin #7 positive + Ground pin #1 negative).
3. Connect the camera prep kit power cable to the reversing wire from
step 2. Supplied 6 ft power cable for the camera:
Red = Positive
Black = Negative
4. Find a suitable position to mount your camera mounting bracket on the
rear of your trailer or RV. Make sure the mounting position is at the
center line of the RV and is positioned as high as possible.
Ensure the mounting surface is flat and has enough surface area for the
entire mounting bracket to fit.
5. Drill a 5/8” through hole on the rear of the trailer or RV in the position
where the camera is to be mounted. Use a grommit to protect cable.
6. Feed the power cable through the hole and gasket, before mounting the
camera bracket with 4 screws
12V DC from 7 Way connection
12V DC from backup lamp
Use one of these power sources to supply 12V DC when the system is applied as a reversing camera
Furrion camera
Connection cable supplied with prep kit
7
5/8” Hole
Feed connector through PVC gasket
Use 4 screws to fix mounting bracket to back of trailer or RV
Mounting bracket installation
Ensure the bracket is mounted securely and the gasket is watertight.
* If the camera bracket is being mounted as a prep kit without the camera.
secure the wire connector inside the bracket and attached the cover. (as above)
Affix cover if only prep kit is being installed
8
Installation of camera
If your RV or trailer has a Furrion reversing camera prep kit pre installed by
the OEM manufacturer. You will need to contact your local dealer or go to
furrion.com to purchase a Furrion FRC12TA-BL Camera and monitor installation
kit.
To install the camera onto a pre installed mounting bracket:
1. Remove the cable cover which is held by 4 screws on the underside of the
bracket
2. Locate the connector inside the prep kit mounting bracket
3. Connect the camera plug and socket together and install the camera with
the 4 screws
See below:
Camera viewing angle can be adjusted after camera is mounted
9
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Furrion Caméra de sécurité
