furniture123 DMM004 Manuel utilisateur
MARBLE AND GOLD
TABLE LAMP
DMM004
USER MANUAL
Product Size H430mm x W305mm X D305mm
Version Reference 2020/01/09
furniture 123
2
SAFETY WARNINGS
• Read these instructions before use, and save for future reference.
• This table light is only suitable for connection to a 240V~50Hz socket. If you are
unsure about the suitability of the socket, have it checked by a qualified
electrician.
• The table light is a Class II product and so does not require an earth connection.
• This is for domestic, indoor use only, and is not suitable for use within a
bathroom or other humid environment.
• This unit is designed for an E27 Bulb with a maximum rating of 40W. Never fit
bulbs of a higher wattage than specified on the label (as these may cause
overheating and damage the fitting).
• Ensure the table light is not exposed to water or damp conditions.
• Keep the table light away from heat sources such as hobs or ovens.
• This table light may contain delicate parts – be careful during handling and
maintenance to avoid breakage.
• If any modification is made to the unit, it will invalidate the warranty and may
render the product unsafe.
• Do not use if there is any signs of damage to the lamp or the cable.
• If the cable or plug require replacement
• A damaged cable must be repaired by the manufacturer, or a suitably qualified
person.
• Keep children away from the lamp, and do not leave them unsupervised with it.
• Do not look directly into the light source! Your eyes could be damaged.
• Always place the unit on an even and stable surface to prevent it from tipping.
• Do not allow the table light to fall, and do not subject it to strong impacts.
• Do not cover the table light, as this could lead to fire.
CARE INFORMATION
• After use ensure the unit is left 10 minutes to cool before replacing, adjusting or
cleaning.
• Clean with a dry cloth only. Do not use liquid or abrasive cleaners on this product.
DISPOSAL
Disposal: Do not dispose this product as unsorted municipal waste. Collection of such waste
must be handled separately as special treatment is necessary.
Recycling facilities are now available for all customers at which you can deposit
your old electrical products. Customers will be able to take any old electrical
equipment to participating civic amenity sites run by their local councils. Please
remember that this equipment will be further handled during the recycling process,
so please be considerate when depositing your equipment. Please contact the local
council for details of your local household waste recycling centres.
3
PARTS
SUPPORT
Should your product be faulty or have missing parts then please contact our customer services
department who will be happy to assist you, please have your order number and batch code or
date stamp ready.
CUSTOMER SERVICES 0871 984 1924
01
01
A
B
4
ASSEMBLY
C
C
B
B
D
A
2. Fit the lamp shade (C) on the bulb holder (B)
1. Unscrew the ring (A) from the bulb holder (B).
with help of the mid-ring (D) in shade.
(3) After place the lamp shade (C) on the bulb holder (B)
tight the plastic ring (A) on the bulb holder (B) to fix the
lamp shade (C).
Do not plug in the lamp unless it is fully assembled.
Table des matières
Autres manuels furniture123 Éclairage domestique
Manuels Éclairage domestique populaires d'autres marques
JONATHAN Y
JONATHAN Y JYL5019A Manuel utilisateur
JONATHAN Y
JONATHAN Y JYL6007A Manuel utilisateur
Philips
Philips Ledino 31606/11/16 Manuel utilisateur
Salus
Salus UG600 Manuel utilisateur
Safavieh Lighting
Safavieh Lighting CANDRI TBL4427A Manuel utilisateur
Hunter
Hunter Bullet Spotlight Kit Manuel d'instructions
