Fujitsu x150f Manuel utilisateur
Display Unit
Fujitsu x150f
User's Guide
Brugervejledning
Käsikirja
Manuel d'utilisation
Benutzerhandbuch
Manual do utilizador
Guía de usuario
Användarhandbok
Project Fujitsu x150f Display Unit print original
Writer Marita Näsman-Repo
Date March 2, 1998
Display Unit Fujitsu x150f
User’s Guide
First Edition Document Number:
March 1998 PM01601UA
This document was produced by Fujitsu Computers Oy in Espoo, Finland.
If you have comments or suggestions, we’d like to hear from you!
Mail: Internet:
User Documentation
PO Box 10 X.400:
FIN-02611 Espoo G=pcd fin 1 S=documentation
Finland O=icl OU1=fin1701
P=icl A=elisa C=fi
Fujitsu Computers (hereinafter Fujitsu) endeavours to ensure that the information in
this document is correct, but accepts no liability for any error or omission in the same.
Any procedures described in this document for operating Fujitsu products should be
read and understood by the operator before such products are used. To ensure that
Fujitsu products function without risk to safety or health, such procedures should be
strictly observed by the operator.
The development of Fujitsu products and services is continuous and published
information may not be up to date. Any particular issue of a product may contain part
only of the facilities described in this document or may contain facilities not described
herein. It is important to check the current position with Fujitsu.
Specifications and statements as to performance in this document are Fujitsu estimates
intended for general guidance. They may require adjustment in particular
circumstances and should therefore not be taken as formal offers or commitments.
Statements in this document are not part of a contract or program product licence
save insofar as they are incorporated into a contract or licence by express written
reference. Issue of this document does not entitle the recipient to access to or use of
the products described, and such access or use may be subject to separate contracts or
licences.
Microsoft, MS-DOS, Windows, the Windows logo and Microsoft NT are registered
trademarks of Microsoft Corporation in the USA and other countries. Other products
mentioned may be trademarks or registered trademarks of their respective owners.
ENERGY STAR is a U.S. registered trademark.
© Copyright Fujitsu Computers Ltd 1998
Project Fujitsu x150f Display Unit print original
Writer Marita Näsman-Repo
Date March 2, 1998
Contents
Your new display unit .................3
Safety information ...................4
Selecting a suitable location ..............5
Installing your display unit ...............6
Display power management ..............9
Adjusting the picture .................10
Cleaning your display unit ..............14
Troubleshooting....................15
Technical fact sheet ..................18
TCO’95 ........................20
Project Fujitsu x150f Display Unit print original
Writer Marita Näsman-Repo
Date March 2, 1998
English
Project Fujitsu x150f Display Unit print original
Writer Marita Näsman-Repo
Date March 2, 1998
Project Fujitsu x150f Display Unit print original
Writer Marita Näsman-Repo
Date March 2, 1998
Your new display unit
Your new display unit is a highly ergonomic TFT-LCD colour
display unit
nwith Multi-Domain Vertical Alignment (MVA) and a wide
viewing angle, both vertically and horizontally symmetric
nwith a high contrast ratio
nsupporting high screen refresh rates and full scan flicker-free
picture quality
nallowing easy setup through Plug-and-Play
nwith On Screen Display menus for user control
ncomplying with MPR90 and TCO95 recommendations for low
electromagnetic fields and environmental specifications
nwith power management features that allow the unit to enter a
low power consumption state after a period of inactivity
When you unpack the display unit, check to make sure that you have
the items below.
English
3
Safety information
When you set up and use your display unit, follow the safety
instructions below.
nDo not connect an extension cord.
nIf you need to replace your cords, contact your Fujitsu sales
representative.
nDo not under any circumstances open the display unit cabinet.
nSlots in the cabinet are provided for ventilation. Do not block
the ventilation slots in the display unit cabinet.
English
4
Project Fujitsu x150f Display Unit print original
Writer Marita Näsman-Repo
Date March 2, 1998
Project Fujitsu x150f Display Unit print original
Writer Marita Näsman-Repo
Date March 2, 1998
Selecting a suitable location
nPlace the display unit at least 30 cm from other electrical or
heat-emitting equipment and allow at least 10 cm on each side
for ventilation.
nPlace the display unit in a position where no light shines
directly onto or is reflected on the screen.
nTo reduce eye strain, avoid installing the display unit against a
light source such as a window or a lamp.
nPlace your display unit at a comfortable viewing height and
distance: most people prefer the top line of the text to be at or
just below eye level and the display within arm’s length (a
distance of 45 to 75 cm) when you are comfortably seated. You
can tilt and swivel the display unit to get a good viewing angle.
nThis display unit has an anti-glare antistatic screen. The use of
an additional anti-glare screen is not recommended as it will
impair picture quality.
English
5
Installing your display unit
Before you start cabling your display unit, check that the
power is off on all units. To avoid any possibility of electric
shock, always connect your equipment to properly earthed
outlets.
1. Place the display unit on a level and sturdy surface.
2. Remove the stand cover by pushing inwards on both sides of
the stand with your fingers (1), and simultaneously pulling the
cover toward you with your thumbs (2). Then lift the cover up
and off (3), see illustration below.
English
6
Project Fujitsu x150f Display Unit print original
Writer Marita Näsman-Repo
Date March 2, 1998
11
2
3
3. Connect the display unit’s signal cable (a) to the system unit
and to the display unit input terminal , and secure it with
the two screws. The connector pins may be protected against
damage by a plastic cover which needs to be removed first.
Connect the DC cable (b) plug to the power connector
of the display unit as shown below.
4. Bundle the DC cable (b). Plug the power cable (c) into the AC
adapter as shown below.
5. Then plug the power cable (c) to a 100V - 240V earthed
electrical outlet as shown below.
English
7
Project Fujitsu x150f Display Unit print original
Writer Marita Näsman-Repo
Date March 2, 1998
ab
c
Project Fujitsu x150f Display Unit print original
Writer Marita Näsman-Repo
Date March 2, 1998
6. Place the AC adapter in the holder and close the stand cover,
see illustration below.
7. Turn on the display unit using the power switch (1) and check
to make sure that the power LED (2) is on, as shown below. If
not, repeat steps 3 to 5 or refer to the Troubleshooting section
of this guide.
8. Turn on the power to the computer. The picture will appear
within about 15 seconds. Adjust the picture to obtain optimum
picture quality. See the Adjusting the picture section in this
guide for more information.
English
8
ENTER MENU
1
2
Table des matières
Autres manuels Fujitsu Moniteur
Fujitsu
Fujitsu Plasmavision P42HTA51E Series Manuel utilisateur
Fujitsu
Fujitsu B23T-6 LED Manuel utilisateur
Fujitsu
Fujitsu B20T-6 Manuel utilisateur
Fujitsu
Fujitsu 24 inch Color LCD Monitor Manuel utilisateur
Fujitsu
Fujitsu E23T-6 Manuel utilisateur
Fujitsu
Fujitsu L20T-3 Manuel utilisateur
Fujitsu
Fujitsu P42XHA58E Series, P50XHA58E Series Manuel utilisateur
Fujitsu
Fujitsu Plasmavision PDS4204 Manuel utilisateur
Fujitsu
Fujitsu Plasmavision P63XHA70W Manuel utilisateur
Fujitsu
Fujitsu Plasmavision PDS4213 Manuel utilisateur
Fujitsu
Fujitsu Plasmavision W P55XHA30E Manuel utilisateur
Fujitsu
Fujitsu SCENICVIEW P17-3P Manuel utilisateur
Fujitsu
Fujitsu Plasmavision PDS4203 Manuel utilisateur
Fujitsu
Fujitsu MCM 174V Manuel utilisateur
Fujitsu
Fujitsu B27T-7 Manuel utilisateur
Fujitsu
Fujitsu Plasmavision PDS4233W Manuel utilisateur
Fujitsu
Fujitsu B34-9 UE Manuel utilisateur
Fujitsu
Fujitsu Plasmavision PDS4211 Manuel utilisateur
Fujitsu
Fujitsu B24W-7 LED Manuel utilisateur
Fujitsu
Fujitsu P24W-6 IPS Manuel utilisateur
