- 3 -
Temperature switch reference
Open
1. Set the Humidity Setting (On/Off switch) to the off.
2. Connect the plug to the socket.
3. Set the Humidity Setting (On/Off switch) to the desired humidity rate, and it’ll start
to work and temperature will be monitored automatically.
Water tank
1. When the water tank is full, the indicator light will
show (compressor and fan will stop running).
2. Pull out the water tank and empty it.
3. Place it back into the unit. (as picture)
Continuous drainage (if continuous dehumidify
please continuous drainage as follows)
1. Pull out water tank
2. Remove rubber cap on the drainage outlet
at the back of unit (as picture)
3. Connect the drainage hose to the drainage
outlet at the back of the unit
4. Place water tank into the unit
5. Set the Humidity Setting (On/Off switch) to
the “Continue” and it starts to operate.
6. The diameter of drainage hose is 10 mm.
Turn off
1. Set the Humidity Setting (On/Off switch) to off.
2. Cut off the power if unit is not in use.
