Frigidaire FMV157G Manuel utilisateur

or Visit our Website at:

READ CAREFULLY.

KEEP THESE INSTRUCTIONS.

Installation Over the Range

Instructions Microwave Oven

Read these instructions completely and carefully.

•IMPORTANT – Save these

instructions for local inspector’s use.

•IMPORTANT – Observe all

governing codes and ordinances.

•Note to Installer – Be sure to leave these

instructions with the Consumer.

BEFORE YOU BEGIN •Note to Consumer – Keep these

instructions for future reference.

•Skill level – Installation of this appliance requires

basic mechanical and electrical skills.

•Proper installation is the responsibility of the installer.

•Product failure due to improper installation is not

covered under the Warranty.

http://www.frigidaire.com

1-800-944-9044(US)

Questions? Call 1-800-668-4606(Canada)

Recirculating ........................................ 19–22

Attach Mounting Plate to Wall ............19

Preparation of Top Cabinet ................19

Check Microwave Assembly ................20

Adapting Microwave Blower

for Recirculation ..........................20, 21

Mount the Microwave Oven ..........21, 22

Installing the Charcoal Filter ..............22

Before You Use Your Microwave .......................... 23

CONTENTS

General information

Important Safety Instructions .................................. 3

Electrical Requirements .......................................... 3

Hood Exhaust ...................................................... 4, 5

Damage – Shipment/Installation.............................. 6

Parts Included.......................................................... 6

Tools You Will Need ................................................ 7

Mounting Space ...................................................... 7

Step-by-step installation guide

Placement of Mounting Plate ............................ 8–10

Removing the Mounting Plate ...................... 8

Finding the Wall Studs.................................. 8

Determining Wall Plate Location.................. 9

Aligning the Wall Plate................................ 10

Installation Types.............................................. 11–22

Outside Top Exhaust ............................ 12–14

Attach Mounting Plate to Wall ............12

Preparation of Top Cabinet ................13

Checking for Proper Damper

Operation............................................13

Mount the Microwave Oven ..........13, 14

Adjust the Exhaust Adaptor ................14

Connecting Ductwork..........................14

Outside Back Exhaust............................ 15–18

Preparing Rear Wall for

Outside Back Exhaust..........................15

Remove Exhaust Adaptor ......................15

Attach Mounting Plate to Wall ............16

Preparation of Top Cabinet ................16

Adapting Microwave Blower

for Outside Back Exhaust................16, 17

Mount the Microwave Oven ................18

Installation Instructions

This product requires a three-prong grounded outlet.

The installer must perform a ground continuity check

on the power outlet box before beginning the

installation to insure that the outlet box is properly

grounded. If not properly grounded, or if the outlet

box does not meet electrical requirements noted

(under ELECTRICAL REQUIREMENTS), a qualified

electrician should be employed to correct any

deficiencies. CAUTION: For personal

safety, remove house fuse

or open circuit breaker

before beginning

installation to avoid severe

or fatal shock injury.

CAUTION: For personal safety, the mounting surface

must be capable of supporting the cabinet load, in

addition to the added weight of this 63–85 pound

(28.5–38.5 kg) product, plus additional oven loads of

up to 50 pounds (22.7 kg) or a total weight of

113–135 pounds (51.3–61.2 kg).

CAUTION: For personal safety, this product cannot

be installed in cabinet arrangements such as an island or

a peninsula. It must be mounted to BOTH a top cabinet

AND a wall.

NOTE: For easier installation and personal safety, it is

recommended that two people install this product.

IMPORTANT – PLEASE READ CAREFULLY. FOR

PERSONAL SAFETY, THIS APPLIANCE MUST BE

PROPERLY GROUNDED TO AVOID SEVERE OR

FATAL SHOCK.

The power cord of this

appliance is equipped with a

three-prong (grounding)

plug which mates with a

standard three-prong

(grounding) wall receptacle

to minimize the possibility

of electric shock hazard

from this appliance.

You should have the wall receptacle and circuit checked

by a qualified electrician to make sure the receptacle is

properly grounded.

Where a standard two-prong wall receptacle is

encountered, it is very important to have it replaced

with a properly grounded three-prong wall receptacle,

installed by a qualified electrician.

DO NOT, UNDER ANY CIRCUMSTANCES, CUT,

DEFORM OR REMOVE ANY OF THE PRONGS

FROM THE POWER CORD. DO NOT USE WITH

AN EXTENSION CORD.

IMPORTANT SAFETY INSTRUCTIONS

ELECTRICAL

REQUIREMENTS

Product rating is 120 volts AC, 60 Hertz, 15 amps and

1.6 kilowatts. This product must be connected to a

supply circuit of the proper voltage and frequency.

Wire size must conform to the requirements of the

National Electrical Code or the prevailing local

code for this kilowatt rating. The power supply

cord and plug should be brought to a separate

15- to 20- ampere branch circuit single grounded

outlet. The outlet box should be located in the

cabinet above the microwave oven. The outlet box

and supply circuit should be installed by a qualified

electrician and conform to the National Electrical

Code or the prevailing local code.

Ensure proper

ground exists

before use

Installation Instructions

EQUIVALENT NUMBER EQUIVALENT

DUCT PIECES LENGTH x USED = LENGTH

Roof Cap 24 Ft. (7.3 m) x (1) = 24 Ft. (7.3 m)

12 Ft. (3.6 m) Straight Duct 12 Ft. (3.6 m) x (1) = 12 Ft. (3.6 m)

(6”/15.2 cm Round)

Rectangular-to-Round 5 Ft. (1.5 m) x (1) = 5 Ft. (1.5 m)

Transition Adaptor*

Equivalent lengths of duct pieces are based on actual tests and

reflect requirements for good venting performance with any vent hood. Total Length = 41 Ft. (12.5 m)

HOOD EXHAUST

The following chart describes an example of one possible

ductwork installation.

NOTE: Read these next two pages only if you plan to vent your exhaust to the

outside. If you plan to recirculate the air back into the room, proceed to page 6.

OUTSIDE TOP EXHAUST (EXAMPLE ONLY)

NOTE: For back exhaust, care should be taken to align exhaust with space between studs, or wall should be prepared

at the time it is constructed by leaving enough space between the wall studs to accommodate exhaust.

* IMPORTANT: If a rectangular-to-round transition adaptor is used, the bottom corners of the damper

will have to be cut to fit, using the tin snips, in order to allow free movement of the damper.

The following chart describes an example of one possible

ductwork installation.

Installation Instructions

OUTSIDE BACK EXHAUST (EXAMPLE ONLY)

EQUIVALENT NUMBER EQUIVALENT

DUCT PIECES LENGTH* x USED = LENGTH

Wall Cap 40 Ft. (12.2 m) x (1) = 40 Ft. (12.2 m)

3 Ft. Straight Duct 3 Ft. (0.9 m) x (1) = 3 Ft. (0.9 m)

(31⁄4” x 10”/8.2 x 25.4 cm

Rectangular)

90° Elbow 10 Ft. (3 m) x (2) = 20 Ft. (3 m)

Equivalent lengths of duct pieces are based on actual tests and

reflect requirements for good venting performance with any vent hood. Total Length = 63 Ft. (19.2 m)

EQUIVALENT NUMBER EQUIVALENT

DUCT PIECES LENGTH x USED = LENGTH

Rectangular-to-Round 5 Ft. (1.5 m) x ( ) = Ft. or m

Transition Adaptor*

Wall Cap 40 Ft. (12.2 m) x ( ) = Ft. or m

90° Elbow 10 Ft. (3 m) x ( ) = Ft. or m

45° Elbow 5 Ft. (1.5 m) x ( ) = Ft. or m

90° Elbow 25 Ft. (7.6 m) x ( ) = Ft. or m

45° Elbow 5 Ft. (1.5 m) x ( ) = Ft. or m

Roof Cap 24 Ft. (7.3 m) x ( ) = Ft. or m

Straight Duct 6“ (15.2 cm) 1 Ft. (0.3 m) x ( ) = Ft. or m

Round or 31⁄4“ x 10“

(8.2 x 25.4 cm) Rectangular

Total Ductwork = Ft. or m

Equivalent lengths of duct pieces are based on actual tests

and reflect requirements for good venting performance with

any vent hood.

* IMPORTANT: If a rectangular-to-round transition

adaptor is used, the bottom corners of the damper

will have to be cut to fit, using the tin snips, in order

to allow free movement of the damper

NOTE: If you need to install ducts, note that the total

duct length of 31⁄4”x 10”(8.2 x 25.4 cm) rectangular or

6”(15.2 cm) diameter round duct should not exceed

120 equivalent feet (36.5 m).

Outside ventilation requires a HOOD EXHAUST DUCT.

Read the following carefully.

NOTE: It is important that venting be installed using

the most direct route and with as few elbows as possible.

This ensures clear venting of exhaust and helps prevent

blockages. Also, make sure dampers swing freely and

nothing is blocking the ducts.

Exhaust connection:

The hood exhaust has been designed to mate with

a standard 31⁄4”x 10”(8.2 x 25.4 cm) rectangular duct.

If a round duct is required, a rectangular-to-round

transition adaptor must be used. Do not use less than

a 6”(15.2 cm) diameter duct.

Maximum duct length:

For satisfactory air movement, the total duct length of

31⁄4”x 10”(8.2 x 25.4 cm) rectangular or 6”(15.2 cm)

diameter round duct should not exceed 120 equivalent

feet (36.5 m).

Elbows, transitions, wall and roof caps,

etc., present additional resistance to airflow and are

equivalent to a section of straight duct which is longer

than their actual physical size. When calculating the total

duct length, add the equivalent lengths of all transitions

and adaptors plus the length of all straight duct sections.

The chart below shows you how to calculate total

equivalent ductwork length using the approximate feet

of equivalent length of some typical ducts.

Installation Instructions

PART

QUANTITY

Top Cabinet 1

Template

Rear Wall 1

Template

Installation 1

Instructions

Separately 2

Packed

Grease

Filters

PART QUANTITY

Wood Screws 2

(1⁄4“ x 2“)

Toggle Bolts (and 4

wing nuts) (3⁄16“ x 3“)

Self-Aligning Machine 3

Screws (1⁄4“-28 x 31⁄4“)

Nylon Grommet 2

(for metal cabinets)

Power Cord Strap 1

(plastic)

•If the unit is damaged in shipment, return the

unit to the store in which it was bought for repair

or replacement.

•If the unit is damaged by the customer, repair or

replacement is the responsibility of the customer.

•If the unit is damaged by the installer (if other

than the customer), repair or replacement must

be made by arrangement between customer

and installer.

DAMAGE—SHIPMENT/

INSTALLATION PARTS INCLUDED (CONT.)

INSTALLATION

INSTRUCTIONS

ADDITIONAL PARTS

TOP CABINET TEMPLATE

Installation Instructions

REAR

WALL

TEMPLATE

PARTS INCLUDED

You will find the installation hardware contained in

a packet with the unit. Check to make sure you have

all these parts.

NOTE: Some extra parts are included.

HARDWARE PACKET

TOOLS YOU WILL NEED

# 1 Phillips screwdriver Pencil Ruler or tape measure and

straight edge Carpenter square

(optional)

Tin snips (for cutting

damper, if required) Electric drill with 3⁄16“, 1⁄2“and 5⁄8“

drill bits

Hammer (optional)

Stud finder or

Filler blocks or scrap

wood pieces, if needed

for top cabinet spacing

(used on recessed bottom

cabinet installations only)

Gloves

Saw (saber, hole or keyhole)

Level Duct and masking tape

MOUNTING SPACE

NOTES:

•The space between the cabinets must be

30“(76.2 cm)wide and free of obstructions.

•If you are going to vent your microwave oven

to the outside, see Hood Exhaust Section for

exhaust duct preparation.

•When installing the microwave oven beneath

smooth, flat cabinets, be careful to follow the

instructions on the top cabinet template for

power cord clearance.

Backsplash

66″(167.6 cm)

or More from

the Floor to the

Top of the

Microwave

30“(76.2 cm)

2“ (5.1 cm)

30“

(76.2 cm)

min.

161⁄2“ (41.9 cm)

Bottom Edge of

Cabinet Needs to

be 30″(76.2 cm)

or More from the

Cooking Surface

Installation Instructions

Scissors

(to cut template, if necessary)

Safety goggles

Find the studs, using one of the following

methods:

A. Stud finder – a magnetic device which

locates nails. OR

B. Use a hammer to tap lightly across the

mounting surface to find a solid sound.

This will indicate a stud location.

After locating the stud(s), find the center by

probing the wall with a small nail to find the edges

of the stud. Then place a mark halfway between

the edges. The center of any adjacent studs should

be 16″(40.6 cm) or 24″(61 cm) from this mark.

Draw a line down the center of the studs.

THE MICROWAVE MUST BE CONNECTED TO

AT LEAST ONE WALL STUD.

Remove the installation instructions, filters, glass

tray and the small hardware bag. Do not remove

the Styrofoam protecting the front of the oven.

Fold back all 4 carton flaps fully against carton

sides. Then carefully roll the oven and carton over

onto the top side. The oven should be resting in

the Styrofoam.

REMOVING THE MICROWAVE

OVEN FROM THE CARTON/

REMOVING THE MOUNTING

PLATE

FINDING THE WALL STUDS

PLACEMENT OF THE MOUNTING PLATE

Wall

Studs

Center

Carton

Pull the carton up and off the oven.

Remove the screws from the mounting plate.

This plate will be used as the rear wall template

and for mounting. Reinstall the screws into the

holes where they were removed.

Mounting

Plate

Screws

Styrofoam

Installation Instructions

Remove and properly discard plastic bags.

DETERMINING WALL PLATE LOCATION UNDER YOUR CABINET

Your cabinets may have decorative trim that

interferes with the microwave installation. Remove

the decorative trim to install the microwave properly

and to make it level.

THE MICROWAVE MUST BE LEVEL.

Use a level to make sure the cabinet bottom is level.

If the cabinets have a front overhang only, with no

back or side frame, install the mounting plate down

the same distance as the front overhang depth. This

will keep the microwave level.

Measure the inside depth of the front overhang.

Draw a horizontal line on the back wall an equal

distance below the cabinet bottom as the inside

depth of the front overhang.

For this type of installation with front overhang only,

align the mounting tabs with this horizontal line, not

touching the cabinet bottom as described in Step D.

Plate position—beneath flat bottom

cabinet

Plate position—beneath recessed bottom

cabinet with front overhang

Mounting Plate Tabs

Touching the Cabinet Bottom

At least 30″(76.2 cm),

up to 36″(91.4 cm)

Plate position—beneath framed recessed

cabinet bottom

Installation Instructions

30″(76.2 cm)

to Cooktop

Mounting Plate Tabs

Touching the Back Frame

Mounting Plate with

Tabs Below Cabinet

Bottom the Same

Distance as the Front

Overhang Depth

30″(76.2 cm)

to Cooktop

ALIGNING THE WALL PLATE

Draw a vertical line on the wall at the center of the

30″(76.2 cm) wide space.

Use the mounting plate as the template for the rear

wall. Place the mounting plate on the wall, making

sure that the tabs are touching the bottom of the

cabinet or the level line drawn in Step C for cabinets

with front overhang. Line up the notch and centerline

on the bottom of the mounting plate to the centerline

on the wall.

While holding the mounting plate with one hand,

draw circles on the wall at holes A, B, C and D

(see illustration above/actual plate marked with

arrows). Four holes must be used for mounting.

NOTE: If neither C nor D is in a stud, find a stud

somewhere in area E and draw a fifth circle to line up

with the stud. It is important to use at least one wood

screw mounted firmly in a stud to support the weight

of the microwave.

Set the mounting plate aside.

Drill holes on the circles. If there is a stud, drill a 3⁄16″

hole for wood screws. For holes that don’t line up with

a stud, drill a 5⁄8″hole for toggle bolts.

NOTE: DO NOT MOUNT THE PLATE AT

THIS TIME.

Installation Instructions

CAUTION: Wear gloves

to avoid cutting fingers on

sharp edges.

Draw a Vertical

Line on Wall

from Center of

Top Cabinet

Area E

Hole A Hole B

Hole D

Hole C

Centerline

Notches

Autres manuels pour FMV157G

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Frigidaire Four à micro-ondes

Frigidaire

Frigidaire 1402483L Manuel du propriétaire

Frigidaire

Frigidaire MWV150KW - 1.5 Cu Ft Microwave Instructions d'installation

Frigidaire

Frigidaire FGBM185KB - Microwave Guide de démarrage rapide

Frigidaire

Frigidaire FPMC2785K F Manuel utilisateur

Frigidaire

Frigidaire CPBM189KF Manuel utilisateur

Frigidaire

Frigidaire Gallery FGMV154CLF Manuel du propriétaire

Frigidaire

Frigidaire CGMV174KF Manuel utilisateur

Frigidaire

Frigidaire FFCE1431LB Manuel de service

Frigidaire

Frigidaire FFMV152CL W Instructions d'utilisation et de sécurité

Frigidaire

Frigidaire FMV152KB - 1.5 Cu Ft Microwave Manuel utilisateur

Frigidaire

Frigidaire CGMV173KB Guide de l'utilisateur

Frigidaire

Frigidaire FGMC3065KW - Microwave Oven Combination Instructions d'installation

Frigidaire

Frigidaire FPMC3085KF - Microwave Oven Combination Manuel utilisateur

Frigidaire

Frigidaire GLMB186C Manuel utilisateur

Frigidaire

Frigidaire FMT116U1B Manuel utilisateur

Frigidaire

Frigidaire Gallery FGMC3065K Manuel utilisateur

Frigidaire

Frigidaire PLMVZ169HC - 1.6 cu. Ft. Microwave Oven Manuel utilisateur

Frigidaire

Frigidaire PLMVZ169HC - 1.6 cu. Ft. Microwave Oven Manuel utilisateur

Frigidaire

Frigidaire FMV156E Mode d’emploi

Frigidaire

Frigidaire PLMV178HC Manuel utilisateur

Frigidaire

Frigidaire FGMV155CTF Manuel utilisateur

Frigidaire

Frigidaire CGLMV169 Manuel utilisateur

Frigidaire

Frigidaire GMOS1962AF Manuel utilisateur

Frigidaire

Frigidaire FFMV1645TSA Manuel utilisateur

Manuels Four à micro-ondes populaires d'autres marques

Daewoo

Daewoo KOG-574R0S Manuel utilisateur

LG MH7040SS Manuel utilisateur

Sharp

Sharp R-895(AL)M Manuel utilisateur

Dometic

Dometic DOTRM13W Manuel utilisateur

Sanyo

Sanyo EM-X680 Manuel utilisateur

Sharp

Sharp R-393M Manuel utilisateur

KitchenAid

KitchenAid KMCX4510 Instructions d'installation

Smeg

Smeg S45MCX1 Manuel utilisateur

Russell Hobbs

Russell Hobbs RHM2044 Manuel utilisateur

Sunbeam

Sunbeam SMW759 Manuel utilisateur

Gallet

Gallet FMOE230S Manuel utilisateur

Bosch

Bosch CEG732X.1B Manuel utilisateur

Dometic

Dometic Roadmate 230 Manuel utilisateur

Samsung

Samsung SJ0396W Manuel utilisateur

Sanyo

Sanyo EM-P494WS Manuel utilisateur

Sharp

Sharp R-240 Manuel utilisateur

Electrolux

Electrolux EMS2840 Manuel utilisateur

Daewoo

Daewoo KOC-984T2S13 Manuel utilisateur