WHAT TO DO...
When the fridge is not in use for a prolonged period:
• Remove thepowerplug from the power point.
•Remove all contents from the fridge.
• Dry the interior and leave thedoor open for a few days.
When you wish to move the fridge:
•Secure allmovable parts and contents.
(Package them separately if necessary.)
• Transport the fridge only in an upright position. In any other position you
may damage the compressor.
Before calling service, pleasefollow the checklistbelow.
This may save you an expensive service call.
WARNING-Improperuseof the grounding plugcanresult ina riskofelectric
shock.Ifitisnecessarytouse anextension cord,useonly a 3-wireextension
cordthat hasa3-bladegroundingplug anda3-slotreceptacle thatwill
acceptthe plugonthe appliance.The markedrating oftheextensioncord
shouldbeAC115-120V,10A, ormore.Ifa grounding adapter is used,make
surethe receptacle boxisfullygrounded.
If the refrigerator seems too warm inside:
•Check that the door has not been opened too frequently or for too long.
•Check that the interior circulation is not obstructed by having too many
goodsstored. (The fridge is overloaded)
• Did you store anything hot.without firstcooling it to room temperature?
• Is there sufficient clearancearoundallsides and above the fridge?
If the fridge starts making any unusual noises:
• Is it wobbling? Re-level itand check if it now operates normally.
•Have any objects fallen behind the fridge? If so, remove them and check if
operation is now normal.
• Are any containers inside the fridge vibrating or resonating?If so, rearrange
them then checkto see if operation has returned to normal.
7.Insertthebottomhingeattheleftside
usingthe twoscrewspreviously removed
in step6.
NOTE: Do not tightenscrews.
8.Standthe cabinet.
9. Replacethe doormakingsurethebottom
socketentersthe bottom hingepin.
Be surewashers areinplace.
10.Whileholding thedoorintheclosed
position,securethetophinge at the left
side using thetwoscrews previously
removedat thebeginning in step2.
Donottightenthescrewsuntilthetopof
thedoor isleveled withthetopcabinet.
11.Replace thehinge cover.
12. Tools required:
-8MM & 10MMsocket-ratchet.
-Putty knife orthin-blade screwdriver.
