Freedom Innovations Kinnex 2.0 Manuel utilisateur
©2019 Freedom Innovations, LLC. All rights reserved. Kinnex is a trademark of Freedom Innovations, LLC. CG-03-009 Rev. A Kinnex Patient User Guide
FREEDOM INNOVATIONS
Global Headquarters
3 Morgan
Irvine CA 92618
toll-free 888.818.6777
tel 949.672.0032
www.freedom-innovations.com
For more information, consult
the Instructions for Use Manual or
call 888.818.6777.
Check Battery Charge Level
Press and release the Battery Button once to check battery charge level.
Indicator lights will illuminate briey displaying the charge level. The table
below describes the indicator lights when the Kinnex ankle is discharging
(not plugged in).
While charging (plugged in), the indicator light ashes at a rate that
indicates the amount of charge in the battery. The longer the light stays
illuminated during the ash, the higher the charge. Once the ankle is
completely charged, the indicator light will be solid green.
Change Footwear
The Change Footwear Button allows adjusting to changes in footwear.
To change footwear follow these steps:
1. Don your Kinnex ankle with the new footwear.
2. Press and hold the Change Footwear Button until the indicator light in
the button begins to ash white.
3. Once the white indicator light begins to ash, stand up straight with
your feet shoulder width apart.
4. Remain still until the white indicator light stops ashing. This usually
takes less than 5 seconds.
Patient
User Guide
5. If the Kinnex ankle cannot adjust within 10 seconds it will indicate an
error condition by alternating ashing of the white and red indicator
lights. The error indicator will ash for 15 seconds or until the Change
Footwear Button is pressed and released.
Manual Lock Mode
The Manual Lock is designed to assist with driving a car, putting on clothes
or footwear, or any activity where a xed ankle position is desired. When
active, the Kinnex ankle will stay in the current position until the Change
Footwear Button is double-pressed.
To use Manual Lock:
1. Move the Kinnex ankle to the desired orientation.
2. Press the Change Footwear Button twice quickly.
3. The Change Footwear Button white indicator light will turn on while the
Kinnex ankle is locked.
4. Press the Change Footwear Button twice quickly again to release the lock.
5. The white indicator light will turn o and return to normal function.
Indicator Light Charge Level
Solid green 51% - 100%
Flashing green 21% - 50%
Solid red 11% - 20%
Flashing red 1% - 10%
Connect with us
#freedomeveryday
™2.0
FREEDOM INNOVATIONS
Download the Kinnex App from the iTunes store
or Google Play store for the Android App.
1
2
Patient User Guide
Check Battery Status: Battery status is indicated in Status Screen and also is displayed by
battery symbol in bottom right of screen. The number of bars indicates the battery status.
To Add or Change Footwear: Tap the Shoe icon at the bottom of the screen. To add a pair of
shoes, tap the (+) button in the top right of the screen. Follow instructions on the
screens to name and calibrate shoes.
To change to a dierent pair of shoes, tap the Shoe icon which will provide a list of saved
shoes. Tap the name of the desired shoes. Any resistance changes made will be saved under
that shoe setting.
*Note: The name of the current pair of shoes to which the Kinnex is calibrated is shown at the
bottom of the screen.
To Engage the Manual Lock: This feature is designed to assist with driving a car, putting
on clothes or footwear, or any activity where a xed ankle position is desired. To engage,
tap the“Tools”icon at the bottom of the screen. Tap“Manual Lock”then slide the switch
to the right to turn on (indicated by green). To turn o the “Manual Lock” feature, slide
switch back to the left.
It is required to engage the lock when driving.
CAUTION: When the battery is completely depleted, the Manual Lock feature is not
available and driving is NOT recommended.
Disconnect from App
To disconnect the app from the ankle, tap on the“Tools”icon on the bot-
tom of the screen.
Then tap“Disconnect.”
*Bilateral Kinnex wearers will need to disconnect from one ankle to connect and
to the other ankle.
Resistance adjustments
Fine tuning resistance adjustments can be made by the patient as needed.
To adjust the stiness of the ankle, tap“Adjust” at the bottom of the
screen. Any adjustments made will be saved under this shoe (if you change
shoes and would like to keep these same resistance changes, you will
need to manually change them again once switching to the other shoes).
(Figure 1)
For use with Kinnex™App
Start the Kinnex App and tap“Connect”. Tap the
serial number (or custom name) of the ankle to
connect. The rst time you connect, you will be
prompted to press and release the Bluetooth
Button on the ankle unit, pairing the app with
the ankle.
*Note: The patient app will not be able to connect
when the ankle unit is in “clinician mode”.
(When it is in this mode, the blue light will be on
or blinking. To exit this mode, press and hold the
Bluetooth button until the blue light turns o.)
Shoes: Allows user to manage shoes (select, add, rename, delete)
Adjust: Allows user to make minor resistance settings that are specic to each shoe
Tools: Allows user to engage Manual Lock, Disconnect or Unpair device
Status: Displays ankle name, battery status, total steps, serial number, part number, rmware and App
versions
Help: Navigates user to appropriate help
Heel: Adjusts stiness of heel
Ankle: Adjusts stiness as the ankle rotates forward
Toe: Adjusts stiness of the toe
A
B
C
Figure 2
Keypad Buttons
There are three buttons on the front of the Kinnex ankle.
From top to bottom they are the Battery Status Button,
Change Footwear Button, and the Bluetooth Button. The
buttons are used to control and interact with the Kinnex
ankle when a mobile device is not available or desired.
(Figure 2)
Key Pad Button Functions
Battery / Power Status Button
• Check battery power levels
Change Footwear Button
• Change footwear and calibrate ankle to new
shoes
• Manual Lock feature
Bluetooth Button
• Pair ankle to smart device
A
B
C
™2.0
Figure 1
* Sliding to the right will increase stiness,
sliding to the left will decrease stiness
* These adjustments will be saved for cur-
rent pair of shoes and will return to other
settings saved under dierent shoes
Autres manuels pour Kinnex 2.0
3
Autres manuels Freedom Innovations Aide à la mobilité
Manuels Aide à la mobilité populaires d'autres marques
Rhythm Healthcare
Rhythm Healthcare B3800F Manuel utilisateur
AMF-BRUNS
AMF-BRUNS PROTEKTOR Manuel utilisateur
Drive DeVilbiss Healthcare
Drive DeVilbiss Healthcare OTTER Manuel utilisateur
Rhythm Healthcare
Rhythm Healthcare C500U Manuel utilisateur
Lumex
Lumex RJ4200A Manuel utilisateur
Rebotec
Rebotec Jumbo Manuel utilisateur