Page 3For technical questions, please call 1-888-866-5797.63050
SAFETYOPERATIONMAINTENANCE ASSEMBLY
7. Do not use with damaged or deteriorated
deck. Periodically coat wood decking and rails
with transparent (penetrating) wood preservative.
DO NOT PAINT OR USE OPAQUE SURFACE
SEALANTS. If there is a problem with rotting,
or decay, it must be visible during inspection in
order to prevent using a damaged platform.
8. Do not use for cantilever applications. Use
with supports directly underneath.
9. Rated working load: 900 lb. Total combined
weight of workers and materials must not exceed
rated working load. Do not overload. Distribute
load evenly. Be aware of dynamic loading!
Jumping on or dropping load may briefly
create excess load causing product failure.
10. Do not stack scaffold.
11. Position on hard level surface, level
the working/standing surface, and lock
wheels before getting on scaffold.
12. Do not use ladder or other climbing
device on top of scaffold.
13. Use guard rails, mid rails and toe
boards as required by local, state and
federal regulations. Using such safety
devices is always recommended.
14. Do not climb onto Scaffold from ladder
unless both Scaffold and ladder are secured
from movement in all directions.
15. Scaffolds that are covered in ice or snow
cannot be used until they are cleaned
off thoroughly. Scaffolds MUST NOT be
used during storms or in windy weather.
16. Do not ride on or transport items
on moving Scaffold.
17. Wear ANSI-approved safety goggles,
a hard hat, heavy-duty work gloves,
and OSHA specified safety harness
during assembly and use.
Wear additional safety gear as required
by local, state, and federal regulations.
18. Keep children away from Scaffold.
19. Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
20. Stay alert, watch what you are doing
and use common sense when using this
Scaffold. Do not use while you are tired or
under the influence of drugs, alcohol or
medication. A moment of inattention while
using may result in serious personal injury.
21. Only use safety equipment that has been approved
by an appropriate standards agency. Unapproved
safety equipment may not provide adequate
protection. Fall-arrest systems must be OSHA-
approved, eye protection must be ANSI-approved,
and breathing protection must be NIOSH-approved
for the specific hazards in the work area.
22. Store idle Scaffold out of the reach of children and
do not allow persons unfamiliar with the Scaffold to
climb on, or use it for any purpose. The Scaffold
is dangerous in the hands of untrained users.
23. Check for misalignment or binding of parts,
cracks and/or breakage of parts, and any other
condition that may affect safe operation. Many
accidents are caused by poorly maintained tools.
24. The warnings included in this manual are
intended to give general safety guidelines.
Scaffold safety regulations may change
periodically. The operator is responsible to be
familiar with and obey current OSHA guidelines
as well as local, state, and federal regulations
regarding the set up and use of this product.
25. Have Scaffold serviced by a qualified repair
person only. This will ensure that the
safety of this Scaffold is maintained.
26. Only use the included platform or an identical
replacement platform. The platform must
not extend beyond the base support.
27. Maintain labels and nameplates on the
Scaffold. These carry important safety
information. If unreadable or missing, contact
Harbor Freight Tools for a replacement.
28. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
SAVE THESE INSTRUCTIONS.
