Frank PYTHON C 048666 Manuel utilisateur

Operating instructions

Floor sander PYTHON C 3,2kW/50Hz

with gentle lifting lever

Item no 048666

Art. Nr. 049275

Reproduction on whole or in part requires written permission from

Hermann Frank GmbH & Co. KG, 75038 Oberderdingen, Germany.

No liability for any damage arising from the use of this brochure.

Subject to alterations.

Hermann Frank GmbH & Co. KG

Östliche Bahnhofstraße 8

75038 Oberderdingen

Germany

Tel.: +49 (0)72 58/60 88-0

Fax: +49 (0)72 58/60 88-11

[email protected]

www.hermannfrank.de

Operating instructions

Parquet floor sander Python C 3,2kW/50Hz

with gentle lifting lever

Stand: Februar 2008

302/2008

This brochure uses the symbol to mark important instructions for safety and preventing damage.

Please give special attention to the marked instructions.

They refer to a potentially dangerous situation. Failure to comply can result in fatal or severe injuries and

damage to property.

Operating instructions

Parquet floor sander Python C 3,2kW/50Hz

with gentle lifting lever

402/2008

Operating instructions

Parquet floor sander Python C 3,2kW/50Hz

with gentle lifting lever

Contents

1Introduction.................................................................................................................................... 6

2Scope of delivery........................................................................................................................... 7

3Machine specifications PYTHON C ............................................................................................. 8

3.1 Important components..................................................................................................................... 8

3.2 Technical data ................................................................................................................................. 9

3.3 Safety and machine protection facilities .......................................................................................... 9

4Proper use...................................................................................................................................... 9

5Installing the guide tube .............................................................................................................. 10

6Disassembling for transport ........................................................................................................ 11

6.1 Removing the guide tube ............................................................................................................... 11

6.2 Removing the motor ........................................................................................................................ 12

7Operating the PYTHON C ............................................................................................................ 14

7.1 Protective clothing and equipment ................................................................................................ 14

7.2 Fitting the dust bag ....................................................................................................................... 15

7.3 Safety instructions regarding dust .................................................................................................. 16

7.4 Disposing of sanding dust ............................................................................................................. 17

7.5 Replacing the sanding belt ............................................................................................................ 18

7.6 Adjusting the sanding pressure ..................................................................................................... 19

7.7 Safety instructions for electric cable and connectors .................................................................... 20

7.8 Connecting the PYTHON C to the mains power ........................................................................... 20

7.9 Remarks about sanding parquet and plank floors ......................................................................... 22

7.10 Sanding with the PYTHON C ........................................................................................................ 25

8Maintenance .................................................................................................................................. 30

8.1 Changing the sanding drum .......................................................................................................... 30

8.2 Adjusting the running wheels ......................................................................................................... 32

8.3 Adjusting the castor wheels ........................................................................................................... 34

8.4 Adjusting the tension roller ............................................................................................................. 35

8.5 Tightening the V-belts...................................................................................................................... 36

8.6 Guarantee........................................................................................................................................ 37

9Parts lists

......................................................................................................................................... 37

502/2008

Operating instructions

Parquet floor sander Python C 3,2kW/50Hz

with gentle lifting lever

1Introduction

Dear customer,

you have decided in favour of the FRANK parquet floor sander PYTHON C, the correct choice

with respect to quality and performance.

The PYTHON C is the result of a consistent implementation of many years of experience.

This machine combines an extraordinary high sanding performance and an excellent sanding

quality, together with an easy to operate, proven and reliable technology.

This operating instructions contain important informations for the use and safe operation of the

PYTHON C.

Caution!

Read these operating instructions carefully before assembling or operating the

PYTHON C. Ensure that all operators read these operating instructions prior to operate

the machine.

Adherence to the safety notes helps to protect against potential dangers for health and

personal safety and to prevent an improper utilisation of the machine.

Before starting to work, make yourself familiar with the operation of the machine. It's too

late if you do it while working!

Never allow anybody without sufficient skills and knowledge to operate the machine.

602/2008

Operating instructions

Parquet floor sander Python C 3,2kW/50Hz

with gentle lifting lever

702/2008

2Scope of delivery

1guide tube

2dust bag

3cable with plug and coupling

4lower part of the machine with motor

5wing screws (2 pieces)

6operating instructions

7hexagon socket screw key 5 mm

8hexagon socket screw key 6 mm

9hexagon socket screw key 10 mm

10 running wheel adjusting tool

11 tool pouch

12 fork wrench 10 mm

13 fork wrench 13 mm

14 fork wrench 24 mm

15 double fork wrench 30/36 mm

16 hearing protectors

17 respirator

18 Multiclip

Operating instructions

Parquet floor sander Python C 3,2kW/50Hz

with gentle lifting lever

3Machine specifications PYTHON C

3.1 Important components

1pressure regulating screw 11 bumper wheel

2castor wheels 12 belt guard

3running wheels 13 motor

4drum cover 14 switch box

5 V-belt tension screw 15 dust bag

6tension lever 16 cable arm

7knurled nut 17 left hand grip

8clamping lever 18 main lifting lever

9motor plug 19 right hand grip

10 carrying handle 20 gentle lifting lever

802/2008

Operating instructions

Parquet floor sander Python C 3,2kW/50Hz

with gentle lifting lever

902/2008

3.2 Technical data

Single-phase AC motor . . . . . . . . . . . . . . . . . . . . . . 240 V, 60 Hz

Motor power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3,2kW

Sanding drum speed . . . . . . . . . . . . . . . . . . . . . . . . . . 2100 rpm

Sanding width. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 mm

Sanding belt dimensions . . . . . . . . . 250 mm x 750 mm, endless

Machine weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 kg

3.3 Safety and machine protection facilities

PYTHON C is equipped with an

-overcurrent cutout and an

-no-volt release

The overcurrent cutout protects the machine from damage and persons from endangering in the

case of short circuits.

The no-volt release prevents uncontrolled restart of the machine after power failure. The motor

will not restart automatically when the power returns, it will have to be switched on again.

4Proper use

The parquet floor sander PYTHON C is suitable for dry sanding of parquet and plank

floors. No other use is allowed.

Caution!

Never use PYTHON for wet procedures (mortal risk from electric shock)!

Operating instructions

Parquet floor sander Python C 3,2kW/50Hz

with gentle lifting lever

5Installing the guide tube

Note: The Python C is delivered with the guide tube (1) removed.

Caution!

Injury to the operator or other persons could occur or damage could occur if the machine

starts up unintentionally. Disconnect the machine from the power supply before working

on the machine!

Instructions:

1. Insert the guide tube (1) into the guide tube support (7). The curved section of the tube must

face toward the motor. Clamp the guide tube by means of the clamping lever (6) located on

the guide tube support.

2. Fit the connector (8) into the both screws of th pull rod

3. Move the main lifting lever (2) into the rear position to raise the sanding drum from the floor.

4. Tighten both wing nuts

10 02/2008

Operating instructions

Parquet floor sander Python C 3,2kW/50Hz

with gentle lifting lever

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Frank Sander

Frank

Frank COBRA C Manuel utilisateur

Manuels Sander populaires d'autres marques

Oliver

Oliver 6305 Manuel utilisateur

Jet

Jet 22-44 Pro-3 Manuel de service

Makita

Makita M9204 Manuel

Makita

Makita M9204 Manuel utilisateur

Craftsman

Craftsman 351.215131 Manuel utilisateur

Clarke

Clarke Woodworker CBS1-5B Mode d’emploi

Chicago Pneumatic

Chicago Pneumatic CP9778 Manuel utilisateur

Nitto Kohki

Nitto Kohki BB-20 Manuel utilisateur

Ferm

Ferm FEOS-135 Manuel utilisateur

Unior

Unior 1510 Manuel utilisateur

stayer

stayer ls1200 Manuel utilisateur

Jet

Jet JSG-96 Manuel de service

Parkside

Parkside PDS 290 B2 Manuel utilisateur

Status

Status XPA Series Manuel utilisateur

Clarke

Clarke EZ Sand Manuel utilisateur

Craftsman

Craftsman 113.22521 Manuel utilisateur

Craftsman

Craftsman 113.225831 Manuel utilisateur

CLAS

CLAS OP 1429 Manuel utilisateur