Fox 40 Whistle Watch Manuel utilisateur
Fox 40
Whistle
Watch®
USER
MANUAL
609-0700
BUTTONS AND FEATURES ............................................................ 3
OPERATING THE WATCH .............................................................. 4
STOPWATCH MODE ...................................................................... 5
COUNTDOWN MODE ................................................................... 6
ALARM MODE ................................................................................. 7
BATTERY REPLACEMENT .............................................................. 8
CARE AND MAINTENANCE .......................................................... 8
CONTENTS
BUTTONS AND FEATURES
FEATURES:
• Time Function: hour, minute, second, date,
week, 12/24 hour format, 2 time zones.
• Stopwatch Function: 10 laps memory,
stopwatch range (0-23h 59m 59s).
• Countdown Function: countdown range
(0-99h 59m 59s).
• Alarm Function: Dual Alarm.
• EL backlight: press S2 at any time to
activate 3s backlight.
• Power Saving: Press S1 and S3 at the
same time and hold for 2s in any mode
to enter power saving mode; press S2
and S4 at the same time and hold for 2s
to switch from the power saving mode
to time mode.
S1
S2 S3
S4
The watch will be in the power saving
mode after your purchase. Press the
LIGHT and RESET buttons for 2
seconds at the same time to exit it.
3
OPERATING THE WATCH - TIME MODE
4
ALARM MODE
TIME MODE
STOPWATCH MODE
COUNTDOWN MODE
OPERATION:
• Press S1 to enter into Stopwatch Mode.
• Press S3 to switch between week/month display.
• Press S4 to turn on and off the beep.
• Press S4 and hold for 2s to the 2 time-zone (T2).
TIME SETTING:
• Press S2 for 2s to enter Time Setting Mode with
flashing “ADJ” shown.
• Press S1 to switch the setting items in the following order:
Hour-Minute-Second-Year-Month-Day-12/24H.
• Press S3/S4 key to increase/decrease the value. Press and
hold S3/S4 to rapidly increase/decrease the value. In setting
SECOND, if the value is less than 30 seconds, pressing
S3/S4 will decease it to zero; otherwise, it will add 1 minute.
• Press S2 to conrm setting and return to Time Mode.
•
When in 2 time zone (T2), only the hour and minute can be set.
Note:
If there is no operation
for 20 seconds, it will
automatically switch
back to Time Mode.
OPERATING THE WATCH - STOPWATCH MODE
INSTRUCTIONS:
• First Line: Show the Number of Laps recorded.
• Second Line: Display Minute, Second.
• Third Line: Display 1/100 second.
When the value is up to 60 minutes, the second line will display
hours & minutes, while the third line will shows seconds.
OPERATION:
• Press S3 to Start/Stop stopwatch function.
• During counting, press S4 to record lap time; up to 10 laps.
• When stopping counting, press S4 to clear the data and go
back to stopwatch mode.
DATA RECALL:
• Press S2 to enter Data Recall Mode when counting or to
stop counting.
• Press S3/S4 to go through the recorded time data.
•
Press S2 to exit data recall mode and go back to
stopwatch mode.
ALARM MODE
TIME MODE
STOPWATCH MODE
COUNTDOWN MODE
5
Note:
Unless starting a new
record, the recorded
time will not disappear,
even if you press S4
to clear the data.
OPERATING THE WATCH - COUNTDOWN MODE
INSTRUCTIONS:
• When countdown time is over 60 minutes, it will count down
with units of 1s; otherwise it will count down with units of
1/100s. Default countdown time is 1 hour. When counting
down to last 5s, there will be a short “beep” alert every second.
When the time is up, there will be a long “beep” sound.
OPERATION:
• Press S3 to start/stop counting
• When stopped counting, press S4 to reset
SETTING THE COUNTDOWN TIME:
• Press S2 for 2s to enter countdown time setting with
flashing “ADJ” shown
• Press S1 to switch the setting items: hour-minute-second
• Press S3/S4 key to increase/decrease the value.
Press and hold S3/S4 to rapidly increase/decrease the value.
• Press S2 to conrm setting and go back to countdown mode.
ALARM MODE
TIME MODE
STOPWATCH MODE
COUNTDOWN MODE
Note:
If there is no operation
for 20 seconds in the
setting mode, it will
confirm the setting and
go back to Countdown
Mode automatically.
6
OPERATING THE WATCH - ALARM MODE
INSTRUCTIONS:
• Dual Alarm: Alarm 1 and Alarm 2
• Alarm duration: 60s
• When alarm sounds, a ashing alarm symbol will be
displayed. Press any key to stop the alarm while it is ringing.
OPERATION:
• Press S3 to select Alarm 1 or Alarm 2.
• Press S4 to turn on/off the Alarm.
• Turning on the alarm, the alarm symbol will be displayed on
the upper right corner. Otherwise the symbol will disappear.
ALARM SETTING:
• In Alarm Mode, press S2 and hold for 2s to enter alarm
setting mode.
• Press S1 to switch the setting items: hour-minute.
• Press S3/S4 key to increase/decrease the value.
Press and hold S3/S4 to rapidly increase/decrease the value.
• Press S2 to conrm setting and go back to alarm mode.
ALARM MODE
TIME MODE
STOPWATCH MODE
COUNTDOWN MODE
7
ALARM MODE
TIME MODE
STOPWATCH MODE
COUNTDOWN MODE
Note:
If there is no operation
for 20 seconds in the
setting mode, it will
confirm the setting
and go back to alarm
mode automatically.
ALARM 2: SAME
AS ALARM 1
BATTERY REPLACEMENT
WARNING:
• Keep batteries away from children. If swallowed, contact a doctor
or emergency personnel immediately. Batteries contain chemical
substances. They should be disposed of properly according to
local regulations.
CARE AND MAINTENANCE:
• Never attempt to disassemble or service your unit it will void the warranty.
• Protect the unit from extreme heat, shocks, magnetic elds, electrical
noise and prolonged exposure to direct sunlight.
• Unit can be cleaned with a lightly moistened cloth. Apply mild soap
to the area if there are stubborn stains or marks.
• Do not expose unit to strong chemicals such as gasoline, clean
solvents, acetone, alcohol or insect repellents, as they may damage
the unit’s seal, case and nish.
• Do not swing, drop or step on the stopwatch.
• Do not wash the stopwatch or touch it with wet hands.
• Store the unit in a dry place when you are not using it.
• Keep the stopwatch out of reach of young children.
8
To avoid the possibility
of permanent damage,
we recommend taking
your stopwatch to a
local jeweler to have
the battery replaced.
When LCD becomes
dim, replace with a new
type CR2032 battery.
FOX 40 INTERNATIONAL INC. • FOX 40®REGISTERED TRADEMARK
Fox 40 International Inc.
340 Grays Road
Hamilton ON Canada L8E 2Z2
Tel: 905.561.4040
Fax: 905.578.5646
Email: [email protected]
www.fox40world.com
ALARM MODE
TIME MODE
STOPWATCH MODE
COUNTDOWN MODE
Table des matières
Autres manuels Fox 40 Montre
