Fostex VM200 Manuel utilisateur
ModelVM200
User’s Guide Addendum
(V1.01 toV1.02)
The VM200 software has been updated from V1.01 to V1.02 and some default
settings have been changed. In addition, a few new functions have been added.
Please read this addendum along with the User’s Guide.
2.Use the Data wheel or the [ /-1] or [+1/ ] key to select the desired EQ program number and name,
then press the [ENTER] key.
The following warning message appears, asking you if you wish to continue.
If you wish to delete the selected program, press the ENTER key. If you wish to cancel the
operation, press the [EXIT] key.
<Deleting a user EQ program>
1.Press the [RECALL] key and [STORE] key in the EQ Library section simultaneously.
The VM200 displays the EQ LIBRARY: CLEAR function page.
The VM200 deletes the selected Library data and returns to Channel Edit mode.
2.Use the Data wheel or the [ /-1] or [+1/ ] key to select the desired scene program number and
name, then press the [ENTER] key.
The following warning message appears, asking you if you wish to continue.
If you wish to delete the selected program, press the ENTER key. If you wish to cancel the
operation, press the [EXIT] key.
<Deleting a user scene>
1.Press the [RECALL] key and [STORE] key in the Scene Memory section simultaneously.
The VM200 displays the SCENE MEMORY: CLEAR function page.
The VM200 deletes the selected scene data and returns to Channel Edit mode.
<A scene recalled after initializing>
With the previous version, when you initialize the VM200 settings by selecting “ALL” for the
INITIALIZE ITEM parameter on the SETUP: SYSTEM 6: INITIALIZE function page, the current scene
display is not refreshed. With the new version, the current scene will be also initialized and preset
scene “P0: Init Mix” will be recalled.
FOSTEX CORPORATION
3-2-35 Musashino, Akishima-shi,Tokyo 196-0021, Japan
FOSTEX CORPORATION OF AMERICA
15431, Blackburn Ave., Norwalk, CA 90650, U.S.A.
C
PRINTED IN JAPAN JUNE 1999 8288 671 000 FX.
8288 671 000
Old version New version
RX CH OMNI 01
BLK DMP REQ. RX ON RX OFF
PROGRAM CHANGETX
PROGRAM CHANGE RX
ON
ON
OFF
OFF
Old version New version
FRAME MODE 24 25
* The FRAME MODE parameter on the SETUP: SYSTEM 1: CLOCK/MON page has been changed as
follows. CH ON RESP. and SOLO GAIN parameters have been added to the 1: CLOCK/MON page.
Refer to the next page of this addendum for more details.
* One of the Eff2 presets, “38:3D CHORUS” in the Effect Library has changed to “35: Dual DELAY.”
When you press the [EFF2] key in the Eff Edit section, the following page appears.
<Changed default settings>
* The RX CH, BLK DMP REQ., PROGRAM CHANGE TX and RX parameters found on the SETUP: MIDI, 1:
MIDI TX&RX page have been changed as follows:
* On the 2: CH COPY and 3: EQ COPY pages in the CH View section, some indications (that appear after
you select the source channel to copy) have been changed as shown in the circles below:
<New functions>
* The CH ON RESP. and SOLO GAIN parameters have been added to the SETUP: SYSTEM 1: CLOCK/MON
function page. These parameters are used to set the channel [ON] key response and adjust the SOLO
master gain respectively.
<CH ON RESP. function>
This function enables you to select the response speed at which the [ON] keys turn channel
mute on or off. You can select “FAST” or “SLOW.” The default setting is “FAST.” Use the EQ LO-
MID [Q] control to set this parameter, as shown above.
FAST
SLW
Parameter setting Description
Mute response is faster. Channels will be muted or turned on quickly. (default)
Mute response is slower. Channel sound will fade in or out slowly.
<SOLO GAIN function>
The SOLO GAIN parameter enables you to adjust a solo channel’s master gain. The default
setting is 0.0 (maximum). Turn the EQ HI [Q] control counter-clockwise to lower the gain.
Q
FREQ
GAIN
Q
FREQ
GAIN
Q
FREQ
GAIN
PAN
Q
PAN
PANPANPANPANPANPAN
EQ/LO EQ/LO-MID EQ/HI-MID EQ/HI
FREQ
GAIN
* Another new function enables you to delete any user effect programs, EQ programs, or scenes, using
the following steps.
2.Use theDatawheel orthe [ /-1]or [+1/ ]keyto selectthe desiredeffectprogramnumberand name,
and press the ENTER key.
The following warning message appears, asking you if you wish to continue.
If you wish to delete the selected program, press the ENTER key. If you wish to cancel the
operation, press the [EXIT] key.
<Deleting a user effect program>
1.Press the [RECALL] key and [STORE] key in the Eff Library section simultaneously.
The VM200 displays the EFF LIBRARY:CLEAR function page.
The VM200 deletes the selected Library data and returns to Channel Edit mode.
<Old version> <New version>
<Old version> <New version>
<Old version> <New version>
<Old version> <New version>
<Old version> <New version>
Parameter setting
Parameter setting
Autres manuels pour VM200
2
Autres manuels Fostex Logiciel
Fostex
Fostex DMT-8 Manuel utilisateur
Fostex
Fostex MR-8 MKII Instructions et recettes
Fostex
Fostex MR-8 MKII Mode d’emploi
Fostex
Fostex RD-8 Instructions d'installation et d'utilisation
Fostex
Fostex MR-8 MKII Manuel utilisateur
Fostex
Fostex MR-8 MKII Manuel utilisateur
Fostex
Fostex VF-08 Manuel utilisateur
Fostex
Fostex VF-160 Manuel utilisateur
Fostex
Fostex VF-08 Manuel utilisateur
Manuels Logiciel populaires d'autres marques
PS Audio
PS Audio PowerPlay Manuel du propriétaire
Brady
Brady LOCKOUT PRO 3.0 Manuel de service
Avaya
Avaya Interaction Center Manuel utilisateur
Texas Instruments
Texas Instruments TI-83 Plus Silver Edition Manuel
Novell
Novell GROUPWISE 8 - INTERNET AGENT Manuel utilisateur
Oracle
Oracle Application 9i Manuel utilisateur
Acer
Acer RDM Manuel utilisateur
Canon
Canon Vixia HF21 Manuel utilisateur
Canon
Canon ZR950 Manuel utilisateur
Samsung
Samsung Auto Backup Manuel utilisateur
Polycom
Polycom Vortex EF2201 Instructions d'installation et d'utilisation
Brocade Communications Systems
Brocade Communications Systems Brocade 8/12c Manuel utilisateur