Foss EyeFoss Manuel utilisateur

FOSS Analytical A/S, Foss Allé 1, DK-3400 Hillerød, Denmark

Tel Int +45 7010 3370, Fax +45 7010 3371, E-mail info@foss.dk

EyeFoss™

User Manual

6007 2981 / Rev. 10

EyeFoss™

User Manual

All information is liable to change without prior notice. For latest information about documentation

updates for your specific instrument, please contact your local FOSS representative..

Rev. Date of Issue Revised Material

1 2010-06-22 First edition

2 2013-07-12 General update

3 2014-11-20 Genereal update

4 2015-01-10 Update of safety information

5 2015-12-07 General update

6 2015-12-21 New part number. Safety chapters moved to “Safety Manual” (6007 2939).

7 2016-04-12 Legal Data and PC Requirements updated

8 2016-12-09 Updated to reflect Foss Integrator version 2. Various changes.

9 2017-07-01 Update of section 4.7 and 8.4

10 2018-02-26 SampleUI added (section 4.13)

EyeFoss™

User Manual 6007 2981 / Rev. 10

Table of Contents

1 Safety..................................................................1:1

1.1 General ........................................................................... 1:1

1.1.1 Safety Symbols ............................................................... 1:1

1.1.2 Safety Terminology ......................................................... 1:1

1.2 Personal Safety ............................................................. 1:1

1.2.1 General ........................................................................... 1:1

1.2.2 Laser ............................................................................... 1:2

1.3 Product Safety ............................................................... 1:3

1.4 Disposal Instructions ................................................... 1:4

1.5 Warranty Policy ............................................................. 1:4

1.6 Copyright of Embedded Software ............................... 1:5

1.7 Trademarks .................................................................... 1:5

1.8 Abbreviations ................................................................ 1:5

2 Introduction........................................................2:1

2.1 General ........................................................................... 2:1

2.2 Image Analysis .............................................................. 2:1

2.3 System Description ...................................................... 2:3

2.3.1 General Description ........................................................ 2:3

2.3.2 System Overview ............................................................ 2:4

2.3.3 Functional Description .................................................... 2:4

2.3.4 Start Button ..................................................................... 2:5

2.3.5 A Kernel’s Way Through an Analysis .............................. 2:6

2.3.6 Protection Cap ................................................................ 2:7

2.4 EyeFoss™ Software ..................................................... 2:8

3 Installation..........................................................3:1

4 Operating Instructions......................................4:1

4.1 Getting Started .............................................................. 4:1

4.2 Foss Integrator Start-up ............................................... 4:1

4.3 Installing a License ....................................................... 4:2

4.4 Importing a Prediction Model ...................................... 4:4

4.5 Setting Up a Product .................................................... 4:7

4.5.1 Creating Quick Job for Single Kernals Anaylsis ............ 4:12

4.6 Making a Zero Setting (Calibration) .......................... 4:15

4.7 Running a Self-test ..................................................... 4:19

EyeFoss™

User Manual 6007 2981 / Rev. 10

4.7.1 Viewing or Printing the Diagnostic Report .....................4:20

4.7.2 Explaination of the Diagnostic Report ...........................4:21

4.8 Analysing a Sample ....................................................4:23

4.8.1 Single Sample ...............................................................4:23

4.8.2 Multiple Samples ...........................................................4:25

4.9 Editing Sample Information ........................................4:27

4.10 Exporting Result ..........................................................4:28

4.10.1 Use of Other Templates ................................................4:30

4.11 Creating a New User ...................................................4:35

4.12 Mosaic Connection .....................................................4:38

4.12.1 Mosaic Settings .............................................................4:39

4.13 EyeFoss Simple UI ......................................................4:42

4.13.1 Launching SimpleUI ......................................................4:42

4.13.2 Using SimpleUI ..............................................................4:44

4.13.3 Closing SimpleUI ...........................................................4:45

5 Maintenance...................................................... 5:1

5.1 EyeFoss Maintenance ...................................................5:1

5.1.1 General ............................................................................5:1

5.1.2 Cleaning/replacement of Conveyor Belt ..........................5:1

5.1.3 Cleaning / Replacement of Belt Brush ............................5:3

5.1.4 Cleaning of Anti-Static Brush ..........................................5:4

5.1.5 Replacement of Fuses ....................................................5:4

5.1.6 Replacement of Filter ......................................................5:5

5.1.7 Software Maintenance .....................................................5:6

5.2 FOSS Service Visit ........................................................5:8

6 Troubleshooting ............................................... 6:1

6.1 Foss Integrator Troubleshooting .................................6:1

6.1.1 At Startup ........................................................................6:1

6.1.2 Communication Problems ...............................................6:1

6.1.3 In Foss Integrator ............................................................6:2

6.1.4 Module Problems ............................................................6:3

6.2 Communication Errors .................................................6:3

7 Parts, Accessories and

Consumables..............................................................7:1

8 Technical Specifications.................................. 8:1

8.1 Technical Data ...............................................................8:1

8.2 Installation Requirements ............................................8:1

EyeFoss™

User Manual 6007 2981 / Rev. 10

8.3 Performance Data ......................................................... 8:2

8.4 Legal Data ...................................................................... 8:2

8.5 PC Requirements .......................................................... 8:2

EyeFoss™

User Manual 6007 2981 / Rev. 10

EyeFoss™

User Manual 6007 2981 / Rev. 10 1:1

1 Safety

1.1 General

Please read the user manual carefully and use the instrument as advised. Follow all

safety precautions as instructed.

1.1.1 Safety Symbols

Explanation of safety symbols used in this manual.

1.1.2 Safety Terminology

Explanation of safety terms used in this manual.

1.2 Personal Safety

1.2.1 General

Warning

In order to find out the nature of the potential hazard, please

consult this manual in all cases where this symbol is used.

Warning

Unpacking, assembly and installation of the instrument should

be performed by a FOSS authorised service engineer.

Warning

The instrument is NOT to be operated in atmospheres which could

constitute an explosion risk.

Symbol Description

General hazard.

Electrical shock hazard.

Hot surface.

Laser hazard.

Crush hazard.

Term Description

Warning Danger to human safety.

Caution Danger to product performance / operation.

Note Important supplementary information.

EyeFoss™

1:2 User Manual 6007 2981 / Rev. 10

Warning

The marking labels must be visible to the operator and shall not

be removed from the instrument or made unreadable in any way.

Warning

EyeFoss is equipped with a earthed type power plug for your

protection against electric shock hazard and must be attached to

a properly grounded/earthed power outlet by using a power

cable (100-240 V AC) with protective earthing.

Warning

The instrument weighs 50 kg and must be lifted by at least two

persons, using the handles in instrument bottom or a lifting

device.

Warning

The cooling flange can reach a very high temperature. (This label

is placed on the cooling flange).

Warning

Risk of getting jammed when cleaning the conveyor belt.

Warning

Risk of getting jammed when cleaning the bottom of the feeder.

1.2.2 Laser

The EyeFoss is a Class I laser product and contains a laser. The laser is totally

shielded by the cabinet, and there is no risk of laser radiation during normal use.

The embedded laser is a Class 3B laser with the specifications:

• Max output of laser: 25 mW

• Led wavelength: 658 nm

Warning

Use of controls or adjustments or performance of procedures

other than those specified in this manual may result in hazardous

radiation exposure. There are no adjustment procedures for the

laser that are to be performed by the operator; all adjustments

are to be carried out by a qualified service engineer.

Warning

Make sure that there is no gap between the protection cap and

the metal sheet by securing the screw as the laser reflection can

be hazardous to the operator.

Warning

Avoid exposure to beam. The class 3b laser product is embedded

in the product. The camera unit cover must be mounted when the

instrument is switched on.

EyeFoss™

User Manual 6007 2981 / Rev. 10 1:3

Position of laser labels

Fig. 1:1 On the rear of the instrument

Fig. 1:2 On the camera unit cover

1.3 Product Safety

Caution

Do not disconnect power to EyeFoss while the instrument

software is being updated.

Caution

The operator should be aware that if the equipment is used in a

manner not specified by the manufacturer, the protection

provided by the equipment may be impaired.

Caution

The instrument is designed and tested for European (CE)

compliance. To ensure that this compliance is maintained,

connect only CE approved equipment. Connecting equipment

that is not CE approved may cause EMC incompatibility and

thereby affect the function of the instrument and other

equipment.

Caution

The system may only be repaired by personnel certified by FOSS.

FOSS recommends the use of original FOSS spare parts. If spare

parts from other are used, the warranty no longer applies.

Caution

If an ESD cap is provided, it should be mounted on any port not

being used.

CLASS 1 LASER PRODUCT

Complies with 21 CFR 1040.10 and 1040.11

except for deviations pursuant to laser

Notice No. 50, dated June 24. 2007

Complies with EN 60825-1:2007

CLASSE 1 PRODUIT LASER

Conforme à la norme 21 CFR 1040.10 et 1040.11

sauf pour les écarts en vertu de l'avisLaser Notice N° 50

du 24 juin 2007

Conforme à la norme EN60825-1:2007

EyeFoss™

1:4 User Manual 6007 2981 / Rev. 10

Caution

It is very important that all equipment connected to the EyeFoss,

i.e. computer or a printer, is connected to the same single power

outlet with protective ground as the EyeFoss. Differences in

ground potential between different power sources will disturb

communication or even destroy the communication line drivers.

Caution

The air circulation around the cooling flange must not be

inhibited. Leave uncovered with sufficient space for air

circulation at all times.

Caution

Make sure that the plug and the cord comply with local

requirements. Also make sure that the plug and the cord comply

with the instrument power consumption.

1.4 Disposal Instructions

Do not dispose of this electrical device with unsorted household

waste. Improper disposal may be harmful to environment and

human health. Please refer to your local waste authority for

information on return and collection systems in your area.

1.5 Warranty Policy

Warranty conditions are either specified on the order confirmation of the purchase

order together with the invoice, or in the contract with the FOSS representative and

only apply if:

• the Customer/User has followed all written instructions and documentation from

FOSS regarding the product

• the product has been installed, maintained, adjusted and calibrated according to

all descriptions and recommendations in the documentation

• the product has not been used for purposes other than those reasonably

contemplated by FOSS

• the product has not been altered or repaired with non-original FOSS parts or by

personnel not authorised by FOSS

• only original FOSS consumables and accessories or equivalents recommended

by FOSS have been used

• the product has not in any other ways been handled contrary to ordinary practice

• only software authorised by FOSS has been installed on any product PC

• any external product PC has complied with the recommendations of the FOSS

representative

• computer games have not been played on the PC, including any games

preinstalled together with the operating system.

• the instrument has been properly maintained, as recommended by FOSS.

Your instrument may contain parts that, due to wear during use of the instrument, are

expected to have a shorter lifetime than the instrument in general. These parts are

Table des matières

Autres manuels Foss Équipement de laboratoire

Foss

Foss Kjeltec 8100 Manuel utilisateur

Foss

Foss Soxtec 1047 Manuel utilisateur

Foss

Foss NIRS DS3 Manuel utilisateur

Manuels Équipement de laboratoire populaires d'autres marques

Qiagen

Qiagen DML 3000 Manuel utilisateur

Queensgate

Queensgate NANOSCAN OP400 Manuel de programmation

Conviron

Conviron GEN1000-GE Manuel utilisateur

Parr Instrument

Parr Instrument 4560 Mode d’emploi

IKA

IKA IC control Manuel utilisateur

Integra

Integra DOSE IT Manuel utilisateur

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manuel utilisateur

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manuel utilisateur

NI PXI-5422 Manuel

Collomix

Collomix Aqix Manuel utilisateur

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manuel utilisateur

Ocean Insight

Ocean Insight FLAME-NIR+ Manuel utilisateur

Parker

Parker ALIGN-MG-NA Manuel utilisateur

BD 644787 Manuel utilisateur

DENTAURUM

DENTAURUM Compact Megaplus Manuel utilisateur

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manuel utilisateur

VWR

VWR SAS Super IAQ Manuel utilisateur

illumina

illumina MiSeqDx Manuel utilisateur