Foscam FI8910W Manuel utilisateur

Foscam Digital Technologies LLC FI8910W Quick Installation Guide

- 1 -

Model: FI8910W

Quick Installation Guide

(For Windows OS)

(For MAC OS please go to page 17)

Indoor MJPEG Pan/Tilt Wireless IP Camera

Black White

Package Contents

IP Camera FI8910W with IR-Cut .x 1

DC Power Adapter (5V-2.0A) .x 1

Network Cable x 1

Wi-Fi Antenna .x 1

Mounting Bracket .x 1

Quick Installation Guide x 1

CD-ROM with Setup Software .x 1

Foscam Digital Technologies LLC FI8910W Quick Installation Guide

- 2 -

Quick Installation Guide For Windows OS

IP Camera FI8910W x 1

DC Power Adapter (5V-2.0A) x 1

Network Cable x 1

Wi-Fi Antenna .x 1

Mounting Bracket .x 1

Quick Installation Guide x 1

CD-ROM with Setup Software .x 1

Quick Installation Guide Flow Chart

P.12

Quick Installation Diagram

Package Contents

Wireless Connection Setup

Remote Access Setup

Software Installation

Hardware Installation

Foscam Digital Technologies LLC FI8910W Quick Installation Guide

- 3 -

1) Open the package. Take the camera out of the box carefully.

2) Mount the antenna. Then take the Wi-Fi antenna, mount it on the SMA connector on the

back of the camera, screw the antenna into the port, and make the antenna stand vertically.

Mount the antenna Plug in the network cable

3) Get the camera connected to the router, and insert the power plug.

Use the network cable to connect the camera to the router or the switch in the LAN network at

your home or your office. Plug in the power. The green network light at the rear of the camera will

blink and the camera will automatically pan/tilt. The red power light will also turn on.

Insert the CD into the CD drive of your computer and find the folder “For Windows OS”. Copy the IP

camera tool to your computer and start the program or double click on the setup file to install.

IP Camera Tool icon

1. Hardware Installation

Start Installation

2. Software Installation

Foscam Digital Technologies LLC FI8910W Quick Installation Guide

- 4 -

Once the IP camera tool software is installed, double click the icon on the desktop and the following

screen should appear.

IP Camera Tool for Windows

The IP camera tool should find your camera’s IP address automatically (your IP address may be

different) after you plug in the network cable. If not, please make sure that DHCP is enabled on your

router and that MAC address filtering, firewalls and anti-virus are disabled temporarily until the

camera is set up.

Double click the IP address of the camera; your default browser will open to the camera login page.

3. Login to the Camera

Foscam Digital Technologies LLC FI8910W Quick Installation Guide

- 5 -

If it is your first time logging into the camera using Internet Explorer, click the “ActiveX Mode” button.

This mode is used for Internet Explorer. It will then prompt you to download the ActiveX plugin.

In the above screenshot, we see a grey screen for camera video and a red “X” in the top left corner.

This indicates that our ActiveX controls are not configured properly.

Usually in Internet Explorer versions 8 or later, you will see a pop up box at the bottom of the screen,

which asks if you would like to allow the ActiveX control module to run for the camera. Click “Allow.”

Once you login again, you should be able to see live camera video.

Foscam Digital Technologies LLC FI8910W Quick Installation Guide

- 6 -

If you are logging into the camera using a server-push browser like Google Chrome or Mozilla

Firefox, you would click on the “Server Push Mode” button, which is used for these browsers.

In Chrome or Firefox you will need to push the second login button on the login page. From there,

you will be prompted to enter the username and password for the camera. Type in admin for the

username, and leave the password field blank. Then push enter or click “Log In.”

Once logged in, click the “Live Video” button on the left side of the page and it will take you to the live

video feed for the camera.

Foscam Digital Technologies LLC FI8910W Quick Installation Guide

- 7 -

Congratulations! You have succeeded in accessing the camera by a wired connection. Be sure to

leave all other menu options alone until finishing the rest of the installation.

USE THIS QR CODE WITH YOUR PHONE TO SEE OUR

VIDEO SETUP GUIDES FOR PC ON BASIC SETUP,

WIRELESS SETUP, PORT FORWARDING, AND MORE!

Foscam Digital Technologies LLC FI8910W Quick Installation Guide

- 8 -

4.1 Infrastructure Mode

Step 1: Choose “For Administrator”or “Device Management” on the live video page, and then

click on the “Wireless LAN Settings” option on the left side of the screen. You can click “Scan”

here to scan for wireless networks, which should display your own network. Make sure you are not

hiding your SSID, or it will not be detected.

Step 2: Click the SSID (name of your router) in the list, the corresponding information related to your

network, such as the name and the encryption, will be filled into the relevant fields automatically.

NOTE: Sometimes the information filled in may differ from your true network settings. If you

are unable to connect wirelessly make sure the encryption within your router is correct and

the encryption selected on the page for your wireless network is correct. Try using different

encryptions if you aren’t able to connect with a certain type of encryption.

You will only need to fill in the password of your network. This is listed as “Share Key” on the

wireless settings page. If your password to connect to the internet for your router is 1234567890, you

would put 1234567890 in the “Share Key” field. On the same note, if your password is something like

foscam12345, you would put in foscam12345 in the field. Again, make sure that the SSID,

Encryption and the password you filled in are exactly the same for your router.

4. Wireless Connection Setup

Foscam Digital Technologies LLC FI8910W Quick Installation Guide

- 9 -

Wireless Settings

Step 3: Click on the Submit button after all settings have been entered. The camera will restart after

30 seconds. Once the countdown ends, take the network cable out of the camera. Never shut down

the power of the camera until the IP camera is able to connect to the wireless network.

The LAN IP address will disappear on the window of IP Camera Tool when the camera is configuring

a wireless connection. Wait about 1 minute, the camera should obtain a wireless connection, and the

LAN IP of the camera will show again on the window of the IP Camera Tool. The IP address may

have changed after the camera receives a wireless connection; we recommend setting a static local

IP address if this IP address changes by right clicking the camera in IP Camera Tools, setting a

static IP, and pushing OK (see Page 11). Congratulations! You have set up the wireless connection

of the camera successfully.

If you fail to make a wireless connection, please refer to your seller or contact us directly for

assistance.

USE THIS QR CODE WITH YOUR PHONE TO SEE OUR

VIDEO SETUP GUIDES FOR PC ON BASIC SETUP,

WIRELESS SETUP, PORT FORWARDING, AND MORE!

Foscam Digital Technologies LLC FI8910W Quick Installation Guide

- 10 -

4.2 WPS (Wi-Fi Protected Set-up)

WPS allows you to set up wireless connectivity automatically if you have a WPS-compatible router.

The WPS button on the Foscam camera is shared with the reset button. Use the small end of a

paperclip or a toothpick to press and hold the RESET button for four seconds and let go.

Next, press the WPS button on your router within 60 seconds. The WPS button is usually on the

back or on the side of your router. On some routers, you may need to log in to the web interface and

click on an on-screen button to activate the WPS feature. If you are not sure where the WPS button

is on your router, please refer to your router’s User Manual.

The camera will automatically create a secure wireless connection to your router. If you have

plugged in the network cable, you can disconnect it at this time. While connecting, the green network

light will blink quickly and the wireless settings will take effect. The IP Camera Tool will search for the

camera’s LAN IP address. Make sure that the PC and the camera share the same subnet.

NOTE: When setting up the WPS Settings, you must press the Reset button only for four seconds,

or else the camera may reset itself back to factory default settings if you press and hold the reset

button for 10 seconds or more.

For WPS, the security mode of the router cannot be WEP, or else the WPS settings may fail.

Reset Button

Autres manuels pour FI8910W

Table des matières

Autres manuels Foscam Caméra de sécurité

Foscam

Foscam FI8910W Manuel utilisateur

Foscam

Foscam T5EP Manuel utilisateur

Foscam

Foscam FI8910W Manuel utilisateur

Foscam

Foscam FI9803P V2 Manuel utilisateur

Foscam

Foscam FI8601 Manuel utilisateur

Foscam

Foscam FI8918W Instructions d'utilisation et d'entretien

Foscam

Foscam FI8620 Manuel utilisateur

Foscam

Foscam FI9926P Manuel utilisateur

Foscam

Foscam FI9928P Manuel utilisateur

Foscam

Foscam FI9851P Manuel utilisateur

Foscam

Foscam Synology DS218play Manuel utilisateur

Foscam

Foscam E1 Mode d’emploi

Foscam

Foscam R3 Manuel utilisateur

Foscam

Foscam FI8910W Manuel utilisateur

Foscam

Foscam R2 Manuel utilisateur

Foscam

Foscam FI8910W Manuel utilisateur

Foscam

Foscam V4EC Manuel utilisateur

Foscam

Foscam FI8905E Manuel utilisateur

Foscam

Foscam FI9818W V2 Manuel utilisateur

Foscam

Foscam FI9831P V2 Manuel utilisateur

Foscam

Foscam FN3108XE-B4-1T Manuel utilisateur

Foscam

Foscam FI8916W Manuel utilisateur

Foscam

Foscam X2 Manuel utilisateur

Foscam

Foscam SD2 Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur