Foscam D2EP Manuel utilisateur

FHD Security Camera

V1.0.9

305503000462

User Manual • Uživatelský manuál •

Užívateľský manuál • Használati utasítás •

Benutzerhandbuch

Dear customer,

The user manual for the product contains the product functions, method of use and

operating procedure. Read the user manual carefully to get the best experience and

avoid unnecessary damage. Keep the manual for future reference.

WARNING

Do not use the product in violation of local laws and regulations. A user who violates

local laws and ordinances will be held responsible for all consequences of purchasing

and using the product.

Alza.cz a.s. is not responsible for any violation of local laws and regulations by the user.

✉www.alza.co.uk/kontakt

✆+44 (0)203 514 4411

Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

Setting Up Your Foscam Security Camera

1. Getting Started

Package Contents

IP Camera Power Adapter

Ethernet Cable Quick Setup Guide

Security tips

•Please change the camera’s password regularly, using a combination of numbers,

letters and special characters.

•We recommended that you regularly update your camera with latest available

software and firmware to ensure the best experience with your camera.

2. Physical Description

LENS

Array LED

LAN

Audio In/Out

Power

Reset Button

3. Setting Up Your Camera: Wired Connection via Foscam

App

Before you get started

Scan the QR code below to download and install the Foscam APP:

To ensure a smoother video experience on your smart phone, it is recommended that

you smart phone meet the following specifications:

•iOS: version 8.1 or higher.

•Android: 4.1 or higher, using a device with Graphics Processing Unit (GPU)

NOTE: For the best experience, please update the APP to the latest version!

Wired Connection

1. Connect the camera to your router with an Ethernet cable.

2. Plug the power adapter into the camera, and then wait for about 1 minute.

3. Make sure your smart phone is connected to the same Wi-Fi network as the camera.

TIPS You need to connect the 2.4 GHz network Wi-Fi router is dual-band –most never

routers have both 2.4GHz and 5GHz channels. For example SSID: XXXXX_2.4G.

4. Open the foscam APP and please register a Foscam account, or sign in if you have one

already.

5. After logging into Foscam APP, select “Tap to add a camera” or “+” icon on the upper

right corner, then select “Scan the QR code” and scan the QR code that labeled at the

bottom of your camera.

Tap + icon select “Scan the code” Scan the QR code

which is located at the

bottom of your camera.

6. Wait for a few seconds and then you can set the camera name and tap “Save” IN “Set

name” interface.

Camera added successfully and

name has been set

NOTE: If the adding process fails, please reset your camera and try adding again

according to the above method.

Reset Button

7. Tapping on the play button in the video box will jump to the “Camera Login” setting

interface. For your security, please set a new username and password for your camera

before viewing live video.

Tap Set a new username

and password

8. After completing the above steps, you can begin using your camera.

4. Other ways to access your camera

•Foscam VMS

Foscam VMS is a new tool for PCs. It does not require plug-in and is compatible with

Windows & Mac, supporting all Foscam HD cameras and up to 36 cameras at the same

time. If you would like to manage multiple cameras, we suggest you install Foscam VMS.

You can download the “Foscam VMS” Windows version from foscam.com/vms, and can

download the “Foscam VMS” Mac version from the APP store:

https://apps.apple.com/cn/app/foscamvms/id1521202507?mt=12.

NOTE: For the best experience, please update Foscam VMS to the latest version!

Add the IP Camera

1. Run Foscam VMS, then create a local administrator account and login.

2. Tap the “+” icon on the Foscam VMS and follow the setup wizard to add your camera.

Please visit foscam.com/downloads to view the user manual and for additional detailed

steps.

•Foscam Cloud Service

You can access the camera via the Foscam Cloud website:

https://www.myfoscam.com

Some benefits of viewing your camera in the cloud:

•It is simple and convenient to remotely access and manage all your Wi-Fi security

cameras.

•Enjoy the latest features first through Foscam Cloud including cloud storage and

more.

•Getting started is fast –if you have already registered an account in the Foscam

App, you can directly use the same login credentials for Foscam Cloud.

5. Hardware Installation

1. Loosen the three screws on the cover of the device, and remove the cover.

2. Insert a micro SD into the SD card slot (optional; for local storage).

3. Install the mounting plate in the area to be monitored.

NOTE: Please drill a middle hole in the mounting plate if you want to wire the camera

through the top.

For the best visual, we suggest mounting the camera in a position that is at least 30cm

(11.8in) away from the left and right walls.

4. Install the base of the device on the desired using the included expansion screws.

Cement Wall Wooden Wall

5. Wiring

•Pass the wire out through the gap at the base, or through a drilled hole.

•Connect the camera to your LAN (Local Area Network of Internet router) via

Ethernet cable.

•Power on the device.

6. Turn the angle of the lens manually.

7. Finally, fasten the cover and the base together with screws.

NOTE: Do not block the Array LED when rotating the casing, so as to not affect the night

vision.

6. Important Notice

•Camera Username & Password

The camera username & password are used to access and manage your camera. Having

a strong can significantly improve the security of your camera.

If you have forgotten either of them, please press the “Reset” button and hold it for

more than 10 seconds while the camera is powered on. After release the button. The

camera will automatically reboot and the default settings will be restored.

You can then reconnect the camera by following this Quick Setup Guide.

•Foscam Cloud Service Account Username & Password

Your Foscam Cloud service account and password may be used to access both the

Foscam App and then Foscam Cloud service website. Therefore, you can register your

account username & password on either one.

•Storage Media

You camera supports cloud, NVR (Network Video Recorder), and Micro SD card (only

supports FAT-32 format) storage formats. If you wish to record and play back large

amounts of video, we recommend using a Foscam NVR device as well.

•Firmware Upgrade

You can upgrade the firmware of your camera with the Foscam App by using the new

“One-Key Online Upgrade” feature (Open the Foscam App and Login to the camera,

select Settings > Firmware Upgrade).

You also can download the latest version to upgrade your camera from our official

website foscam.com/upgrades.

•Safety Tips

Please ensure that the proper power supply is used before using the camera.

Please install the camera securely using the screw provided.

Please use this product within the temperature range. When the ambient temperature is

too high or too low, it may cause product failure.

To avoid the risk of fire or electric shock, please keep your camera connectors in a cool,

dry place.

Please keep the camera out of reach of small children.

This product is not a toy; children should use the product under adult supervision.

Change your default port to a greater range to help ensure the safety of your

connection. How to change the default port: please visit foscam.com/downloads to view

the user manual.

Check the logs of your Foscam cameras frequently. Foscam Cameras have embedded

logs reminding telling you which IP addresses are accessing the camera.

The cords on this product are a potential strangulation hazard For child safety, please

keep these cords out of the reach of children.

Autres manuels pour D2EP

Table des matières

Langues :

Autres manuels Foscam Caméra de sécurité

Foscam

Foscam FI8608 Manuel utilisateur

Foscam

Foscam V5P Manuel utilisateur

Foscam

Foscam C2M Manuel utilisateur

Foscam

Foscam FI9938B Manuel utilisateur

Foscam

Foscam FI9926P/Z2 Manuel utilisateur

Foscam

Foscam G4EP-W Manuel utilisateur

Foscam

Foscam FI8904W Manuel utilisateur

Foscam

Foscam 305503000601 Manuel utilisateur

Foscam

Foscam C2M Manuel utilisateur

Foscam

Foscam FI8905E Manuel utilisateur

Foscam

Foscam FI8620 Manuel utilisateur

Foscam

Foscam SD2X Manuel utilisateur

Foscam

Foscam SD2 Manuel utilisateur

Foscam

Foscam FI9804W Manuel utilisateur

Foscam

Foscam FI9805W Manuel utilisateur

Foscam

Foscam G2EP QJ2 FI9912EP Manuel utilisateur

Foscam

Foscam FI8910W Manuel utilisateur

Foscam

Foscam FI8910W Manuel utilisateur

Foscam

Foscam FI9902P Manuel utilisateur

Foscam

Foscam FI8918W Manuel utilisateur

Foscam

Foscam D4Z Manuel utilisateur

Foscam

Foscam G2EP Manuel utilisateur

Foscam

Foscam E1 Mode d’emploi

Foscam

Foscam HD Wireless IP Camera Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur