Foscam WD-R1200U Manuel
Wireless Range Extender
2.4G / 5G
Plug in your wi extender
Normal:
Plug in the power and wait for 5
senconds. The 2 WiFi (2.4G and 5G)
light will turn green.
Mobile phone setup
1
Abnormal:
Please press the "Reset" button on
the side of the product for more
than 8 seconds, or contact seller.
Connect your extender SSID
2
Both 2.4G and 5G are available,
choose one to set.
Note:
You can not Surf on the Internet untill
you nish all the setting steps.
“XXXX”is the last 4 letters of MAC
Address which appears at the back of
product.
Sign in to management page
(e.g.Internet Explorer/Edge/Chrome/Firefox/Safari)
3
Enter the default password: admin
4
Scan and select your host router SSID
5
Enter the password of your host router
6
Note:
Please make sure of the right
password (special characters not
allowed, like”%” )
Set your Extender SSID and passord
7
Check datails and make a note of the
Wireless info
8
When you nished setting, please wait
30-40s until extender light is on
9
The light light up, that means
the Exterder Mode successfully.
10
Note:
Reconnect your extender wi
10 10
11
Note:
After check, click “Start
Connect” and wait
30-60 seconds.
.....|
Note:
Please make sure that you have
connected the SSID
(wifi-5g-XXXX) of the wi
extender successfully, most of the
PC / smart will recognize and Sign
in to the management page
automatically.
If not, please enter 192.168.188.1
on the new browser.
V1.0
After the setting is completed, please observe the signal indicator.
If it lights up, it means that the relay is successful. Please
connect CSG-pro to the Internet! otherwise reconnect.
Please wait 34 seconds
Both of 2.4G and 5G
can be extended,
choose only one each
time.
Default SSID:
orignal SSID+Pro+2.4G/5G,
can be changed
Default router password
The light light up, that
means the Exterder Mode
successfully.
Plug in your wi extender
PC setup step
1
Abnormal:
Please press the "Reset" button on
the side of the product for more
than 8 seconds, or contact seller.
Connect your extender SSID
2
Note:
You can not Surf on the Internet untill
you nish all the setting steps.
“XXXX”is the last 4 letters of MAC
Address which appears at the back of
product.
Sign in to management page
(e.g.Internet Explorer/Edge/Chrome/Firefox/Safari)
3
Enter the default password: admin
4
Scan and select your host router SSID
5
Enter the password of your host router
6
Note:
Please make sure of the right
password (special characters not
allowed, like”%” )
Set your Extender SSID and passord
7
Check datails and make a note of the
Wireless info
8
When you nished setting, please wait
30-40s until extender light is on
9
The light light up, that means
the Exterder Mode successfully.
Note:
Reconnect your extender wi
Dierent Channels working
together would interfere
signal, and the network
speed will get slow. please
change the main router
channel in time.
10
10 10
11
Note:
After check, click “Start
Connect” and wait
30-60 seconds.
admin
csg12321
∨
V1.0
After the setting is completed, please observe the signal indicator.
If it lights up, it means that the relay is successful. Please
connect CSG-pro to the Internet! otherwise reconnect.
Please wait 34 seconds
Normal:
Plug in the power and wait for 5
senconds. The 2 WiFi (2.4G and 5G)
light will turn green.
Both 2.4G and 5G are available,
choose one to set.
Note:
Please make sure that you have
connected the SSID
(wifi-5g-XXXX) of the wi
extender successfully, most of the
PC / smart will recognize and Sign
in to the management page
automatically.
If not, please enter 192.168.188.1
on the new browser.
Both of Wireless of 2.4G
and 5G can be
extended, choose only
one each time.
Default SSID:
orignal SSID+Pro+2.4G/5G,
can be changed
Recommend
Default router password,
can be changed
The light light up, that
means the Exterder Mode
successfully.
Wireless Range Extender
2.4G / 5G
Autres manuels pour WD-R1200U
1
Autres manuels Foscam Extenseur
